1 files changed, 0 insertions, 153 deletions
diff --git a/qemu/roms/u-boot/include/configs/pxm2.h b/qemu/roms/u-boot/include/configs/pxm2.h
deleted file mode 100644
index 6276d4339..000000000
--- a/qemu/roms/u-boot/include/configs/pxm2.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * siemens pxm2
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * Based on:
- * U-Boot file:/include/configs/am335x_evm.h
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_PXM2_H
-#define __CONFIG_PXM2_H
-
-#define CONFIG_SIEMENS_PXM2
-#define MACH_TYPE_PXM2			4309
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2
-
-#include "siemens-am33x-common.h"
-
-#define CONFIG_SYS_MPUCLK	720
-#define DXR2_IOCTRL_VAL		0x18b
-#define DDR_PLL_FREQ		266
-
-#define BOARD_DFU_BUTTON_GPIO	59
-#define BOARD_DFU_BUTTON_LED	117
-#define BOARD_LCD_POWER		111
-#define BOARD_BACK_LIGHT	112
-#define BOARD_TOUCH_POWER	57
-
- /* Physical Memory Map */
-#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-
-
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300
-
-#undef CONFIG_SPL_NET_SUPPORT
-#undef CONFIG_SPL_NET_VCI_STRING
-#undef CONFIG_SPL_ETH_SUPPORT
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_FACTORYSET
-
-/* UBI Support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#endif
-
-/* Watchdog */
-#define CONFIG_OMAP_WATCHDOG
-
-#ifndef CONFIG_SPL_BUILD
-
-/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"hostname=pxm2\0" \
-	"nand_img_size=0x500000\0" \
-	"optargs=\0" \
-	"splashpos=m,m\0"	\
-	CONFIG_COMMON_ENV_SETTINGS \
-	"mmc_dev=0\0" \
-	"mmc_root=/dev/mmcblk0p2 rw\0" \
-	"mmc_root_fs_type=ext4 rootwait\0" \
-	"mmc_load_uimage=" \
-		"mmc rescan; " \
-		"setenv bootfile uImage;" \
-		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
-	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
-	"mmc_args=run bootargs_defaults;" \
-		"mtdparts default;" \
-		"setenv bootargs ${bootargs} " \
-		"root=${mmc_root} ${mtdparts}" \
-		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
-		"eth=${ethaddr} " \
-		"\0" \
-	"mmc_boot=run mmc_args; " \
-		"run mmc_load_uimage; " \
-		"bootm ${kloadaddr}\0" \
-	""
-
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY		3
-
-#define CONFIG_BOOTCOMMAND \
-	"if dfubutton; then " \
-		"run dfu_start; " \
-		"reset; " \
-	"fi; " \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmc_dev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run mmc_load_uimage; then " \
-			"run mmc_args;" \
-			"bootm ${kloadaddr};" \
-		"fi;" \
-	"fi;" \
-	"run nand_boot;" \
-	"reset;"
-
-#else
-#define CONFIG_BOOTDELAY		0
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
-
-#define CONFIG_VIDEO
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CMD_BMP
-#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
-#define PWM_TICKS	0x1388
-#define PWM_DUTY	0x200
-#define CONFIG_SYS_CONSOLE_BG_COL	0xff
-#define CONFIG_SYS_CONSOLE_FG_COL	0x00
-#endif
-
-#endif	/* ! __CONFIG_PXM2_H */