1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
|
/*
* Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx53-tx53.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "Ka-Ro electronics TX53 module (LCD)";
compatible = "karo,tx53", "fsl,imx53";
aliases {
display = &display;
};
soc {
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb24_vga1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <®_3v3>;
brightness-levels = <
0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100
>;
default-brightness-level = <50>;
};
regulators {
reg_lcd_pwr: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_reset: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <®_2v5>;
VDDIO-supply = <®_3v3>;
clocks = <&mclk>;
};
polytouch: edt-ft5x06@38 {
compatible = "edt,edt-ft5x06";
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
interrupt-parent = <&gpio6>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
touchscreen: tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
interrupts = <26 0>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
linux,wakeup;
};
};
&iomuxc {
imx53-tx53-x03x {
pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
fsl,pins = <
MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */
MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
>;
};
pinctrl_rgb24_vga1: rgb24-vgagrp1 {
fsl,pins = <
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
>;
};
pinctrl_tsc2007: tsc2007grp {
fsl,pins = <
MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
>;
};
};
};
&ipu_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
/* sample keymap */
/* row/col 0,1 are mapped to KPP row/col 6,7 */
linux,keymap = <
MATRIX_KEY(6, 6, KEY_POWER)
MATRIX_KEY(6, 7, KEY_KP0)
MATRIX_KEY(6, 2, KEY_KP1)
MATRIX_KEY(6, 3, KEY_KP2)
MATRIX_KEY(7, 6, KEY_KP3)
MATRIX_KEY(7, 7, KEY_KP4)
MATRIX_KEY(7, 2, KEY_KP5)
MATRIX_KEY(7, 3, KEY_KP6)
MATRIX_KEY(2, 6, KEY_KP7)
MATRIX_KEY(2, 7, KEY_KP8)
MATRIX_KEY(2, 2, KEY_KP9)
>;
status = "okay";
};
|
