diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/zmx25.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/zmx25.h | 163 |
1 files changed, 0 insertions, 163 deletions
diff --git a/qemu/roms/u-boot/include/configs/zmx25.h b/qemu/roms/u-boot/include/configs/zmx25.h deleted file mode 100644 index 8ffe6f1e0..000000000 --- a/qemu/roms/u-boot/include/configs/zmx25.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - * (c) 2011 Graf-Syteco, Matthias Weisser - * <weisserm@arcor.de> - * - * Configuation settings for the zmx25 board - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/imx-regs.h> - -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_MX25 -#define CONFIG_SYS_TEXT_BASE 0xA0000000 - -#define CONFIG_SYS_TIMER_RATE 32768 -#define CONFIG_SYS_TIMER_COUNTER \ - (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) - -#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25 -/* - * Environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "gs_fast_boot=setenv bootdelay 5\0" \ - "gs_slow_boot=setenv bootdelay 10\0" \ - "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \ - "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \ - "bootm 0x81000000; bootelf 0x81000000\0" - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_BOARD_LATE_INIT - -/* - * Compressions - */ -#define CONFIG_LZO - -/* - * Hardware drivers - */ - -/* - * GPIO - */ -#define CONFIG_MXC_GPIO - -/* - * Serial - */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE -#define CONFIG_CONS_INDEX 1 /* use UART2 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x00 -#define CONFIG_MII - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_NET -#define CONFIG_CMD_CACHE - -/* - * Additional command - */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB - -#define CONFIG_SYS_HUSH_PARSER - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_EHCI_MXC -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL -#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN) -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_CMD_USB */ - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */ -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE 0xA0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (128 * 1024) - -/* - * CFI FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* ~10x faster */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM + (512*1024)) -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM + PHYS_SDRAM_SIZE) - -#define CONFIG_SYS_PROMPT "zmx25> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_PREBOOT "" - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "delaygs" -#define CONFIG_AUTOBOOT_STOP_STR "stopgs" - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) - -#endif /* __CONFIG_H */ |