diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/qemu-ppce500.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/qemu-ppce500.h | 207 |
1 files changed, 0 insertions, 207 deletions
diff --git a/qemu/roms/u-boot/include/configs/qemu-ppce500.h b/qemu/roms/u-boot/include/configs/qemu-ppce500.h deleted file mode 100644 index 763a47ac3..000000000 --- a/qemu/roms/u-boot/include/configs/qemu-ppce500.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright 2011-2014 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Corenet DS style board configuration file - */ -#ifndef __QEMU_PPCE500_H -#define __QEMU_PPCE500_H - -#define CONFIG_CMD_REGINFO - -/* High Level Configuration Options */ -#define CONFIG_BOOKE -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_QEMU_E500 - -#undef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */ -#define CONFIG_SYS_GENERIC_BOARD - -#define CONFIG_SYS_MPC85XX_NO_RESETVEC - -#define CONFIG_SYS_RAMBOOT - -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCI1 1 /* PCI controller 1 */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_ADDR_MAP -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -/* Needed to fill the ccsrbar pointer */ -#define CONFIG_BOARD_EARLY_INIT_F - -/* Virtual address to CCSRBAR */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 -/* Physical address should be a function call */ -#ifndef __ASSEMBLY__ -extern unsigned long long get_phys_ccsrbar_addr_early(void); -#endif -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE - -/* Virtual address range for PCI region maps */ -#define CONFIG_SYS_PCI_MAP_START 0x80000000 -#define CONFIG_SYS_PCI_MAP_END 0xe8000000 - -/* Virtual address to a temporary map if we need it (max 128MB) */ -#define CONFIG_SYS_TMPVIRT 0xe8000000 - -/* - * DDR Setup - */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_CHIP_SELECTS_PER_CTRL 0 - -#define CONFIG_SYS_CLK_FREQ 33000000 - -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_ENV_IS_NOWHERE - -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000 -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* new uImage format support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_E1000 - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_DOS_PARTITION -#endif /* CONFIG_PCI */ - -#define CONFIG_LBA48 -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_EXT2 - -/* - * Environment - */ -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ - -#define CONFIG_LAST_STAGE_INIT - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -/* - * Environment Configuration - */ -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 1 -#define CONFIG_BOOTCOMMAND \ - "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0" - -#endif /* __QEMU_PPCE500_H */ |