path: root/kernel/Documentation/cgroups/unified-hierarchy.txt

Cgroup unified hierarchy

April, 2014		Tejun Heo <tj@kernel.org>

This document describes the changes made by unified hierarchy and
their rationales.  It will eventually be merged into the main cgroup
documentation.

CONTENTS

1. Background
2. Basic Operation
  2-1. Mounting
  2-2. cgroup.subtree_control
  2-3. cgroup.controllers
3. Structural Constraints
  3-1. Top-down
  3-2. No internal tasks
4. Other Changes
  4-1. [Un]populated Notification
  4-2. Other Core Changes
  4-3. Per-Controller Changes
    4-3-1. blkio
    4-3-2. cpuset
    4-3-3. memory
5. Planned Changes
  5-1. CAP for resource control


1. Background

cgroup allows an arbitrary number of hierarchies and each hierarchy
can host any number of controllers.  While this seems to provide a
high level of flexibility, it isn't quite useful in practice.

For example, as there is only one instance of each controller, utility
type controllers such as freezer which can be useful in all
hierarchies can only be used in one.  The issue is exacerbated by the
fact that controllers can't be moved around once hierarchies are
populated.  Another issue is that all controllers bound to a hierarchy
are forced to have exactly the same view of the hierarchy.  It isn't
possible to vary the granularity depending on the specific controller.

In practice, these issues heavily limit which controllers can be put
on the same hierarchy and most configurations resort to putting each
controller on its own hierarchy.  Only closely related ones, such as
the cpu and cpuacct controllers, make sense to put on the same
hierarchy.  This often means that userland ends up managing multiple
similar hierarchies repeating the same steps on each hierarchy
whenever a hierarchy management operation is necessary.

Unfortunately, support for multiple hierarchies comes at a steep cost.
Internal implementation in cgroup core proper is dazzlingly
complicated but more importantly the support for multiple hierarchies
restricts how cgroup is used in general and what controllers can do.

There's no limit on how many hierarchies there may be, which means
that a task's cgroup membership can't be described in finite length.
The key may contain any varying number of entries and is unlimited in
length, which makes it highly awkward to handle and leads to addition
of controllers which exist only to identify membership, which in turn
exacerbates the original problem.

Also, as a controller can't have any expectation regarding what shape
of hierarchies other controllers would be on, each controller has to
assume that all other controllers are operating on completely
orthogonal hierarchies.  This makes it impossible, or at least very
cumbersome, for controllers to cooperate with each other.

In most use cases, putting controllers on hierarchies which are
completely orthogonal to each other isn't necessary.  What usually is
called for is the ability to have differing levels of granularity
depending on the specific controller.  In other words, hierarchy may
be collapsed from leaf towards root when viewed from specific
controllers.  For example, a given configuration might not care about
how memory is distributed beyond a certain level while still wanting
to control how CPU cycles are distributed.

Unified hierarchy is the next version of cgroup interface.  It aims to
address the aforementioned issues by having more structure while
retaining enough flexibility for most use cases.  Various other
general and controller-specific interface issues are also addressed in
the process.


2. Basic Operation

2-1. Mounting

Currently, unified hierarchy can be mounted with the following mount
command.  Note that this is still under development and scheduled to
change soon.

 mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT

All controllers which support the unified hierarchy and are not bound
to other hierarchies are automatically bound to unified hierarchy and
show up at the root of it.  Controllers which are enabled only in the
root of unified hierarchy can be bound to other hierarchies.  This
allows mixing unified hierarchy with the traditional multiple
hierarchies in a fully backward compatible way.

For development purposes, the following boot parameter makes all
controllers to appear on the unified hierarchy whether supported or
not.

 cgroup__DEVEL__legacy_files_on_dfl

A controller can be moved across hierarchies only after the controller
is no longer referenced in its current hierarchy.  Because per-cgroup
controller states are destroyed asynchronously and controllers may
have lingering references, a controller may not show up immediately on
the unified hierarchy after the final umount of the previous
hierarchy.  Similarly, a controller should be fully disabled to be
moved out of the unified hierarchy and it may take some time for the
disabled controller to become available for other hierarchies;
furthermore, due to dependencies among controllers, other controllers
may need to be disabled too.

