diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/pb1x00.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/pb1x00.h | 192 |
1 files changed, 0 insertions, 192 deletions
diff --git a/qemu/roms/u-boot/include/configs/pb1x00.h b/qemu/roms/u-boot/include/configs/pb1x00.h deleted file mode 100644 index f92496571..000000000 --- a/qemu/roms/u-boot/include/configs/pb1x00.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file contains the configuration parameters for the dbau1x00 board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PB1X00 1 -#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ - -#ifdef CONFIG_PB1000 -#define CONFIG_SOC_AU1000 1 -#else -#ifdef CONFIG_PB1100 -#define CONFIG_SOC_AU1100 1 -#else -#ifdef CONFIG_PB1500 -#define CONFIG_SOC_AU1500 1 -#else -#error "No valid board set" -#endif -#endif -#endif - -#define CONFIG_SYS_LITTLE_ENDIAN - -#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ - -#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "panic=1\0" \ - "bootfile=/vmlinux.img\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "" -/* Boot from NFS root */ -#define CONFIG_BOOTCOMMAND "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm" - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "Pb1x00 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ 396000000 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#undef CONFIG_SYS_MEMTEST_START -#define CONFIG_SYS_MEMTEST_START 0x80200000 -#define CONFIG_SYS_MEMTEST_END 0x83800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x4000000 - -/* We boot from this flash, selected with dip switch */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_NOWHERE 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0030000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 2 - - -#define CONFIG_MEMSIZE_IN_BYTES - - -/*---USB -------------------------------------------*/ -#if 0 -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#endif - -/*---ATA PCMCIA ------------------------------------*/ -#if 0 -#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 -#define CONFIG_PCMCIA_SLOT_A - -#define CONFIG_ATAPI 1 -#define CONFIG_MAC_PARTITION 1 - -/* We run CF in "true ide" mode or a harddrive via pcmcia */ -#define CONFIG_IDE_PCMCIA 1 - -/* We only support one slot for now */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET 8 - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET 0 - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -#endif -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 32 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_FAT -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IDE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_RUN -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_ELF -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_BEDBUG - -#endif /* __CONFIG_H */ |