diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/o3dnt.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/o3dnt.h | 70 |
1 files changed, 70 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/o3dnt.h b/qemu/roms/u-boot/include/configs/o3dnt.h new file mode 100644 index 000000000..05cd36081 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/o3dnt.h @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2012 + * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFC000000 boot low boot high (standard configuration) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ +#endif + +/* Board specific flash config */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +/* + * Include common defines for all ifm boards + */ +#include "o2dnt-common.h" + +/* Additional commands */ +#define CONFIG_CMD_BSP +#define CONFIG_CMD_REGINFO + +/* + * GPIO configuration: + * no CAN + no PCI + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000 + +/* Other board specific configs */ +#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 +#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ + +#define CONFIG_BOARD_NAME "o3dnt" +#define CONFIG_BOARD_BOOTCMD "run flash_self" +#define CONFIG_BOARD_MEM_LIMIT xstr(62) +#define BOARD_POST_CRC32_END xstr(0x01000000) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_OLD \ + CONFIG_IFM_DEFAULT_ENV_NEW \ + "linbot=fc060000\0" \ + "lintop=fc15ffff\0" \ + "rambot=fc160000\0" \ + "ramtop=fc55ffff\0" \ + "jffbot=fc560000\0" \ + "jfftop=fce5ffff\0" \ + "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ + "ubotop=fc03ffff\0" \ + "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ + "calbot=fce60000\0" \ + "caltop=fcffffff\0" \ + "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ + "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ + "kernel_addr=0xfc060000\0" \ + "ramdisk_addr=0xfc160000\0" \ + "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \ + "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" |