While useful for development and manual configurations, dynamically
moving controllers between the unified and other hierarchies is
strongly discouraged for production use.  It is recommended to decide
the hierarchies and controller associations before starting using the
controllers.


2-2. cgroup.subtree_control

All cgroups on unified hierarchy have a "cgroup.subtree_control" file
which governs which controllers are enabled on the children of the
cgroup.  Let's assume a hierarchy like the following.

  root - A - B - C
               \ D

root's "cgroup.subtree_control" file determines which controllers are
enabled on A.  A's on B.  B's on C and D.  This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent.  In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in a "cgroup.subtree_control" file declares that
distribution of the respective resources of the cgroup will be
controlled.  Note that this means that controller enable states are
shared among siblings.

When read, the file contains a space-separated list of currently
enabled controllers.  A write to the file should contain a
space-separated list of controllers with '+' or '-' prefixed (without
the quotes).  Controllers prefixed with '+' are enabled and '-'
disabled.  If a controller is listed multiple times, the last entry
wins.  The specific operations are executed atomically - either all
succeed or fail.


2-3. cgroup.controllers

Read-only "cgroup.controllers" file contains a space-separated list of
controllers which can be enabled in the cgroup's
"cgroup.subtree_control" file.

In the root cgroup, this lists controllers which are not bound to
other hierarchies and the content changes as controllers are bound to
and unbound from other hierarchies.

In non-root cgroups, the content of this file equals that of the
parent's "cgroup.subtree_control" file as only controllers enabled
from the parent can be used in its children.


3. Structural Constraints

3-1. Top-down

As it doesn't make sense to nest control of an uncontrolled resource,
all non-root "cgroup.subtree_control" files can only contain
controllers which are enabled in the parent's "cgroup.subtree_control"
file.  A controller can be enabled only if the parent has the
controller enabled and a controller can't be disabled if one or more
children have it enabled.


3-2. No internal tasks

One long-standing issue that cgroup faces is the competition between
tasks belonging to the parent cgroup and its children cgroups.  This
is inherently nasty as two different types of entities compete and
there is no agreed-upon obvious way to handle it.  Different
controllers are doing different things.

The cpu controller considers tasks and cgroups as equivalents and maps
nice levels to cgroup weights.  This works for some cases but falls
flat when children should be allocated specific ratios of CPU cycles
and the number of internal tasks fluctuates - the ratios constantly
change as the number of competing entities fluctuates.  There also are
other issues.  The mapping from nice level to weight isn't obvious or
universal, and there are various other knobs which simply aren't
available for tasks.

The blkio controller implicitly creates a hidden leaf node for each
cgroup to host the tasks.  The hidden leaf has its own copies of all
the knobs with "leaf_" prefixed.  While this allows equivalent control
over internal tasks, it's with serious drawbacks.  It always adds an
extra layer of nesting which may not be necessary, makes the interface
messy and significantly complicates the implementation.

The memory controller currently doesn't have a way to control what
happens between internal tasks and child cgroups and the behavior is
not clearly defined.  There have been attempts to add ad-hoc behaviors
and knobs to tailor the behavior to specific workloads.  Continuing
this direction will lead to problems which will be extremely difficult
to resolve in the long term.

Multiple controllers struggle with internal tasks and came up with
different ways to deal with it; unfortunately, all the approaches in
use now are severely flawed and, furthermore, the widely different
behaviors make cgroup as whole highly inconsistent.

It is clear that this is something which needs to be addressed from
cgroup core proper in a uniform way so that controllers don't need to
worry about it and cgroup as a whole shows a consistent and logical
behavior.  To achieve that, unified hierarchy enforces the following
structural constraint:

 Except for the root, only cgroups which don't contain any task may
 have controllers enabled in their "cgroup.subtree_control" files.

Combined with other properties, this guarantees that, when a
controller is looking at the part of the hierarchy which has it
enabled, tasks are always only on the leaves.  This rules out
situations where child cgroups compete against internal tasks of the
parent.

There are two things to note.  Firstly, the root cgroup is exempt from
the restriction.  Root contains tasks and anonymous resource
consumption which can't be associated with any other cgroup and
requires special treatment from most controllers.  How resource
consumption in the root cgroup is governed is up to each controller.

