diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/smdk2410.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/smdk2410.h | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/smdk2410.h b/qemu/roms/u-boot/include/configs/smdk2410.h new file mode 100644 index 000000000..d4ae19f96 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/smdk2410.h @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Gary Jennejohn <garyj@denx.de> + * David Mueller <d.mueller@elsoft.ch> + * + * Configuation settings for the SAMSUNG SMDK2410 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */ + +#define CONFIG_SYS_TEXT_BASE 0x0 + +#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH + +/* input clock of PLL (the SMDK2410 has 12MHz input clock) */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Hardware drivers + */ +#define CONFIG_CS8900 /* we have a CS8900 on-board */ +#define CONFIG_CS8900_BASE 0x19000300 +#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */ + +/* + * select serial console configuration + */ +#define CONFIG_S3C24X0_SERIAL +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ + +/************************************************************ + * USB support (currently only works with D-cache off) + ************************************************************/ +#define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_S3C24XX +#define CONFIG_USB_KEYBOARD +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION + +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 + + +#define CONFIG_BAUDRATE 115200 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_USB + +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING + +/* autoboot */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_RESET_TO_RETRY +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 10.0.0.110 +#define CONFIG_SERVERIP 10.0.0.1 + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "SMDK2410 # " +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ + +#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x30800000 + +/* support additional compression methods */ +#define CONFIG_BZIP2 +#define CONFIG_LZO +#define CONFIG_LZMA + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #0 */ + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx16 +#define CONFIG_FLASH_SHOW_PROGRESS 45 + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CONFIG_SYS_MAX_FLASH_SECT (19) + +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 0x10000 +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* + * Size of malloc() pool + * BZIP2 / LZO / LZMA need a lot of RAM + */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +#define CONFIG_SYS_MONITOR_LEN (448 * 1024) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +/* + * NAND configuration + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_S3C2410 +#define CONFIG_SYS_S3C2410_NAND_HWECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x4E000000 +#endif + +/* + * File system + */ +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_YAFFS2 +#define CONFIG_RBTREE + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_BOARD_EARLY_INIT_F + +#endif /* __CONFIG_H */ |