diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/snowball.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/snowball.h | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/qemu/roms/u-boot/include/configs/snowball.h b/qemu/roms/u-boot/include/configs/snowball.h deleted file mode 100644 index dacb5604c..000000000 --- a/qemu/roms/u-boot/include/configs/snowball.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2009 - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * #define DEBUG 1 - */ - -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SNOWBALL -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_LATE_INIT - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_U8500 - -#define CONFIG_SYS_MEMTEST_START 0x00000000 -#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF - -/*----------------------------------------------------------------------- - * Size of environment and malloc() pool - */ -/* - * If you use U-Boot as crash kernel, make sure that it does not overwrite - * information saved by kexec during panic. Kexec expects the start - * address of the executable 32K above "crashkernel" address. - */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (8*1024) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) - -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_CMD_ENV -#define CONFIG_CMD_SAVEENV -#define CONFIG_ENV_OFFSET 0x0118000 -#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ - -/* - * PL011 Configuration - */ -#define CONFIG_PL011_SERIAL -#define CONFIG_PL011_SERIAL_RLCR -#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT - -/* - * U8500 UART registers base for 3 serial devices - */ -#define CFG_UART0_BASE 0x80120000 -#define CFG_UART1_BASE 0x80121000 -#define CFG_UART2_BASE 0x80007000 -#define CFG_SERIAL0 CFG_UART0_BASE -#define CFG_SERIAL1 CFG_UART1_BASE -#define CFG_SERIAL2 CFG_UART2_BASE -#define CONFIG_PL011_CLOCK 38400000 -#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ - (void *)CFG_SERIAL2 } -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Devices and file systems - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION - -/* - * Commands - */ -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_SOURCE - -#ifndef CONFIG_BOOTDELAY -#define CONFIG_BOOTDELAY 1 -#endif -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ -"mmc dev 1; " \ - "if run loadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run mmcload; " \ - "then run mmcboot; " \ - "else " \ - "mmc dev 0; " \ - "if run emmcloadbootscript; " \ - "then run bootscript; " \ - "else " \ - "if run emmcload; " \ - "then run emmcboot; " \ - "else " \ - "echo No media to boot from; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "fi; " - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=n\0" \ - "loadaddr=0x00100000\0" \ - "console=ttyAMA2,115200n8\0" \ - "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ - "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript " \ - "from mmc ...; source ${loadaddr}\0" \ - "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ - "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ - "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ - "mem=64M@160M mem_mali=32M@224M " \ - "pmem_hwb=128M@256M mem=128M@384M\0" \ - "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ - "hwmem=168M@M160M mem=48M@328M " \ - "mem_issw=1M@383M mem=640M@384M\0" \ - "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ - "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ - "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ - "commonargs=setenv bootargs console=${console} " \ - "vmalloc=300M\0" \ - "emmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p3 " \ - "rootwait\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console}\0" \ - "emmcboot=echo Booting from eMMC ...; " \ - "run commonargs emmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "mmcargs=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk1p2 " \ - "rootwait earlyprintk\0" \ - "mmcboot=echo Booting from external MMC ...; " \ - "run commonargs mmcargs memargs; " \ - "bootm ${loadaddr}\0" \ - "fdt_high=0x2BC00000\0" \ - "stdout=serial,usbtty\0" \ - "stdin=serial,usbtty\0" \ - "stderr=serial,usbtty\0" - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SETUP_MEMORY_TAGS 2 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ - -/* - * additions for new relocation code - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET - -/* landing address before relocation */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x0 -#endif - -/* - * MMC related configs - */ -#define CONFIG_ARM_PL180_MMCI -#define MMC_BLOCK_SIZE 512 -#define CFG_EMMC_BASE 0x80114000 -#define CFG_MMC_BASE 0x80126000 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * base register values for U8500 - */ -#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ - - -/* - * U8500 GPIO register base for 9 banks - */ -#define CONFIG_DB8500_GPIO -#define CFG_GPIO_0_BASE 0x8012E000 -#define CFG_GPIO_1_BASE 0x8012E080 -#define CFG_GPIO_2_BASE 0x8000E000 -#define CFG_GPIO_3_BASE 0x8000E080 -#define CFG_GPIO_4_BASE 0x8000E100 -#define CFG_GPIO_5_BASE 0x8000E180 -#define CFG_GPIO_6_BASE 0x8011E000 -#define CFG_GPIO_7_BASE 0x8011E080 -#define CFG_GPIO_8_BASE 0xA03FE000 - -#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ - -#endif /* __CONFIG_H */ |