diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/tseries.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/tseries.h | 265 |
1 files changed, 0 insertions, 265 deletions
diff --git a/qemu/roms/u-boot/include/configs/tseries.h b/qemu/roms/u-boot/include/configs/tseries.h deleted file mode 100644 index 8fb87ac44..000000000 --- a/qemu/roms/u-boot/include/configs/tseries.h +++ /dev/null @@ -1,265 +0,0 @@ -/* - * tseries.h - * - * specific parts for B&R T-Series Motherboard - * - * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> - - * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_TSERIES_H__ -#define __CONFIG_TSERIES_H__ - -#include <configs/bur_am335x_common.h> -/* ------------------------------------------------------------------------- */ -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define CONFIG_POWER_TPS65217 - -/* Support both device trees and ATAGs. */ -#define CONFIG_OF_LIBFDT -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_CMD_BOOTZ -/*#define CONFIG_MACH_TYPE 3589*/ -#define CONFIG_MACH_TYPE 0xFFFFFFFF /* TODO: check with kernel*/ - -/* MMC/SD IP block */ -#if defined(CONFIG_EMMC_BOOT) - #define CONFIG_MMC - #define CONFIG_GENERIC_MMC - #define CONFIG_OMAP_HSMMC - #define CONFIG_CMD_MMC - #define CONFIG_SUPPORT_EMMC_BOOT -/* RAW SD card / eMMC locations. */ - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /*addr. 0x60000 */ - #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ - #define CONFIG_SPL_MMC_SUPPORT -#endif /* CONFIG_EMMC_BOOT */ - -/* - * When we have SPI or NAND flash we expect to be making use of mtdparts, - * both for ease of use in U-Boot and for passing information on to - * the Linux kernel. - */ -#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NAND) -#define CONFIG_MTD_DEVICE /* Required for mtdparts */ -#define CONFIG_CMD_MTDPARTS -#endif /* CONFIG_SPI_BOOT, ... */ - -#undef CONFIG_SPL_OS_BOOT -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_SPL_ARGS_ADDR 0x80F80000 - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* NAND */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x080000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x140000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif /* CONFIG_NAND */ -#endif /* CONFIG_SPL_OS_BOOT */ - -#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#endif /* CONFIG_NAND */ - -/* Always 128 KiB env size */ -#define CONFIG_ENV_SIZE (128 << 10) - -#ifdef CONFIG_NAND -#define NANDARGS \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandimgsize=0x500000\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} kernel ${nandimgsize}; " \ - "bootz ${loadaddr}\0" -#else -#define NANDARGS "" -#endif /* CONFIG_NAND */ - -#ifdef CONFIG_MMC -#define MMCARGS \ - "silent=1\0" -#else -#define MMCARGS "" -#endif /* CONFIG_MMC */ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=0\0" \ - "loadaddr=0x80200000\0" \ - "bootfile=zImage\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "rootpath=/tftpboot/tseries/rootfs-small\0" \ - "nfsopts=nolock\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "run netargs; " \ - "bootm ${loadaddr}\0" \ - "usbupdate=echo Updating UBOOT from USB-Stick ...; " \ - "usb start; " \ - "fatload usb 0 0x80000000 updateubootusb.img; " \ - "source;\0" \ - "netupdate=echo Updating UBOOT from Network (TFTP) ...; " \ - "setenv autoload 0; " \ - "dhcp;" \ - "tftp 0x80000000 updateUBOOT.img;" \ - "source;\0" \ - NANDARGS \ - MMCARGS -#endif /* !CONFIG_SPL_BUILD*/ - -#define CONFIG_BOOTCOMMAND \ - "run mmcboot1;" -#define CONFIG_BOOTDELAY 1 /* TODO: für release auf 0 setzen */ - -#ifdef CONFIG_NAND -/* - * GPMC block. We support 1 device and the physical address to - * access CS0 at is 0x8000000. - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x8000000 -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_CMD_NAND -/* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */ -#define CONFIG_NAND_OMAP_ELM -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 - -#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:" \ - "128k(SPL)," \ - "128k(SPL.backup1)," \ - "128k(SPL.backup2)," \ - "128k(SPL.backup3)," \ - "512k(u-boot)," \ - "128k(u-boot-spl-os)," \ - "128k(u-boot-env)," \ - "5m(kernel),"\ - "-(rootfs)" -#endif /* CONFIG_NAND */ - -/* USB configuration */ -#define CONFIG_USB_MUSB_DSPS -#define CONFIG_ARCH_MISC_INIT -#define CONFIG_MUSB_PIO_ONLY -#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT -/* attention! not only for gadget, enables also highspeed in hostmode */ -#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_MUSB_HOST -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_HOST -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -#ifdef CONFIG_MUSB_HOST -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#endif /* CONFIG_MUSB_HOST */ - -#if defined(CONFIG_SPI_BOOT) -/* McSPI IP block */ -#define CONFIG_SPI -#define CONFIG_OMAP3_SPI -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_SPEED 24000000 - -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#undef CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ -#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ - -#elif defined(CONFIG_EMMC_BOOT) -#undef CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MMC_ENV_PART 2 -#define CONFIG_ENV_OFFSET 0x40000 /* TODO: Adresse definieren */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT - -#elif defined(CONFIG_NAND) -#undef CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x120000 /* TODO: Adresse definieren */ -#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_ENV_SIZE -#else -#error "no storage for Environment defined!" -#endif -/* - * Common filesystems support. When we have removable storage we - * enabled a number of useful commands and support. - */ -#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_CMD_FS_GENERIC -#endif /* CONFIG_MMC, ... */ - -#endif /* ! __CONFIG_TSERIES_H__ */ |