diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/spear-common.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/spear-common.h | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/qemu/roms/u-boot/include/configs/spear-common.h b/qemu/roms/u-boot/include/configs/spear-common.h deleted file mode 100644 index c0eba3721..000000000 --- a/qemu/roms/u-boot/include/configs/spear-common.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * (C) Copyright 2009 - * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SPEAR_COMMON_H -#define _SPEAR_COMMON_H -/* - * Common configurations used for both spear3xx as well as spear6xx - */ - -/* U-boot Load Address */ -#define CONFIG_SYS_TEXT_BASE 0x00700000 - -/* Ethernet driver configuration */ -#define CONFIG_MII -#define CONFIG_DESIGNWARE_ETH -#define CONFIG_NET_MULTI -#define CONFIG_PHYLIB -#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - -/* USBD driver configuration */ -#if defined(CONFIG_SPEAR_USBTTY) -#define CONFIG_DW_UDC -#define CONFIG_USB_DEVICE -#define CONFIG_USBD_HS -#define CONFIG_USB_TTY - -#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC" -#define CONFIG_USBD_MANUFACTURER "ST Microelectronics" - -#endif - -#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0" - -/* I2C driver configuration */ -#define CONFIG_HARD_I2C -#define CONFIG_DW_I2C -#if defined(CONFIG_SPEAR600) -#define CONFIG_SYS_I2C_BASE 0xD0200000 -#elif defined(CONFIG_SPEAR300) -#define CONFIG_SYS_I2C_BASE 0xD0180000 -#elif defined(CONFIG_SPEAR310) -#define CONFIG_SYS_I2C_BASE 0xD0180000 -#elif defined(CONFIG_SPEAR320) -#define CONFIG_SYS_I2C_BASE 0xD0180000 -#endif -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 0x02 - -#define CONFIG_I2C_CHIPADDRESS 0x50 - -/* Timer, HZ specific defines */ - -/* Flash configuration */ -#if defined(CONFIG_FLASH_PNOR) -#define CONFIG_SPEAR_EMI -#else -#define CONFIG_ST_SMI -#endif - -#if defined(CONFIG_ST_SMI) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BASE 0xF8000000 -#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000 -#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_CS1_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ) - -#endif - -/* - * Serial Configuration (PL011) - * CONFIG_PL01x_PORTS is defined in specific files - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_CLOCK (48 * 1000 * 1000) -#define CONFIG_CONS_INDEX 0 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \ - 57600, 115200 } - -#define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* NAND FLASH Configuration */ -#define CONFIG_SYS_NAND_SELF_INIT -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_NAND_FSMC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_QUIET_TEST - -/* - * Command support defines - */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NAND -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_NET -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <config_cmd_default.h> - -/* - * Default Environment Varible definitions - */ -#if defined(CONFIG_SPEAR_USBTTY) -#define CONFIG_BOOTDELAY -1 -#else -#define CONFIG_BOOTDELAY 1 -#endif - -#define CONFIG_ENV_OVERWRITE - -/* - * U-Boot Environment placing definitions. - */ -#if defined(CONFIG_ENV_IS_IN_FLASH) -#ifdef CONFIG_ST_SMI -/* - * Environment is in serial NOR flash - */ -#define CONFIG_SYS_MONITOR_LEN 0x00040000 -#define CONFIG_ENV_SECT_SIZE 0x00010000 -#define CONFIG_FSMTDBLK "/dev/mtdblock3 " - -#define CONFIG_BOOTCOMMAND "bootm 0xf8050000" - -#elif defined(CONFIG_SPEAR_EMI) -/* - * Environment is in parallel NOR flash - */ -#define CONFIG_SYS_MONITOR_LEN 0x00060000 -#define CONFIG_ENV_SECT_SIZE 0x00020000 -#define CONFIG_FSMTDBLK "/dev/mtdblock3 " - -#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \ - "0x4C0000; bootm 0x1600000" -#endif - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#elif defined(CONFIG_ENV_IS_IN_NAND) -/* - * Environment is in NAND - */ - -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_RANGE 0x10000 -#define CONFIG_FSMTDBLK "/dev/mtdblock7 " - -#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \ - "0x80000 0x4C0000; " \ - "bootm 0x1600000" -#endif - -#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \ - "mem=128M " \ - "root="CONFIG_FSMTDBLK \ - "rootfstype=jffs2" - -#define CONFIG_NFSBOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off " \ - "console=ttyAMA0,115200 $(othbootargs);" \ - "bootm; " - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=ttyAMA0,115200 $(othbootargs);" \ - CONFIG_BOOTCOMMAND - - -#define CONFIG_ENV_SIZE 0x02000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -/* Miscellaneous configurable options */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_BOOT_PARAMS_ADDR 0x00000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_MISC_INIT_R -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_AUTOBOOT_PROMPT \ - "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay - -#define CONFIG_SYS_MEMTEST_START 0x00800000 -#define CONFIG_SYS_MEMTEST_END 0x04000000 -#define CONFIG_SYS_MALLOC_LEN (1024*1024) -#define CONFIG_IDENT_STRING "-SPEAr" -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "u-boot> " -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x00800000 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 -#define PHYS_SDRAM_1_MAXSIZE 0x40000000 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#endif |