/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/include/ "artpec3.dtsi"

/ {
	model = "Axis P1343 Network Camera";
	compatible = "axis,p1343";

	aliases {
		serial0 = &uart0;
	};

	soc {
		uart0: serial@b003e000 {
			status = "okay";
		};
	};

	i2c {
		compatible = "i2c-gpio";
		gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>;
		i2c-gpio,delay-us = <2>;
		#address-cells = <1>;
		#size-cells = <0>;

		rtc@51 {
			compatible = "nxp,pcf8563";
			reg = <0x51>;
		};
	};

	leds {
		compatible = "gpio-leds";

		status_green {
			label = "status:green";
			gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>;
			linux,default-trigger = "heartbeat";
		};

		status_red {
			label = "status:red";
			gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>;
		};

		network_green {
			label = "network:green";
			gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>;
		};

		network_red {
			label = "network:red";
			gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>;
		};

		power_red {
			label = "power:red";
			gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>;
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		activity-button@0 {
			label = "Activity Button";
			linux,code = <KEY_FN>;
			gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>;
		};
	};
};

if ARCH_MMP

menu "Marvell PXA168/910/MMP2 Implmentations"

config MACH_ASPENITE
	bool "Marvell's PXA168 Aspenite Development Board"
	select CPU_PXA168
	help
	  Say 'Y' here if you want to support the Marvell PXA168-based
	  Aspenite Development Board.

config MACH_ZYLONITE2
	bool "Marvell's PXA168 Zylonite2 Development Board"
	select CPU_PXA168
	help
	  Say 'Y' here if you want to support the Marvell PXA168-based
	  Zylonite2 Development Board.

config MACH_AVENGERS_LITE
	bool "Marvell's PXA168 Avengers Lite Development Board"
	select CPU_PXA168
	help
	  Say 'Y' here if you want to support the Marvell PXA168-based
	  Avengers Lite Development Board.

config MACH_TAVOREVB
	bool "Marvell's PXA910 TavorEVB Development Board"
	select CPU_PXA910
	help
	  Say 'Y' here if you want to support the Marvell PXA910-based
	  TavorEVB Development Board.

config MACH_TTC_DKB
	bool "Marvell's PXA910 TavorEVB Development Board"
	select CPU_PXA910
	help
	  Say 'Y' here if you want to support the Marvell PXA910-based
	  TTC_DKB Development Board.

config MACH_BROWNSTONE
	bool "Marvell's Brownstone Development Platform"
	depends on !CPU_MOHAWK
	select CPU_MMP2
	help
	  Say 'Y' here if you want to support the Marvell MMP2-based
	  Brown Development Platform.
	  MMP2-based board can't be co-existed with PXA168-based &
	  PXA910-based development board. Since MMP2 is compatible to
	  ARMv7 architecture.

config MACH_FLINT
	bool "Marvell's Flint Development Platform"
	depends on !CPU_MOHAWK
	select CPU_MMP2
	help
	  Say 'Y' here if you want to support the Marvell MMP2-based
	  Flint Development Platform.
	  MMP2-based board can't be co-existed with PXA168-based &
	  PXA910-based development board. Since MMP2 is compatible to
	  ARMv7 architecture.

config MACH_MARVELL_JASPER
	bool "Marvell's Jasper Development Platform"
	depends on !CPU_MOHAWK
	select CPU_MMP2
	help
	  Say 'Y' here if you want to support the Marvell MMP2-base
	  Jasper Development Platform.
	  MMP2-based board can't be co-existed with PXA168-based &
	  PXA910-based development board. Since MMP2 is compatible to
	  ARMv7 architecture.

config MACH_TETON_BGA
	bool "Marvell's PXA168 Teton BGA Development Board"
	select CPU_PXA168
	help
	  Say 'Y' here if you want to support the Marvell PXA168-based
	  Teton BGA Development Board.

config MACH_GPLUGD
	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
	select CPU_PXA168
	help
	  Say 'Y' here if you want to support the Marvell PXA168-based
	  GuruPlug Display (gplugD) Board

config MACH_MMP_DT
	bool "Support MMP (ARMv5) platforms from device tree"
	select USE_OF
	select PINCTRL
	select PINCTRL_SINGLE
	select COMMON_CLK
	select ARCH_HAS_RESET_CONTROLLER
	select CPU_MOHAWK
	help
	  Include support for Marvell MMP2 based platforms using
	  the device tree. Needn't select any other machine while
	  MACH_MMP_DT is enabled.

config MACH_MMP2_DT
	bool "Support MMP2 (ARMv7) platforms from device tree"
	depends on !CPU_MOHAWK
	select USE_OF
	select PINCTRL
	select PINCTRL_SINGLE
	select COMMON_CLK
	select ARCH_HAS_RESET_CONTROLLER
	select CPU_PJ4
	help
	  Include support for Marvell MMP2 based platforms using
	  the device tree.

endmenu

config CPU_PXA168
	bool
	select CPU_MOHAWK
	help
	  Select code specific to PXA168

config CPU_PXA910
	bool
	select CPU_MOHAWK
	help
	  Select code specific to PXA910

config CPU_MMP2
	bool
	select CPU_PJ4
	help
	  Select code specific to MMP2. MMP2 is ARMv7 compatible.

config USB_EHCI_MV_U2O
        bool "EHCI support for PXA USB OTG controller"
	depends on USB_EHCI_MV
	help
	  Enables support for OTG controller which can be switched to host mode.

config MMP_SRAM
	bool

endif