Secondly, the restriction doesn't take effect if there is no enabled
controller in the cgroup's "cgroup.subtree_control" file.  This is
important as otherwise it wouldn't be possible to create children of a
populated cgroup.  To control resource distribution of a cgroup, the
cgroup must create children and transfer all its tasks to the children
before enabling controllers in its "cgroup.subtree_control" file.


4. Other Changes

4-1. [Un]populated Notification

cgroup users often need a way to determine when a cgroup's
subhierarchy becomes empty so that it can be cleaned up.  cgroup
currently provides release_agent for it; unfortunately, this mechanism
is riddled with issues.

- It delivers events by forking and execing a userland binary
  specified as the release_agent.  This is a long deprecated method of
  notification delivery.  It's extremely heavy, slow and cumbersome to
  integrate with larger infrastructure.

- There is single monitoring point at the root.  There's no way to
  delegate management of a subtree.

- The event isn't recursive.  It triggers when a cgroup doesn't have
  any tasks or child cgroups.  Events for internal nodes trigger only
  after all children are removed.  This again makes it impossible to
  delegate management of a subtree.

- Events are filtered from the kernel side.  A "notify_on_release"
  file is used to subscribe to or suppress release events.  This is
  unnecessarily complicated and probably done this way because event
  delivery itself was expensive.

Unified hierarchy implements an interface file "cgroup.populated"
which can be used to monitor whether the cgroup's subhierarchy has
tasks in it or not.  Its value is 0 if there is no task in the cgroup
and its descendants; otherwise, 1.  poll and [id]notify events are
triggered when the value changes.

This is significantly lighter and simpler and trivially allows
delegating management of subhierarchy - subhierarchy monitoring can
block further propagation simply by putting itself or another process
in the subhierarchy and monitor events that it's interested in from
there without interfering with monitoring higher in the tree.

In unified hierarchy, the release_agent mechanism is no longer
supported and the interface files "release_agent" and
"notify_on_release" do not exist.


4-2. Other Core Changes

- None of the mount options is allowed.

- remount is disallowed.

- rename(2) is disallowed.

- The "tasks" file is removed.  Everything should at process
  granularity.  Use the "cgroup.procs" file instead.

- The "cgroup.procs" file is not sorted.  pids will be unique unless
  they got recycled in-between reads.

- The "cgroup.clone_children" file is removed.


4-3. Per-Controller Changes

4-3-1. blkio

- blk-throttle becomes properly hierarchical.


4-3-2. cpuset

- Tasks are kept in empty cpusets after hotplug and take on the masks
  of the nearest non-empty ancestor, instead of being moved to it.

- A task can be moved into an empty cpuset, and again it takes on the
  masks of the nearest non-empty ancestor.


4-3-3. memory

- use_hierarchy is on by default and the cgroup file for the flag is
  not created.

- The original lower boundary, the soft limit, is defined as a limit
  that is per default unset.  As a result, the set of cgroups that
  global reclaim prefers is opt-in, rather than opt-out.  The costs
  for optimizing these mostly negative lookups are so high that the
  implementation, despite its enormous size, does not even provide the
  basic desirable behavior.  First off, the soft limit has no
  hierarchical meaning.  All configured groups are organized in a
  global rbtree and treated like equal peers, regardless where they
  are located in the hierarchy.  This makes subtree delegation
  impossible.  Second, the soft limit reclaim pass is so aggressive
  that it not just introduces high allocation latencies into the
  system, but also impacts system performance due to overreclaim, to
  the point where the feature becomes self-defeating.

  The memory.low boundary on the other hand is a top-down allocated
  reserve.  A cgroup enjoys reclaim protection when it and all its
  ancestors are below their low boundaries, which makes delegation of
  subtrees possible.  Secondly, new cgroups have no reserve per
  default and in the common case most cgroups are eligible for the
  preferred reclaim pass.  This allows the new low boundary to be
  efficiently implemented with just a minor addition to the generic
  reclaim code, without the need for out-of-band data structures and
  reclaim passes.  Because the generic reclaim code considers all
  cgroups except for the ones running low in the preferred first
  reclaim pass, overreclaim of individual groups is eliminated as
  well, resulting in much better overall workload performance.

