diff options
Diffstat (limited to 'qemu/tests/qemu-iotests/051')
| -rwxr-xr-x | qemu/tests/qemu-iotests/051 | 334 |
1 files changed, 0 insertions, 334 deletions
diff --git a/qemu/tests/qemu-iotests/051 b/qemu/tests/qemu-iotests/051 deleted file mode 100755 index 630cb7a11..000000000 --- a/qemu/tests/qemu-iotests/051 +++ /dev/null @@ -1,334 +0,0 @@ -#!/bin/bash -# -# Test command line configuration of block devices and driver-specific options -# -# Copyright (C) 2013 Red Hat, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# - -# creator -owner=kwolf@redhat.com - -seq=`basename $0` -echo "QA output created by $seq" - -here=`pwd` -status=1 # failure is the default! - -_cleanup() -{ - _cleanup_test_img -} -trap "_cleanup; exit \$status" 0 1 2 3 15 - -# get standard environment, filters and checks -. ./common.rc -. ./common.filter - -_supported_fmt qcow2 -_supported_proto file -_supported_os Linux -# A compat=0.10 image is created in this test which does not support anything -# other than refcount_bits=16 -_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)' - -function do_run_qemu() -{ - echo Testing: "$@" - ( - if ! test -t 0; then - while read cmd; do - echo $cmd - done - fi - echo quit - ) | $QEMU -nographic -monitor stdio -serial none "$@" - echo -} - -function run_qemu() -{ - do_run_qemu "$@" 2>&1 | _filter_testdir | _filter_qemu | _filter_generated_node_ids -} - -size=128M -device_id="drive0" - -_make_test_img $size -cp "$TEST_IMG" "$TEST_IMG.orig" -mv "$TEST_IMG" "$TEST_IMG.base" -_make_test_img -b "$TEST_IMG.base" $size - -echo -echo === Unknown option === -echo - -run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=,if=none,id=$device_id -run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=on,if=none,id=$device_id -run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=1234,if=none,id=$device_id -run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=foo,if=none,id=$device_id - -echo -echo === Unknown protocol option === -echo - -run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt= -run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=on -run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=1234 -run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=foo - -echo -echo === Invalid format === -echo - -run_qemu -drive file="$TEST_IMG",format=foo -run_qemu -drive file="$TEST_IMG",driver=foo -run_qemu -drive file="$TEST_IMG",driver=raw,format=qcow2 -run_qemu -drive file="$TEST_IMG",driver=qcow2,format=qcow2 - -echo -echo === Device without drive === -echo - -run_qemu -device virtio-scsi-pci -device scsi-hd - -echo -echo === Overriding backing file === -echo - -echo "info block" | run_qemu -drive file="$TEST_IMG",driver=qcow2,backing.file.filename="$TEST_IMG.orig",if=none,id=$device_id -nodefaults\ - | _filter_generated_node_ids - -# Drivers that don't support backing files -run_qemu -drive file="$TEST_IMG",driver=raw,backing.file.filename="$TEST_IMG.orig" -run_qemu -drive file="$TEST_IMG",file.backing.driver=file,file.backing.filename="$TEST_IMG.orig" -run_qemu -drive file="$TEST_IMG",file.backing.driver=qcow2,file.backing.file.filename="$TEST_IMG.orig" - -echo -echo === Enable and disable lazy refcounting on the command line, plus some invalid values === -echo - -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts= -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=42 -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=foo - - -echo -echo === With version 2 images enabling lazy refcounts must fail === -echo - -_make_test_img -ocompat=0.10 $size - -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on -run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off - -echo -echo === No medium === -echo - -case "$QEMU_DEFAULT_MACHINE" in - pc) - run_qemu -drive if=floppy - run_qemu -drive if=ide,media=cdrom - run_qemu -drive if=scsi,media=cdrom - run_qemu -drive if=ide - run_qemu -drive if=scsi - ;; - *) - ;; -esac - -run_qemu -drive if=virtio - -case "$QEMU_DEFAULT_MACHINE" in - pc) - run_qemu -drive if=none,id=disk -device ide-cd,drive=disk - run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk - run_qemu -drive if=none,id=disk -device ide-drive,drive=disk - run_qemu -drive if=none,id=disk -device ide-hd,drive=disk - run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk - run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk - ;; - *) - ;; -esac - -echo -echo === Read-only === -echo - -case "$QEMU_DEFAULT_MACHINE" in - pc) - run_qemu -drive file="$TEST_IMG",if=floppy,readonly=on - run_qemu -drive file="$TEST_IMG",if=ide,media=cdrom,readonly=on - run_qemu -drive file="$TEST_IMG",if=scsi,media=cdrom,readonly=on - run_qemu -drive file="$TEST_IMG",if=ide,readonly=on - run_qemu -drive file="$TEST_IMG",if=scsi,readonly=on - ;; - *) - ;; -esac - -run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on - -case "$QEMU_DEFAULT_MACHINE" in - pc) - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-cd,drive=disk - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-drive,drive=disk - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-hd,drive=disk - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk - run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk - ;; - *) - ;; -esac - -echo -echo === Cache modes === -echo - -# Cannot use the test image because cache=none might not work on the host FS -# Use cdrom so that we won't get errors about missing media - -run_qemu -drive driver=null-co,cache=none -run_qemu -drive driver=null-co,cache=directsync -run_qemu -drive driver=null-co,cache=writeback -run_qemu -drive driver=null-co,cache=writethrough -run_qemu -drive driver=null-co,cache=unsafe -run_qemu -drive driver=null-co,cache=invalid_value - -# Can't test direct=on here because O_DIRECT might not be supported on this FS -# Test 142 checks the direct=on cases - -for cache in writeback writethrough unsafe invalid_value; do - echo -e "info block\ninfo block file\ninfo block backing\ninfo block backing-file" | \ - run_qemu -drive file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=$device_id -nodefaults -done - -echo -echo === Specifying the protocol layer === -echo - -run_qemu -drive file="$TEST_IMG",file.driver=file - -echo -echo === Leaving out required options === -echo - -run_qemu -drive driver=file -run_qemu -drive driver=nbd -run_qemu -drive driver=raw -run_qemu -drive file.driver=file -run_qemu -drive file.driver=nbd -run_qemu -drive file.driver=raw -run_qemu -drive foo=bar - -echo -echo === Specifying both an option and its legacy alias === -echo - -run_qemu -drive file="$TEST_IMG",iops=1234,throttling.iops-total=5678 -run_qemu -drive file="$TEST_IMG",iops_rd=1234,throttling.iops-read=5678 -run_qemu -drive file="$TEST_IMG",iops_wr=1234,throttling.iops-write=5678 - -run_qemu -drive file="$TEST_IMG",bps=1234,throttling.bps-total=5678 -run_qemu -drive file="$TEST_IMG",bps_rd=1234,throttling.bps-read=5678 -run_qemu -drive file="$TEST_IMG",bps_wr=1234,throttling.bps-write=5678 - -run_qemu -drive file="$TEST_IMG",iops_max=1234,throttling.iops-total-max=5678 -run_qemu -drive file="$TEST_IMG",iops_rd_max=1234,throttling.iops-read-max=5678 -run_qemu -drive file="$TEST_IMG",iops_wr_max=1234,throttling.iops-write-max=5678 - -run_qemu -drive file="$TEST_IMG",bps_max=1234,throttling.bps-total-max=5678 -run_qemu -drive file="$TEST_IMG",bps_rd_max=1234,throttling.bps-read-max=5678 -run_qemu -drive file="$TEST_IMG",bps_wr_max=1234,throttling.bps-write-max=5678 - -run_qemu -drive file="$TEST_IMG",iops_size=1234,throttling.iops-size=5678 -run_qemu -drive file="$TEST_IMG",readonly=on,read-only=off - -echo -echo === Catching negative/large throttling values === -echo - -run_qemu -drive file="$TEST_IMG",iops=-1 -run_qemu -drive file="$TEST_IMG",bps=-2 -run_qemu -drive file="$TEST_IMG",bps_rd=-3 -run_qemu -drive file="$TEST_IMG",bps_rd_max=-3 -run_qemu -drive file="$TEST_IMG",throttling.iops-total=-4 -run_qemu -drive file="$TEST_IMG",throttling.bps-total=-5 -# These are accepted -run_qemu -drive file="$TEST_IMG",bps=0 -run_qemu -drive file="$TEST_IMG",bps=1 -run_qemu -drive file="$TEST_IMG",bps=1000000000000000 -# While these are not -run_qemu -drive file="$TEST_IMG",bps=1000000000000001 -run_qemu -drive file="$TEST_IMG",bps=9999999999999999 - -echo -echo === Parsing protocol from file name === -echo - -# Protocol strings are supposed to be parsed from traditional option strings, -# but not when using driver-specific options. We can distinguish them by the -# error message for non-existing files. - -run_qemu -hda foo:bar -run_qemu -drive file=foo:bar -run_qemu -drive file.filename=foo:bar - -run_qemu -hda "file:$TEST_IMG" -run_qemu -drive file="file:$TEST_IMG" -run_qemu -drive file.filename="file:$TEST_IMG" - -echo -echo === Snapshot mode === -echo - -$QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io - - -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on,if=none,id=$device_id\ - | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,if=none,id=$device_id -snapshot\ - | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io - -# Opening a read-only file r/w with snapshot=on -chmod u-w "$TEST_IMG" -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io -chmod u+w "$TEST_IMG" - -$QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io - -echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=off,if=none,id=$device_id | _filter_qemu_io - -$QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io - -echo -e "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id\ - | _filter_qemu_io - -$QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io - -# success, all done -echo "*** done" -rm -f $seq.full -status=0 |