1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
|
/*
* drivers/net/phy/at803x.c
*
* Driver for Atheros 803x PHY
*
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_STATUS 0x13
#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
#define AT803X_WOL_ENABLE 0x01
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
#define AT803X_INER 0x0012
#define AT803X_INER_INIT 0xec00
#define AT803X_INSR 0x0013
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
#define ATH8035_PHY_ID 0x004dd072
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
struct at803x_priv {
bool phy_reset:1;
struct gpio_desc *gpiod_reset;
};
struct at803x_context {
u16 bmcr;
u16 advertise;
u16 control1000;
u16 int_enable;
u16 smart_speed;
u16 led_control;
};
/* save relevant PHY registers to private copy */
static void at803x_context_save(struct phy_device *phydev,
struct at803x_context *context)
{
context->bmcr = phy_read(phydev, MII_BMCR);
context->advertise = phy_read(phydev, MII_ADVERTISE);
context->control1000 = phy_read(phydev, MII_CTRL1000);
context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
}
/* restore relevant PHY registers from private copy */
static void at803x_context_restore(struct phy_device *phydev,
const struct at803x_context *context)
{
phy_write(phydev, MII_BMCR, context->bmcr);
phy_write(phydev, MII_ADVERTISE, context->advertise);
phy_write(phydev, MII_CTRL1000, context->control1000);
phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
}
static int at803x_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *ndev = phydev->attached_dev;
const u8 *mac;
int ret;
u32 value;
unsigned int i, offsets[] = {
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
};
if (!ndev)
return -ENODEV;
if (wol->wolopts & WAKE_MAGIC) {
mac = (const u8 *) ndev->dev_addr;
if (!is_valid_ether_addr(mac))
return -EFAULT;
for (i = 0; i < 3; i++) {
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_DEVICE_ADDR);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
offsets[i]);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_FUNC_DATA);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
}
value = phy_read(phydev, AT803X_INTR_ENABLE);
value |= AT803X_WOL_ENABLE;
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
} else {
value = phy_read(phydev, AT803X_INTR_ENABLE);
value &= (~AT803X_WOL_ENABLE);
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
}
return ret;
}
static void at803x_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
u32 value;
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
value = phy_read(phydev, AT803X_INTR_ENABLE);
if (value & AT803X_WOL_ENABLE)
wol->wolopts |= WAKE_MAGIC;
}
static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
mutex_lock(&phydev->lock);
value = phy_read(phydev, AT803X_INTR_ENABLE);
wol_enabled = value & AT803X_WOL_ENABLE;
value = phy_read(phydev, MII_BMCR);
if (wol_enabled)
value |= BMCR_ISOLATE;
else
value |= BMCR_PDOWN;
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_resume(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->dev;
struct at803x_priv *priv;
struct gpio_desc *gpiod_reset;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpiod_reset))
return PTR_ERR(gpiod_reset);
priv->gpiod_reset = gpiod_reset;
phydev->priv = priv;
return 0;
}
static int at803x_config_init(struct phy_device *phydev)
{
int ret;
ret = genphy_config_init(phydev);
if (ret < 0)
return ret;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
ret = phy_write(phydev, AT803X_DEBUG_ADDR,
AT803X_DEBUG_SYSTEM_MODE_CTRL);
if (ret)
return ret;
ret = phy_write(phydev, AT803X_DEBUG_DATA,
AT803X_DEBUG_RGMII_TX_CLK_DLY);
if (ret)
return ret;
}
return 0;
}
static int at803x_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, AT803X_INSR);
return (err < 0) ? err : 0;
}
static int at803x_config_intr(struct phy_device *phydev)
{
int err;
int value;
value = phy_read(phydev, AT803X_INER);
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, AT803X_INER,
value | AT803X_INER_INIT);
else
err = phy_write(phydev, AT803X_INER, 0);
return err;
}
static void at803x_link_change_notify(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
/*
* Conduct a hardware reset for AT8030 every time a link loss is
* signalled. This is necessary to circumvent a hardware bug that
* occurs when the cable is unplugged while TX packets are pending
* in the FIFO. In such cases, the FIFO enters an error mode it
* cannot recover from by software.
*/
if (phydev->drv->phy_id == ATH8030_PHY_ID) {
if (phydev->state == PHY_NOLINK) {
if (priv->gpiod_reset && !priv->phy_reset) {
struct at803x_context context;
at803x_context_save(phydev, &context);
gpiod_set_value(priv->gpiod_reset, 0);
msleep(1);
gpiod_set_value(priv->gpiod_reset, 1);
msleep(1);
at803x_context_restore(phydev, &context);
dev_dbg(&phydev->dev, "%s(): phy was reset\n",
__func__);
priv->phy_reset = true;
}
} else {
priv->phy_reset = false;
}
}
}
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
.phy_id = ATH8035_PHY_ID,
.name = "Atheros 8035 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8030 */
.phy_id = ATH8030_PHY_ID,
.name = "Atheros 8030 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8031 */
.phy_id = ATH8031_PHY_ID,
.name = "Atheros 8031 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
} };
module_phy_driver(at803x_driver);
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
{ ATH8030_PHY_ID, 0xffffffef },
{ ATH8031_PHY_ID, 0xffffffef },
{ ATH8035_PHY_ID, 0xffffffef },
{ }
};
MODULE_DEVICE_TABLE(mdio, atheros_tbl);
|
