diff options
Diffstat (limited to 'qemu/roms/u-boot/include/mvmfp.h')
| -rw-r--r-- | qemu/roms/u-boot/include/mvmfp.h | 84 |
1 files changed, 0 insertions, 84 deletions
diff --git a/qemu/roms/u-boot/include/mvmfp.h b/qemu/roms/u-boot/include/mvmfp.h deleted file mode 100644 index 961d79995..000000000 --- a/qemu/roms/u-boot/include/mvmfp.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MVMFP_H -#define __MVMFP_H - -/* - * Header file for MultiFunctionPin (MFP) Configururation framework - * - * Processors Supported: - * 1. Marvell ARMADA100 Processors - * - * processor to be supported should be added here - */ - -/* - * MFP configuration is represented by a 32-bit unsigned integer - */ -#define MFP(_off, _pull, _pF, _drv, _dF, _edge, _eF, _afn, _aF) ( \ - /* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \ - /* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \ - /* bit 12 - Unused */ \ - /* bits 11..10 - Driver Strength */ (((_drv) & 0x3) << 10) | \ - /* bit 09 - Pull State flag */ (((_pF) & 0x1) << 9) | \ - /* bit 08 - Drv-strength flag */ (((_dF) & 0x1) << 8) | \ - /* bit 07 - Edge-det flag */ (((_eF) & 0x1) << 7) | \ - /* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \ - /* bits 03..00 - Alt-fun flag */ (((_aF) & 0x1) << 3) | \ - /* bits Alternate-fun select */ ((_afn) & 0x7)) - -/* - * to facilitate the definition, the following macros are provided - * - * offset, pull,pF, drv,dF, edge,eF ,afn,aF - */ -#define MFP_OFFSET_MASK MFP(0xffff, 0,0, 0,0, 0,0, 0,0) -#define MFP_REG(x) MFP(x, 0,0, 0,0, 0,0, 0,0) -#define MFP_REG_GET_OFFSET(x) ((x & MFP_OFFSET_MASK) >> 16) - -#define MFP_AF_FLAG MFP(0x0000, 0,0, 0,0, 0,0, 0,1) -#define MFP_DRIVE_FLAG MFP(0x0000, 0,0, 0,1, 0,0, 0,0) -#define MFP_EDGE_FLAG MFP(0x0000, 0,0, 0,0, 0,1, 0,0) -#define MFP_PULL_FLAG MFP(0x0000, 0,1, 0,0, 0,0, 0,0) - -#define MFP_AF0 MFP(0x0000, 0,0, 0,0, 0,0, 0,1) -#define MFP_AF1 MFP(0x0000, 0,0, 0,0, 0,0, 1,1) -#define MFP_AF2 MFP(0x0000, 0,0, 0,0, 0,0, 2,1) -#define MFP_AF3 MFP(0x0000, 0,0, 0,0, 0,0, 3,1) -#define MFP_AF4 MFP(0x0000, 0,0, 0,0, 0,0, 4,1) -#define MFP_AF5 MFP(0x0000, 0,0, 0,0, 0,0, 5,1) -#define MFP_AF6 MFP(0x0000, 0,0, 0,0, 0,0, 6,1) -#define MFP_AF7 MFP(0x0000, 0,0, 0,0, 0,0, 7,1) -#define MFP_AF_MASK MFP(0x0000, 0,0, 0,0, 0,0, 7,0) - -#define MFP_LPM_EDGE_NONE MFP(0x0000, 0,0, 0,0, 0,1, 0,0) -#define MFP_LPM_EDGE_RISE MFP(0x0000, 0,0, 0,0, 1,1, 0,0) -#define MFP_LPM_EDGE_FALL MFP(0x0000, 0,0, 0,0, 2,1, 0,0) -#define MFP_LPM_EDGE_BOTH MFP(0x0000, 0,0, 0,0, 3,1, 0,0) -#define MFP_LPM_EDGE_MASK MFP(0x0000, 0,0, 0,0, 3,0, 0,0) - -#define MFP_DRIVE_VERY_SLOW MFP(0x0000, 0,0, 0,1, 0,0, 0,0) -#define MFP_DRIVE_SLOW MFP(0x0000, 0,0, 1,1, 0,0, 0,0) -#define MFP_DRIVE_MEDIUM MFP(0x0000, 0,0, 2,1, 0,0, 0,0) -#define MFP_DRIVE_FAST MFP(0x0000, 0,0, 3,1, 0,0, 0,0) -#define MFP_DRIVE_MASK MFP(0x0000, 0,0, 3,0, 0,0, 0,0) - -#define MFP_PULL_NONE MFP(0x0000, 0,1, 0,0, 0,0, 0,0) -#define MFP_PULL_LOW MFP(0x0000, 1,1, 0,0, 0,0, 0,0) -#define MFP_PULL_HIGH MFP(0x0000, 2,1, 0,0, 0,0, 0,0) -#define MFP_PULL_BOTH MFP(0x0000, 3,1, 0,0, 0,0, 0,0) -#define MFP_PULL_FLOAT MFP(0x0000, 4,1, 0,0, 0,0, 0,0) -#define MFP_PULL_MASK MFP(0x0000, 7,0, 0,0, 0,0, 0,0) - -#define MFP_EOC 0xffffffff /* indicates end-of-conf */ - -/* Functions */ -void mfp_config(u32 *mfp_cfgs); - -#endif /* __MVMFP_H */ |