- The original high boundary, the hard limit, is defined as a strict
  limit that can not budge, even if the OOM killer has to be called.
  But this generally goes against the goal of making the most out of
  the available memory.  The memory consumption of workloads varies
  during runtime, and that requires users to overcommit.  But doing
  that with a strict upper limit requires either a fairly accurate
  prediction of the working set size or adding slack to the limit.
  Since working set size estimation is hard and error prone, and
  getting it wrong results in OOM kills, most users tend to err on the
  side of a looser limit and end up wasting precious resources.

  The memory.high boundary on the other hand can be set much more
  conservatively.  When hit, it throttles allocations by forcing them
  into direct reclaim to work off the excess, but it never invokes the
  OOM killer.  As a result, a high boundary that is chosen too
  aggressively will not terminate the processes, but instead it will
  lead to gradual performance degradation.  The user can monitor this
  and make corrections until the minimal memory footprint that still
  gives acceptable performance is found.

  In extreme cases, with many concurrent allocations and a complete
  breakdown of reclaim progress within the group, the high boundary
  can be exceeded.  But even then it's mostly better to satisfy the
  allocation from the slack available in other groups or the rest of
  the system than killing the group.  Otherwise, memory.max is there
  to limit this type of spillover and ultimately contain buggy or even
  malicious applications.

- The original control file names are unwieldy and inconsistent in
  many different ways.  For example, the upper boundary hit count is
  exported in the memory.failcnt file, but an OOM event count has to
  be manually counted by listening to memory.oom_control events, and
  lower boundary / soft limit events have to be counted by first
  setting a threshold for that value and then counting those events.
  Also, usage and limit files encode their units in the filename.
  That makes the filenames very long, even though this is not
  information that a user needs to be reminded of every time they type
  out those names.

  To address these naming issues, as well as to signal clearly that
  the new interface carries a new configuration model, the naming
  conventions in it necessarily differ from the old interface.

- The original limit files indicate the state of an unset limit with a
  Very High Number, and a configured limit can be unset by echoing -1
  into those files.  But that very high number is implementation and
  architecture dependent and not very descriptive.  And while -1 can
  be understood as an underflow into the highest possible value, -2 or
  -10M etc. do not work, so it's not consistent.

  memory.low, memory.high, and memory.max will use the string "max" to
  indicate and set the highest possible value.

5. Planned Changes

5-1. CAP for resource control

Unified hierarchy will require one of the capabilities(7), which is
yet to be decided, for all resource control related knobs.  Process
organization operations - creation of sub-cgroups and migration of
processes in sub-hierarchies may be delegated by changing the
ownership and/or permissions on the cgroup directory and
"cgroup.procs" interface file; however, all operations which affect
resource control - writes to a "cgroup.subtree_control" file or any
controller-specific knobs - will require an explicit CAP privilege.

This, in part, is to prevent the cgroup interface from being
inadvertently promoted to programmable API used by non-privileged
binaries.  cgroup exposes various aspects of the system in ways which
aren't properly abstracted for direct consumption by regular programs.
This is an administration interface much closer to sysctl knobs than
system calls.  Even the basic access model, being filesystem path
based, isn't suitable for direct consumption.  There's no way to
access "my cgroup" in a race-free way or make multiple operations
atomic against migration to another cgroup.

Another aspect is that, for better or for worse, the cgroup interface
goes through far less scrutiny than regular interfaces for
unprivileged userland.  The upside is that cgroup is able to expose
useful features which may not be suitable for general consumption in a
reasonable time frame.  It provides a relatively short path between
internal details and userland-visible interface.  Of course, this
shortcut comes with high risk.  We go through what we go through for
general kernel APIs for good reasons.  It may end up leaking internal
details in a way which can exert significant pain by locking the
kernel into a contract that can't be maintained in a reasonable
manner.

Also, due to the specific nature, cgroup and its controllers don't
tend to attract attention from a wide scope of developers.  cgroup's
short history is already fraught with severely mis-designed
interfaces, unnecessary commitments to and exposing of internal
details, broken and dangerous implementations of various features.

Keeping cgroup as an administration interface is both advantageous for
its role and imperative given its nature.  Some of the cgroup features
may make sense for unprivileged access.  If deemed justified, those
must be further abstracted and implemented as a different interface,
be it a system call or process-private filesystem, and survive through
the scrutiny that any interface for general consumption is required to
go through.

Requiring CAP is not a complete solution but should serve as a
significant deterrent against spraying cgroup usages in non-privileged
programs.