diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/microblaze-generic.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/microblaze-generic.h | 510 |
1 files changed, 0 insertions, 510 deletions
diff --git a/qemu/roms/u-boot/include/configs/microblaze-generic.h b/qemu/roms/u-boot/include/configs/microblaze-generic.h deleted file mode 100644 index 06b7e9418..000000000 --- a/qemu/roms/u-boot/include/configs/microblaze-generic.h +++ /dev/null @@ -1,510 +0,0 @@ -/* - * (C) Copyright 2007-2010 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "../board/xilinx/microblaze-generic/xparameters.h" - -/* MicroBlaze CPU */ -#define CONFIG_MICROBLAZE 1 -#define MICROBLAZE_V5 1 - -/* Open Firmware DTS */ -#define CONFIG_OF_CONTROL 1 -#define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic - -/* linear and spi flash memory */ -#ifdef XILINX_FLASH_START -#define FLASH -#undef SPIFLASH -#undef RAMENV /* hold environment in flash */ -#else -#ifdef XILINX_SPI_FLASH_BASEADDR -#undef FLASH -#define SPIFLASH -#undef RAMENV /* hold environment in flash */ -#else -#undef FLASH -#undef SPIFLASH -#define RAMENV /* hold environment in RAM */ -#endif -#endif - -/* uart */ -#ifdef XILINX_UARTLITE_BASEADDR -# define CONFIG_XILINX_UARTLITE -# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR -# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE -# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE } -# define CONSOLE_ARG "console=console=ttyUL0,115200\0" -#elif XILINX_UART16550_BASEADDR -# define CONFIG_SYS_NS16550 1 -# define CONFIG_SYS_NS16550_SERIAL -# if defined(__MICROBLAZEEL__) -# define CONFIG_SYS_NS16550_REG_SIZE -4 -# else -# define CONFIG_SYS_NS16550_REG_SIZE 4 -# endif -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_COM1 \ - ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000) -# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ -# define CONFIG_BAUDRATE 115200 - -/* The following table includes the supported baudrates */ -# define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} -# define CONSOLE_ARG "console=console=ttyS0,115200\0" -#else -# error Undefined uart -#endif - -/* setting reset address */ -/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/ - -/* ethernet */ -#undef CONFIG_SYS_ENET -#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL) -# define CONFIG_XILINX_EMACLITE 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_LLTEMAC_BASEADDR) -# define CONFIG_XILINX_LL_TEMAC 1 -# define CONFIG_SYS_ENET -#endif -#if defined(XILINX_AXIEMAC_BASEADDR) -# define CONFIG_XILINX_AXIEMAC 1 -# define CONFIG_SYS_ENET -#endif - -#undef ET_DEBUG - -/* gpio */ -#ifdef XILINX_GPIO_BASEADDR -# define CONFIG_XILINX_GPIO -# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR -#endif - -/* interrupt controller */ -#ifdef XILINX_INTC_BASEADDR -# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR -# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS -#endif - -/* timer */ -#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) -# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR -# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -#endif - -/* watchdog */ -#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ) -# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR -# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ -# define CONFIG_HW_WATCHDOG -# define CONFIG_XILINX_TB_WATCHDOG -#endif - -/* - * memory layout - Example - * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk - * CONFIG_SYS_SRAM_BASE = 0x1000_0000; - * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB - * - * CONFIG_SYS_MONITOR_LEN = 0x40000 - * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000 - * - * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000 - * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000 - * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000 - * - * 0x1000_0000 CONFIG_SYS_SDRAM_BASE - * MEMTEST_AREA 64kB - * FREE - * 0x1200_0000 CONFIG_SYS_TEXT_BASE - * U-BOOT code - * 0x1202_0000 - * FREE - * - * STACK - * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE - * MALLOC_AREA 768kB Alloc - * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE - * MONITOR_CODE 256kB Env - * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET - * GLOBAL_DATA 4kB bd, gd - * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - */ - -/* ddr sdram - main memory */ -#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START -#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) - -/* global pointer */ -/* start of global data */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* monitor code */ -#define SIZE 0x40000 -#define CONFIG_SYS_MONITOR_LEN SIZE -#define CONFIG_SYS_MONITOR_BASE \ - (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ - - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE) -#define CONFIG_SYS_MONITOR_END \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_MALLOC_LEN (SIZE * 3) -#define CONFIG_SYS_MALLOC_BASE \ - (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) - -/* stack */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE - -/* - * CFI flash memory layout - Example - * CONFIG_SYS_FLASH_BASE = 0x2200_0000; - * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB - * - * SECT_SIZE = 0x20000; 128kB is one sector - * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store - * - * 0x2200_0000 CONFIG_SYS_FLASH_BASE - * FREE 256kB - * 0x2204_0000 CONFIG_ENV_ADDR - * ENV_AREA 128kB - * 0x2206_0000 - * FREE - * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - * - */ - -#ifdef FLASH -# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START -# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE -# define CONFIG_SYS_FLASH_CFI 1 -# define CONFIG_FLASH_CFI_DRIVER 1 -/* ?empty sector */ -# define CONFIG_SYS_FLASH_EMPTY_INFO 1 -/* max number of memory banks */ -# define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -# define CONFIG_SYS_MAX_FLASH_SECT 512 -/* hardware flash protection */ -# define CONFIG_SYS_FLASH_PROTECTION -/* use buffered writes (20x faster) */ -# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -# ifdef RAMENV -# define CONFIG_ENV_IS_NOWHERE 1 -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - -# else /* FLASH && !RAMENV */ -# define CONFIG_ENV_IS_IN_FLASH 1 -/* 128K(one sector) for env */ -# define CONFIG_ENV_SECT_SIZE 0x20000 -# define CONFIG_ENV_ADDR \ - (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE)) -# define CONFIG_ENV_SIZE 0x20000 -# endif /* FLASH && !RAMBOOT */ -#else /* !FLASH */ - -#ifdef SPIFLASH -# define CONFIG_SYS_NO_FLASH 1 -# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR -# define CONFIG_XILINX_SPI 1 -# define CONFIG_SPI 1 -# define CONFIG_SPI_FLASH 1 -# define CONFIG_SPI_FLASH_STMICRO 1 -# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 -# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ -# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS - -# ifdef RAMENV -# define CONFIG_ENV_IS_NOWHERE 1 -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) - -# else /* SPIFLASH && !RAMENV */ -# define CONFIG_ENV_IS_IN_SPI_FLASH 1 -# define CONFIG_ENV_SPI_MODE SPI_MODE_3 -# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -/* 128K(two sectors) for env */ -# define CONFIG_ENV_SECT_SIZE 0x10000 -# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE) -/* Warning: adjust the offset in respect of other flash content and size */ -# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */ -# endif /* SPIFLASH && !RAMBOOT */ -#else /* !SPIFLASH */ - -/* ENV in RAM */ -# define CONFIG_SYS_NO_FLASH 1 -# define CONFIG_ENV_IS_NOWHERE 1 -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE) -#endif /* !SPIFLASH */ -#endif /* !FLASH */ - -/* system ace */ -#ifdef XILINX_SYSACE_BASEADDR -# define CONFIG_SYSTEMACE -/* #define DEBUG_SYSTEMACE */ -# define SYSTEMACE_CONFIG_FPGA -# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -# define CONFIG_DOS_PARTITION -#endif - -#if defined(XILINX_USE_ICACHE) -# define CONFIG_ICACHE -#else -# undef CONFIG_ICACHE -#endif - -#if defined(XILINX_USE_DCACHE) -# define CONFIG_DCACHE -#else -# undef CONFIG_DCACHE -#endif - -#ifndef XILINX_DCACHE_BYTE_SIZE -#define XILINX_DCACHE_BYTE_SIZE 32768 -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MFSL -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_GPIO - -#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) -# define CONFIG_CMD_CACHE -#else -# undef CONFIG_CMD_CACHE -#endif - -#ifndef CONFIG_SYS_ENET -# undef CONFIG_CMD_NET -# undef CONFIG_CMD_NFS -#else -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -# define CONFIG_CMD_TFTPPUT -#endif - -#if defined(CONFIG_SYSTEMACE) -# define CONFIG_CMD_EXT2 -# define CONFIG_CMD_FAT -#endif - -#if defined(FLASH) -# define CONFIG_CMD_ECHO -# define CONFIG_CMD_FLASH -# define CONFIG_CMD_IMLS -# define