diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/nios2-generic.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/nios2-generic.h | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/qemu/roms/u-boot/include/configs/nios2-generic.h b/qemu/roms/u-boot/include/configs/nios2-generic.h deleted file mode 100644 index 1578b010b..000000000 --- a/qemu/roms/u-boot/include/configs/nios2-generic.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * (C) Copyright 2005, Psyent Corporation <www.psyent.com> - * Scott McNutt <smcnutt@psyent.com> - * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * BOARD/CPU - */ -#include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */ -#define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */ -#define CONFIG_BOARD_EARLY_INIT_F /* enable early board-spec. init */ -#define CONFIG_SYS_NIOS_SYSID_BASE CONFIG_SYS_SYSID_BASE - -/* - * SERIAL - */ -#define CONFIG_ALTERA_UART -#if defined(CONFIG_ALTERA_JTAG_UART) -# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_JTAG_UART_BASE -#else -# define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_UART_BASE -#endif - -#define CONFIG_ALTERA_JTAG_UART_BYPASS -#define CONFIG_SYS_NIOS_FIXEDBAUD -#define CONFIG_BAUDRATE CONFIG_SYS_UART_BAUD -#define CONFIG_SYS_BAUDRATE_TABLE {CONFIG_BAUDRATE} -#define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */ - -/* - * TIMER - */ -#define CONFIG_SYS_LOW_RES_TIMER -#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_TIMER_BASE -#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_TIMER_IRQ -#define CONFIG_SYS_NIOS_TMRMS 10 /* Desired period (msec)*/ -#define CONFIG_SYS_NIOS_TMRCNT \ - (CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1) - -/* - * STATUS LED - */ -#define CONFIG_ALTERA_PIO -#define CONFIG_SYS_ALTERA_PIO_NUM 1 -#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM LED_PIO_WIDTH - -#define CONFIG_STATUS_LED /* Enable status driver */ -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED /* Enable GPIO LED driver */ -#define CONFIG_GPIO /* Enable GPIO driver */ - -#define STATUS_LED_BIT 0 /* Bit-0 on GPIO */ -#define STATUS_LED_STATE 1 /* Blinking */ -#define STATUS_LED_PERIOD (500 / CONFIG_SYS_NIOS_TMRMS) /* 500 msec */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BOOTD -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_ITEST -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_SETGETDCR -#undef CONFIG_CMD_XIMG - -#ifdef CONFIG_CMD_NET -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_PING -#endif - -/* - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the - * reset address, no? This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - */ -#define CONFIG_ENV_IS_IN_FLASH - -#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR ((CONFIG_SYS_RESET_ADDR + \ - CONFIG_SYS_MONITOR_LEN) | \ - CONFIG_SYS_FLASH_BASE) - -/* - * MEMORY ORGANIZATION - * -Monitor at top of sdram. - * -The heap is placed below the monitor - * -The stack is placed below the heap (&grows down). - */ -#define CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_SDRAM_SIZE - \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x20000) -#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_INIT_SP CONFIG_SYS_MALLOC_BASE - -/* - * MISC - */ -#define CONFIG_SYS_LONGHELP /* Provide extended help */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ -#define CONFIG_SYS_MAXARGS 16 /* Max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + \ - 16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - 0x20000) -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_HUSH_PARSER - -#endif /* __CONFIG_H */ |