diff options
Diffstat (limited to 'qemu/roms/u-boot/include/mmc.h')
| -rw-r--r-- | qemu/roms/u-boot/include/mmc.h | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/mmc.h b/qemu/roms/u-boot/include/mmc.h new file mode 100644 index 000000000..bc11f45a6 --- /dev/null +++ b/qemu/roms/u-boot/include/mmc.h @@ -0,0 +1,383 @@ +/* + * Copyright 2008,2010 Freescale Semiconductor, Inc + * Andy Fleming + * + * Based (loosely) on the Linux code + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MMC_H_ +#define _MMC_H_ + +#include <linux/list.h> +#include <linux/compiler.h> +#include <part.h> + +#define SD_VERSION_SD 0x20000 +#define SD_VERSION_3 (SD_VERSION_SD | 0x300) +#define SD_VERSION_2 (SD_VERSION_SD | 0x200) +#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100) +#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a) +#define MMC_VERSION_MMC 0x10000 +#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC) +#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102) +#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104) +#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202) +#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300) +#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400) +#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401) +#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402) +#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403) +#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429) +#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405) + +#define MMC_MODE_HS 0x001 +#define MMC_MODE_HS_52MHz 0x010 +#define MMC_MODE_4BIT 0x100 +#define MMC_MODE_8BIT 0x200 +#define MMC_MODE_SPI 0x400 +#define MMC_MODE_HC 0x800 + +#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) +#define MMC_MODE_WIDTH_BITS_SHIFT 8 + +#define SD_DATA_4BIT 0x00040000 + +#define IS_SD(x) (x->version & SD_VERSION_SD) + +#define MMC_DATA_READ 1 +#define MMC_DATA_WRITE 2 + +#define NO_CARD_ERR -16 /* No SD/MMC card inserted */ +#define UNUSABLE_ERR -17 /* Unusable Card */ +#define COMM_ERR -18 /* Communications Error */ +#define TIMEOUT -19 +#define IN_PROGRESS -20 /* operation is in progress */ + +#define MMC_CMD_GO_IDLE_STATE 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RELATIVE_ADDR 3 +#define MMC_CMD_SET_DSR 4 +#define MMC_CMD_SWITCH 6 +#define MMC_CMD_SELECT_CARD 7 +#define MMC_CMD_SEND_EXT_CSD 8 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_STOP_TRANSMISSION 12 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_SINGLE_BLOCK 17 +#define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_CMD_WRITE_SINGLE_BLOCK 24 +#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 +#define MMC_CMD_ERASE_GROUP_START 35 +#define MMC_CMD_ERASE_GROUP_END 36 +#define MMC_CMD_ERASE 38 +#define MMC_CMD_APP_CMD 55 +#define MMC_CMD_SPI_READ_OCR 58 +#define MMC_CMD_SPI_CRC_ON_OFF 59 +#define MMC_CMD_RES_MAN 62 + +#define MMC_CMD62_ARG1 0xefac62ec +#define MMC_CMD62_ARG2 0xcbaea7 + + +#define SD_CMD_SEND_RELATIVE_ADDR 3 +#define SD_CMD_SWITCH_FUNC 6 +#define SD_CMD_SEND_IF_COND 8 + +#define SD_CMD_APP_SET_BUS_WIDTH 6 +#define SD_CMD_ERASE_WR_BLK_START 32 +#define SD_CMD_ERASE_WR_BLK_END 33 +#define SD_CMD_APP_SEND_OP_COND 41 +#define SD_CMD_APP_SEND_SCR 51 + +/* SCR definitions in different words */ +#define SD_HIGHSPEED_BUSY 0x00020000 +#define SD_HIGHSPEED_SUPPORTED 0x00020000 + +#define MMC_HS_TIMING 0x00000100 +#define MMC_HS_52MHZ 0x2 + +#define OCR_BUSY 0x80000000 +#define OCR_HCS 0x40000000 +#define OCR_VOLTAGE_MASK 0x007FFF80 +#define OCR_ACCESS_MODE 0x60000000 + +#define SECURE_ERASE 0x80000000 + +#define MMC_STATUS_MASK (~0x0206BF7F) +#define MMC_STATUS_RDY_FOR_DATA (1 << 8) +#define MMC_STATUS_CURR_STATE (0xf << 9) +#define MMC_STATUS_ERROR (1 << 19) + +#define MMC_STATE_PRG (7 << 9) + +#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ +#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ +#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ +#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ +#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ +#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ +#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ +#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ +#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ +#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ +#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ +#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ +#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ +#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ +#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ +#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ +#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ + +#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ +#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits in EXT_CSD byte + addressed by index which are + 1 in value field */ +#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits in EXT_CSD byte + addressed by index, which are + 1 in value field */ +#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target byte to value */ + +#define SD_SWITCH_CHECK 0 +#define SD_SWITCH_SWITCH 1 + +/* + * EXT_CSD fields + */ +#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ +#define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */ +#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ +#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_RPMB_MULT 168 /* RO */ +#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ +#define EXT_CSD_BOOT_BUS_WIDTH 177 +#define EXT_CSD_PART_CONF 179 /* R/W */ +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_REV 192 /* RO */ +#define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ +#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ +#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_BOOT_MULT 226 /* RO */ + +/* + * EXT_CSD field definitions + */ + +#define EXT_CSD_CMD_SET_NORMAL (1 << 0) +#define EXT_CSD_CMD_SET_SECURE (1 << 1) +#define EXT_CSD_CMD_SET_CPSECURE (1 << 2) + +#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */ + +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ + +#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) +#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0) + +#define EXT_CSD_BOOT_ACK(x) (x << 6) +#define EXT_CSD_BOOT_PART_NUM(x) (x << 3) +#define EXT_CSD_PARTITION_ACCESS(x) (x << 0) + +#define EXT_CSD_BOOT_BUS_WIDTH_MODE(x) (x << 3) +#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2) +#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x) + +#define R1_ILLEGAL_COMMAND (1 << 22) +#define R1_APP_CMD (1 << 5) + +#define MMC_RSP_PRESENT (1 << 0) +#define MMC_RSP_136 (1 << 1) /* 136 bit response */ +#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ +#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ +#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ + +#define MMC_RSP_NONE (0) +#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \ + MMC_RSP_BUSY) +#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) +#define MMC_RSP_R3 (MMC_RSP_PRESENT) +#define MMC_RSP_R4 (MMC_RSP_PRESENT) +#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) + +#define MMCPART_NOAVAILABLE (0xff) +#define PART_ACCESS_MASK (0x7) +#define PART_SUPPORT (0x1) +#define PART_ENH_ATTRIB (0x1f) + +/* Maximum block size for MMC */ +#define MMC_MAX_BLOCK_LEN 512 + +/* The number of MMC physical partitions. These consist of: + * boot partitions (2), general purpose partitions (4) in MMC v4.4. + */ +#define MMC_NUM_BOOT_PARTITION 2 + +struct mmc_cid { + unsigned long psn; + unsigned short oid; + unsigned char mid; + unsigned char prv; + unsigned char mdt; + char pnm[7]; +}; + +struct mmc_cmd { + ushort cmdidx; + uint resp_type; + uint cmdarg; + uint response[4]; +}; + +struct mmc_data { + union { + char *dest; + const char *src; /* src buffers don't get written to */ + }; + uint flags; + uint blocks; + uint blocksize; +}; + +/* forward decl. */ +struct mmc; + +struct mmc_ops { + int (*send_cmd)(struct mmc *mmc, + struct mmc_cmd *cmd, struct mmc_data *data); + void (*set_ios)(struct mmc *mmc); + int (*init)(struct mmc *mmc); + int (*getcd)(struct mmc *mmc); + int (*getwp)(struct mmc *mmc); +}; + +struct mmc_config { + const char *name; + const struct mmc_ops *ops; + uint host_caps; + uint voltages; + uint f_min; + uint f_max; + uint b_max; + unsigned char part_type; +}; + +/* TODO struct mmc should be in mmc_private but it's hard to fix right now */ +struct mmc { + struct list_head link; + const struct mmc_config *cfg; /* provided configuration */ + uint version; + void *priv; + uint has_init; + int high_capacity; + uint bus_width; + uint clock; + uint card_caps; + uint ocr; + uint dsr; + uint dsr_imp; + uint scr[2]; + uint csd[4]; + uint cid[4]; + ushort rca; + char part_config; + char part_num; + uint tran_speed; + uint read_bl_len; + uint write_bl_len; + uint erase_grp_size; + u64 capacity; + u64 capacity_user; + u64 capacity_boot; + u64 capacity_rpmb; + u64 capacity_gp[4]; + block_dev_desc_t block_dev; + char op_cond_pending; /* 1 if we are waiting on an op_cond command */ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ +}; + +int mmc_register(struct mmc *mmc); +struct mmc *mmc_create(const struct mmc_config *cfg, void *priv); +void mmc_destroy(struct mmc *mmc); +int mmc_initialize(bd_t *bis); +int mmc_init(struct mmc *mmc); +int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size); +void mmc_set_clock(struct mmc *mmc, uint clock); +struct mmc *find_mmc_device(int dev_num); +int mmc_set_dev(int dev_num); +void print_mmc_devices(char separator); +int get_mmc_num(void); +int board_mmc_getcd(struct mmc *mmc); +int mmc_switch_part(int dev_num, unsigned int part_num); +int mmc_getcd(struct mmc *mmc); +int mmc_getwp(struct mmc *mmc); +int mmc_set_dsr(struct mmc *mmc, u16 val); +/* Function to change the size of boot partition and rpmb partitions */ +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize); +/* Function to modify the PARTITION_CONFIG field of EXT_CSD */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access); +/* Function to modify the BOOT_BUS_WIDTH field of EXT_CSD */ +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode); +/* Function to modify the RST_n_FUNCTION field of EXT_CSD */ +int mmc_set_rst_n_function(struct mmc *mmc, u8 enable); + +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Then you should call + * mmc_init, which would block on polling OCR status and complete the device + * initializatin. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. + */ +int mmc_start_init(struct mmc *mmc); + +/** + * Set preinit flag of mmc device. + * + * This will cause the device to be pre-inited during mmc_initialize(), + * which may save boot time if the device is not accessed until later. + * Some eMMC devices take 200-300ms to init, but unfortunately they + * must be sent a series of commands to even get them to start preparing + * for operation. + * + * @param mmc Pointer to a MMC device struct + * @param preinit preinit flag value + */ +void mmc_set_preinit(struct mmc *mmc, int preinit); + +#ifdef CONFIG_GENERIC_MMC +#ifdef CONFIG_MMC_SPI +#define mmc_host_is_spi(mmc) ((mmc)->cfg->host_caps & MMC_MODE_SPI) +#else +#define mmc_host_is_spi(mmc) 0 +#endif +struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); +#else +int mmc_legacy_init(int verbose); +#endif + +int board_mmc_init(bd_t *bis); + +/* Set block count limit because of 16 bit register limit on some hardware*/ +#ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 +#endif + +#endif /* _MMC_H_ */ |