CONFIG_CMD_JFFS2 -# define CONFIG_CMD_UBI -# undef CONFIG_CMD_UBIFS - -# if !defined(RAMENV) -# define CONFIG_CMD_SAVEENV -# define CONFIG_CMD_SAVES -# endif - -#else -#if defined(SPIFLASH) -# define CONFIG_CMD_SF - -# if !defined(RAMENV) -# define CONFIG_CMD_SAVEENV -# define CONFIG_CMD_SAVES -# endif -#else -# undef CONFIG_CMD_IMLS -# undef CONFIG_CMD_FLASH -# undef CONFIG_CMD_JFFS2 -# undef CONFIG_CMD_UBI -# undef CONFIG_CMD_UBIFS -#endif -#endif - -#if defined(CONFIG_CMD_JFFS2) -# define CONFIG_MTD_PARTITIONS -#endif - -#if defined(CONFIG_CMD_UBIFS) -# define CONFIG_CMD_UBI -# define CONFIG_LZO -#endif - -#if defined(CONFIG_CMD_UBI) -# define CONFIG_MTD_PARTITIONS -# define CONFIG_RBTREE -#endif - -#if defined(CONFIG_MTD_PARTITIONS) -/* MTD partitions */ -#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */ -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=flash-0" - -/* default mtd partition table */ -#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\ - "256k(env),3m(kernel),1m(romfs),"\ - "1m(cramfs),-(jffs2)" -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_PROMPT "U-Boot-mONStR> " -/* size of console buffer */ -#define CONFIG_SYS_CBSIZE 512 - /* print buffer size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 15 -#define CONFIG_SYS_LONGHELP -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START - -#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ -#define CONFIG_BOOTARGS "root=romfs" -#define CONFIG_HOSTNAME XILINX_BOARD_NAME -#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.5 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD - -/* architecture dependent code */ -#define CONFIG_SYS_USR_EXCEP /* user exception */ - -#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo" - -#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \ - "nor0=flash-0\0"\ - "mtdparts=mtdparts=flash-0:"\ - "256k(u-boot),256k(env),3m(kernel),"\ - "1m(romfs),1m(cramfs),-(jffs2)\0"\ - "nc=setenv stdout nc;"\ - "setenv stdin nc\0" \ - "serial=setenv stdout serial;"\ - "setenv stdin serial\0" - -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_NETCONSOLE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* Enable flat device tree support */ -#define CONFIG_LMB 1 -#define CONFIG_FIT 1 -#define CONFIG_OF_LIBFDT 1 - -#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC) -# define CONFIG_MII 1 -# define CONFIG_CMD_MII 1 -# define CONFIG_PHY_GIGE 1 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 -# define CONFIG_PHYLIB 1 -# define CONFIG_PHY_ATHEROS 1 -# define CONFIG_PHY_BROADCOM 1 -# define CONFIG_PHY_DAVICOM 1 -# define CONFIG_PHY_LXT 1 -# define CONFIG_PHY_MARVELL 1 -# define CONFIG_PHY_MICREL 1 -# define CONFIG_PHY_NATSEMI 1 -# define CONFIG_PHY_REALTEK 1 -# define CONFIG_PHY_VITESSE 1 -#else -# undef CONFIG_MII -# undef CONFIG_CMD_MII -# undef CONFIG_PHYLIB -#endif - -/* SPL part */ -#define CONFIG_SPL -#define CONFIG_CMD_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_BOARD_INIT - -#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds" - -#define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_NOR_SUPPORT - -/* for booting directly linux */ -#define CONFIG_SPL_OS_BOOT - -#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \ - 0x60000) -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ - 0x40000) -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ - 0x1000000) - -/* SP location before relocation, must use scratch RAM */ -/* BRAM start */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x0 -/* BRAM size - will be generated */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -/* Stack pointer prior relocation, must situated at on-chip RAM */ -#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100 - -/* - * The main reason to do it in this way is that MALLOC_START - * can't be defined - common/spl/spl.c - */ -#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0) -# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \ - CONFIG_SYS_SPL_MALLOC_SIZE) -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START -#else -# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END -#endif - -/* Just for sure that there is a space for stack */ -#define CONFIG_SPL_STACK_SIZE 0x100 - -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_INIT_RAM_ADDR - \ - GENERATED_GBL_DATA_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE - \ - CONFIG_SPL_STACK_SIZE) - -#endif /* __CONFIG_H */ |