diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/mv-common.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/mv-common.h | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/qemu/roms/u-boot/include/configs/mv-common.h b/qemu/roms/u-boot/include/configs/mv-common.h deleted file mode 100644 index 721b75dae..000000000 --- a/qemu/roms/u-boot/include/configs/mv-common.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file contains Marvell Board Specific common defincations. - * This file should be included in board config header file. - * - * It supports common definations for Kirkwood platform - * TBD: support for Orion5X platforms - */ - -#ifndef _MV_COMMON_H -#define _MV_COMMON_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_MARVELL 1 - -/* - * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0x00600000 -#endif /* CONFIG_SYS_TEXT_BASE */ - -/* additions for new ARM relocation support */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* - * CLKs configurations - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ - 115200,230400, 460800, 921600 } -/* auto boot */ -#define CONFIG_BOOTDELAY 3 /* default enable autoboot */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ - -#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */ - -/* - * Other required minimal configurations - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */ -#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ -#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ -#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ -#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ - -/* ====> Include platform Common Definitions */ -#include <asm/arch/config.h> - -/* - * DRAM Banks configuration, Custom config can be done in <board>.h - */ -#ifndef CONFIG_NR_DRAM_BANKS -#define CONFIG_NR_DRAM_BANKS CONFIG_NR_DRAM_BANKS_MAX -#else -#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX) -#error CONFIG_NR_DRAM_BANKS Configurated more than available -#endif -#endif /* CONFIG_NR_DRAM_BANKS */ - -/* ====> Include driver Common Definitions */ -/* - * Common NAND configuration - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif - -/* - * Common SPI Flash configuration - */ -#ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH 1 -#define CONFIG_SPI_FLASH_MACRONIX 1 -#endif - -/* - * Common USB/EHCI configuration - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI /* Enable EHCI USB support */ -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SUPPORT_VFAT -#endif /* CONFIG_CMD_USB */ - -/* - * File system - */ -#ifdef CONFIG_SYS_MVFS -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_RBTREE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_LZO -#endif - -#endif /* _MV_COMMON_H */ |