diff options
Diffstat (limited to 'qemu/roms/u-boot/include/mtd/mtd-abi.h')
| -rw-r--r-- | qemu/roms/u-boot/include/mtd/mtd-abi.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/mtd/mtd-abi.h b/qemu/roms/u-boot/include/mtd/mtd-abi.h new file mode 100644 index 000000000..ac3c29876 --- /dev/null +++ b/qemu/roms/u-boot/include/mtd/mtd-abi.h @@ -0,0 +1,197 @@ +/* + * $Id: mtd-abi.h,v 1.13 2005/11/07 11:14:56 gleixner Exp $ + * + * Portions of MTD ABI definition which are shared by kernel and user space + */ + +#ifndef __MTD_ABI_H__ +#define __MTD_ABI_H__ + +#if 1 +#include <linux/compat.h> +#endif + +#include <linux/compiler.h> + +struct erase_info_user { + uint32_t start; + uint32_t length; +}; + +struct mtd_oob_buf { + uint32_t start; + uint32_t length; + unsigned char __user *ptr; +}; + +/* + * MTD operation modes + * + * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) + * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas + * which are defined by the internal ecclayout + * @MTD_OPS_RAW: data are transferred as-is, with no error correction; + * this mode implies %MTD_OPS_PLACE_OOB + * + * These modes can be passed to ioctl(MEMWRITE) and are also used internally. + * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. + * %MTD_FILE_MODE_RAW. + */ +enum { + MTD_OPS_PLACE_OOB = 0, + MTD_OPS_AUTO_OOB = 1, + MTD_OPS_RAW = 2, +}; + +#define MTD_ABSENT 0 +#define MTD_RAM 1 +#define MTD_ROM 2 +#define MTD_NORFLASH 3 +#define MTD_NANDFLASH 4 +#define MTD_DATAFLASH 6 +#define MTD_UBIVOLUME 7 + +#define MTD_WRITEABLE 0x400 /* Device is writeable */ +#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ +#define MTD_NO_ERASE 0x1000 /* No erase necessary */ +#define MTD_STUPID_LOCK 0x2000 /* Always locked after reset */ + +/* Some common devices / combinations of capabilities */ +#define MTD_CAP_ROM 0 +#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) +#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE) +#define MTD_CAP_NANDFLASH (MTD_WRITEABLE) + +/* ECC byte placement */ +#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */ +#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */ +#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */ +#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */ +#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */ + +/* OTP mode selection */ +#define MTD_OTP_OFF 0 +#define MTD_OTP_FACTORY 1 +#define MTD_OTP_USER 2 + +struct mtd_info_user { + uint8_t type; + uint32_t flags; + uint32_t size; /* Total size of the MTD */ + uint32_t erasesize; + uint32_t writesize; + uint32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ + /* The below two fields are obsolete and broken, do not use them + * (TODO: remove at some point) */ + uint32_t ecctype; + uint32_t eccsize; +}; + +struct region_info_user { + uint32_t offset; /* At which this region starts, + * from the beginning of the MTD */ + uint32_t erasesize; /* For this region */ + uint32_t numblocks; /* Number of blocks in this region */ + uint32_t regionindex; +}; + +struct otp_info { + uint32_t start; + uint32_t length; + uint32_t locked; +}; + +/* Get basic MTD characteristics info (better to use sysfs) */ +#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +/* Erase segment of MTD */ +#define MEMERASE _IOW('M', 2, struct erase_info_user) +/* Write out-of-band data from MTD */ +#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +/* Read out-of-band data from MTD */ +#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +/* Lock a chip (for MTD that supports it) */ +#define MEMLOCK _IOW('M', 5, struct erase_info_user) +/* Unlock a chip (for MTD that supports it) */ +#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +/* Get the number of different erase regions */ +#define MEMGETREGIONCOUNT _IOR('M', 7, int) +/* Get information about the erase region for a specific index */ +#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ +#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) +#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +/* Check if an eraseblock is bad */ +#define MEMGETBADBLOCK _IOW('M', 11, loff_t) +/* Mark an eraseblock as bad */ +#define MEMSETBADBLOCK _IOW('M', 12, loff_t) +/* Set OTP (One-Time Programmable) mode (factory vs. user) */ +#define OTPSELECT _IOR('M', 13, int) +/* Get number of OTP (One-Time Programmable) regions */ +#define OTPGETREGIONCOUNT _IOW('M', 14, int) +/* Get all OTP (One-Time Programmable) info about MTD */ +#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) +/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ +#define OTPLOCK _IOR('M', 16, struct otp_info) +/* Get ECC layout (deprecated) */ +#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout) +/* Get statistics about corrected/uncorrected errors */ +#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) +/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ +#define MTDFILEMODE _IO('M', 19) + +/* + * Obsolete legacy interface. Keep it in order not to break userspace + * interfaces + */ +struct nand_oobinfo { + uint32_t useecc; + uint32_t eccbytes; + uint32_t oobfree[8][2]; + uint32_t eccpos[48]; +}; + +struct nand_oobfree { + uint32_t offset; + uint32_t length; +}; + +/** + * struct mtd_ecc_stats - error correction stats + * + * @corrected: number of corrected bits + * @failed: number of uncorrectable errors + * @badblocks: number of bad blocks in this partition + * @bbtblocks: number of blocks reserved for bad block tables + */ +struct mtd_ecc_stats { + uint32_t corrected; + uint32_t failed; + uint32_t badblocks; + uint32_t bbtblocks; +}; + +/* + * MTD file modes - for read/write access to MTD + * + * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled + * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode + * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode + * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled + * + * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained + * separately for each open file descriptor. + * + * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - + * raw access to the flash, without error correction or autoplacement schemes. + * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode + * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is + * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). + */ +enum mtd_file_modes { + MTD_MODE_NORMAL = MTD_OTP_OFF, + MTD_MODE_OTP_FACTORY = MTD_OTP_FACTORY, + MTD_MODE_OTP_USER = MTD_OTP_USER, + MTD_MODE_RAW, +}; + +#endif /* __MTD_ABI_H__ */ |