diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/tx25.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/tx25.h | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/tx25.h b/qemu/roms/u-boot/include/configs/tx25.h new file mode 100644 index 000000000..5ac6e6441 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/tx25.h @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +/* + * KARO TX25 board - SoC Configuration + */ +#define CONFIG_MX25 +#define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ +#define CONFIG_SYS_TIMER_RATE CONFIG_MX25_CLK32 +#define CONFIG_SYS_TIMER_COUNTER \ + (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ + +#define CONFIG_SPL +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 2048 +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x810c0000 +#define CONFIG_SYS_TEXT_BASE 0x81200000 + +#ifndef MACH_TYPE_TX25 +#define MACH_TYPE_TX25 2177 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_TX25 + +#ifdef CONFIG_SPL_BUILD +/* Start copying real U-boot from the second page */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 + +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST + +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#else +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Memory Info + */ +/* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ +/* + * Board has 2 32MB banks of DRAM but there is a bug when using + * both so only the first is configured + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE 0x02000000 +#if (CONFIG_NR_DRAM_BANKS == 2) +#define PHYS_SDRAM_2 0x90000000 +#define PHYS_SDRAM_2_SIZE 0x02000000 +#endif +/* 8MB DRAM test */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) + +/* + * Serial Info + */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ + +#define CONFIG_MXC_GPIO + +/* + * Flash & Environment + */ +/* No NOR flash present */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN +#define CONFIG_ENV_SIZE (128 * 1024) /* 128 kB NAND block size */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) + +/* NAND */ +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE (0xBB000000) +#define CONFIG_JFFS2_NAND +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE + +/* U-Boot general configuration */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print buffer sz */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP + +/* U-Boot commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_NAND +#define CONFIG_CMD_CACHE + +/* + * Ethernet + */ +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0x1f +#define CONFIG_MII +#define CONFIG_CMD_NET +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "u-boot=tx25/u-boot.bin\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "hostname=tx25\0" \ + "bootfile=tx25/uImage\0" \ + "rootpath=/opt/eldk/arm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm\0" \ + "bootcmd=run net_nfs\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0" \ + "upd=run load update\0" \ + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE) + +#endif /* __CONFIG_H */ |