diff options
Diffstat (limited to 'qemu/roms/u-boot/include/netdev.h')
| -rw-r--r-- | qemu/roms/u-boot/include/netdev.h | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/qemu/roms/u-boot/include/netdev.h b/qemu/roms/u-boot/include/netdev.h deleted file mode 100644 index e211f1841..000000000 --- a/qemu/roms/u-boot/include/netdev.h +++ /dev/null @@ -1,217 +0,0 @@ -/* - * (C) Copyright 2008 - * Benjamin Warren, biggerbadderben@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * netdev.h - definitions an prototypes for network devices - */ - -#ifndef _NETDEV_H_ -#define _NETDEV_H_ - -/* - * Board and CPU-specific initialization functions - * board_eth_init() has highest priority. cpu_eth_init() only - * gets called if board_eth_init() isn't instantiated or fails. - * Return values: - * 0: success - * -1: failure - */ - -int board_eth_init(bd_t *bis); -int cpu_eth_init(bd_t *bis); - -/* Driver initialization prototypes */ -int altera_tse_initialize(u8 dev_num, int mac_base, - int sgdma_rx_base, int sgdma_tx_base, - u32 sgdma_desc_base, u32 sgdma_desc_size); -int at91emac_register(bd_t *bis, unsigned long iobase); -int au1x00_enet_initialize(bd_t*); -int ax88180_initialize(bd_t *bis); -int bfin_EMAC_initialize(bd_t *bis); -int calxedaxgmac_initialize(u32 id, ulong base_addr); -int cs8900_initialize(u8 dev_num, int base_addr); -int davinci_emac_initialize(void); -int dc21x4x_initialize(bd_t *bis); -int designware_initialize(ulong base_addr, u32 interface); -int dm9000_initialize(bd_t *bis); -int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); -int e1000_initialize(bd_t *bis); -int eepro100_initialize(bd_t *bis); -int enc28j60_initialize(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); -int ep93xx_eth_initialize(u8 dev_num, int base_addr); -int eth_3com_initialize (bd_t * bis); -int ethoc_initialize(u8 dev_num, int base_addr); -int fec_initialize (bd_t *bis); -int fecmxc_initialize(bd_t *bis); -int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr); -int ftgmac100_initialize(bd_t *bits); -int ftmac100_initialize(bd_t *bits); -int ftmac110_initialize(bd_t *bits); -int greth_initialize(bd_t *bis); -void gt6426x_eth_initialize(bd_t *bis); -int ks8695_eth_initialize(void); -int ks8851_mll_initialize(u8 dev_num, int base_addr); -int lan91c96_initialize(u8 dev_num, int base_addr); -int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); -int mcdmafec_initialize(bd_t *bis); -int mcffec_initialize(bd_t *bis); -int mpc512x_fec_initialize(bd_t *bis); -int mpc5xxx_fec_initialize(bd_t *bis); -int mpc82xx_scc_enet_initialize(bd_t *bis); -int mvgbe_initialize(bd_t *bis); -int natsemi_initialize(bd_t *bis); -int ne2k_register(void); -int npe_initialize(bd_t *bis); -int ns8382x_initialize(bd_t *bis); -int pcnet_initialize(bd_t *bis); -int plb2800_eth_initialize(bd_t *bis); -int ppc_4xx_eth_initialize (bd_t *bis); -int rtl8139_initialize(bd_t *bis); -int rtl8169_initialize(bd_t *bis); -int scc_initialize(bd_t *bis); -int sh_eth_initialize(bd_t *bis); -int skge_initialize(bd_t *bis); -int smc91111_initialize(u8 dev_num, int base_addr); -int smc911x_initialize(u8 dev_num, int base_addr); -int sunxi_wemac_initialize(bd_t *bis); -int tsi108_eth_initialize(bd_t *bis); -int uec_standard_init(bd_t *bis); -int uli526x_initialize(bd_t *bis); -int armada100_fec_register(unsigned long base_addr); -int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr, - unsigned long dma_addr); -int xilinx_emaclite_of_init(const void *blob); -int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, - int txpp, int rxpp); -int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, - unsigned long ctrl_addr); -int zynq_gem_of_init(const void *blob); -int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); -/* - * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface - * exported by a public hader file, we need a global definition at this point. - */ -#if defined(CONFIG_XILINX_LL_TEMAC) -#define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */ -#define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */ -#define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */ -#endif - -/* Boards with PCI network controllers can call this from their board_eth_init() - * function to initialize whatever's on board. - * Return value is total # of devices found */ - -static inline int pci_eth_init(bd_t *bis) -{ - int num = 0; - -#ifdef CONFIG_PCI - -#ifdef CONFIG_EEPRO100 - num += eepro100_initialize(bis); -#endif -#ifdef CONFIG_TULIP - num += dc21x4x_initialize(bis); -#endif -#ifdef CONFIG_E1000 - num += e1000_initialize(bis); -#endif -#ifdef CONFIG_PCNET - num += pcnet_initialize(bis); -#endif -#ifdef CONFIG_NATSEMI - num += natsemi_initialize(bis); -#endif -#ifdef CONFIG_NS8382X - num += ns8382x_initialize(bis); -#endif -#if defined(CONFIG_RTL8139) - num += rtl8139_initialize(bis); -#endif -#if defined(CONFIG_RTL8169) - num += rtl8169_initialize(bis); -#endif -#if defined(CONFIG_ULI526X) - num += uli526x_initialize(bis); -#endif - -#endif /* CONFIG_PCI */ - return num; -} - -/* - * Boards with mv88e61xx switch can use this by defining - * CONFIG_MV88E61XX_SWITCH in respective board configheader file - * the stuct and enums here are used to specify switch configuration params - */ -#if defined(CONFIG_MV88E61XX_SWITCH) - -/* constants for any 88E61xx switch */ -#define MV88E61XX_MAX_PORTS_NUM 6 - -enum mv88e61xx_cfg_mdip { - MV88E61XX_MDIP_NOCHANGE, - MV88E61XX_MDIP_REVERSE -}; - -enum mv88e61xx_cfg_ledinit { - MV88E61XX_LED_INIT_DIS, - MV88E61XX_LED_INIT_EN -}; - -enum mv88e61xx_cfg_rgmiid { - MV88E61XX_RGMII_DELAY_DIS, - MV88E61XX_RGMII_DELAY_EN -}; - -enum mv88e61xx_cfg_prtstt { - MV88E61XX_PORTSTT_DISABLED, - MV88E61XX_PORTSTT_BLOCKING, - MV88E61XX_PORTSTT_LEARNING, - MV88E61XX_PORTSTT_FORWARDING -}; - -struct mv88e61xx_config { - char *name; - u8 vlancfg[MV88E61XX_MAX_PORTS_NUM]; - enum mv88e61xx_cfg_rgmiid rgmii_delay; - enum mv88e61xx_cfg_prtstt portstate; - enum mv88e61xx_cfg_ledinit led_init; - enum mv88e61xx_cfg_mdip mdip; - u32 ports_enabled; - u8 cpuport; -}; - -/* - * Common mappings for Internal VLANs - * These mappings consider that all ports are useable; the driver - * will mask inexistent/unused ports. - */ - -/* Switch mode : routes any port to any port */ -#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F } - -/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */ -#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F } - -int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); -#endif /* CONFIG_MV88E61XX_SWITCH */ - -struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id); -#ifdef CONFIG_PHYLIB -struct phy_device; -int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr, - struct mii_dev *bus, struct phy_device *phydev); -#else -/* - * Allow FEC to fine-tune MII configuration on boards which require this. - */ -int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int)); -#endif - -#endif /* _NETDEV_H_ */ |