diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/m28evk.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/m28evk.h | 204 |
1 files changed, 0 insertions, 204 deletions
diff --git a/qemu/roms/u-boot/include/configs/m28evk.h b/qemu/roms/u-boot/include/configs/m28evk.h deleted file mode 100644 index bb1fa44d8..000000000 --- a/qemu/roms/u-boot/include/configs/m28evk.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIGS_M28EVK_H__ -#define __CONFIGS_M28EVK_H__ - - -/* System configurations */ -#define CONFIG_MX28 /* i.MX28 SoC */ -#define MACH_TYPE_M28EVK 3613 -#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK - -/* U-Boot Commands */ -#define CONFIG_SYS_NO_FLASH -#include <config_cmd_default.h> -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_GPIO -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_SF -#define CONFIG_CMD_SPI -#define CONFIG_CMD_USB -#define CONFIG_VIDEO - -#define CONFIG_REGEX /* Enable regular expression support */ - -/* Memory configuration */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x40000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Environment */ -#define CONFIG_ENV_SIZE (16 * 1024) -#define CONFIG_ENV_IS_IN_NAND - -/* Environment is in NAND */ -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_RANGE (512 * 1024) -#define CONFIG_ENV_OFFSET 0x300000 -#define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) - -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_RBTREE -#define CONFIG_LZO -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nand0=gpmi-nand" -#define MTDPARTS_DEFAULT \ - "mtdparts=gpmi-nand:" \ - "3m(bootloader)ro," \ - "512k(environment)," \ - "512k(redundant-environment)," \ - "4m(kernel)," \ - "128k(fdt)," \ - "8m(ramdisk)," \ - "-(filesystem)" -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#endif - -/* EEPROM */ -#ifdef CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#endif - -/* RTC */ -#ifdef CONFIG_CMD_DATE -/* Use the internal RTC in the MXS chip */ -#define CONFIG_RTC_INTERNAL -#ifdef CONFIG_RTC_INTERNAL -#define CONFIG_RTC_MXS -#else -#define CONFIG_RTC_M41T62 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 -#endif -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_MXS_PORT0 -#define CONFIG_EHCI_MXS_PORT1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_USB_STORAGE -#endif - -/* SPI */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_DEFAULT_SPI_BUS 2 -#define CONFIG_DEFAULT_SPI_CS 0 -#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 - -/* SPI FLASH */ -#ifdef CONFIG_CMD_SF -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SF_DEFAULT_BUS 2 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 40000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -#define CONFIG_ENV_SPI_BUS 2 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 40000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 -#endif - -#endif - -/* LCD */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) -#endif - -/* Booting Linux */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 " -#define CONFIG_BOOTCOMMAND "run bootcmd_net" -#define CONFIG_LOADADDR 0x42000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Extra Environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_nand_full_filename=u-boot.nand\0" \ - "update_nand_firmware_filename=u-boot.sb\0" \ - "update_sd_firmware_filename=u-boot.sd\0" \ - "update_nand_firmware_maxsz=0x100000\0" \ - "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ - "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ - "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ - "nand device 0 ; " \ - "nand info ; " \ - "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ - "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ - "update_nand_full=" /* Update FCB, DBBT and FW */ \ - "if tftp ${update_nand_full_filename} ; then " \ - "run update_nand_get_fcb_size ; " \ - "nand scrub -y 0x0 ${filesize} ; " \ - "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ - "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ - "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ - "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ - "fi\0" \ - "update_nand_firmware=" /* Update only firmware */ \ - "if tftp ${update_nand_firmware_filename} ; then " \ - "run update_nand_get_fcb_size ; " \ - "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ - "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ - "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ - "nand erase ${fcb_sz} ${fw_sz} ; " \ - "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ - "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ - "fi\0" \ - "update_sd_firmware=" /* Update the SD firmware partition */ \ - "if mmc rescan ; then " \ - "if tftp ${update_sd_firmware_filename} ; then " \ - "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ - "setexpr fw_sz ${fw_sz} + 1 ; " \ - "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ - "fi ; " \ - "fi\0" - -/* The rest of the configuration is shared */ -#include <configs/mxs.h> - -#endif /* __CONFIGS_M28EVK_H__ */ |