1 files changed, 0 insertions, 128 deletions
diff --git a/qemu/roms/u-boot/include/configs/kwb.h b/qemu/roms/u-boot/include/configs/kwb.h
deleted file mode 100644
index 0f631c0f6..000000000
--- a/qemu/roms/u-boot/include/configs/kwb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * kwb.h
- *
- * specific parts for B&R KWB Motherboard
- *
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> -
- * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
- *
- * SPDX-License-Identifier:        GPL-2.0+
- */
-
-#ifndef __CONFIG_KWB_H__
-#define __CONFIG_KWB_H__
-
-#include <configs/bur_am335x_common.h>
-/* ------------------------------------------------------------------------- */
-/* Clock Defines */
-#define V_OSCK				26000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#define CONFIG_POWER_TPS65217
-
-#define CONFIG_MACH_TYPE		3589
-/* I2C IP block */
-#define CONFIG_SYS_OMAP24_I2C_SPEED_PSOC	20000
-
-/* GPIO */
-#define CONFIG_SPL_GPIO_SUPPORT
-
-/* MMC/SD IP block */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-/* RAW SD card / eMMC locations. */
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
-#define CONFIG_SPL_MMC_SUPPORT
-
-#undef CONFIG_SPL_OS_BOOT
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
-
-/* RAW SD card / eMMC */
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x900	/* address 0x120000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
-
-#endif /* CONFIG_SPL_OS_BOOT */
-
-/* Always 128 KiB env size */
-#define CONFIG_ENV_SIZE			(128 << 10)
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"autoload=0\0" \
-	"loadaddr=0x80100000\0" \
-	"bootfile=arimg\0" \
-	"usbboot=echo Booting from USB-Stick ...; " \
-		"usb start; " \
-		"fatload usb 0 ${loadaddr} ${bootfile}; " \
-		"usb stop; " \
-		"go ${loadaddr};\0" \
-	"netboot=echo Booting from network ...; " \
-		"setenv autoload 0; " \
-		"dhcp; " \
-		"tftp ${loadaddr} arimg; " \
-		"go ${loadaddr}\0" \
-	"usbupdate=echo Updating UBOOT from USB-Stick ...; " \
-		"usb start; " \
-		"fatload usb 0 0x80000000 updateubootusb.img; " \
-		"source;\0" \
-	"netupdate=echo Updating UBOOT from Network (TFTP) ...; " \
-		"setenv autoload 0; " \
-		"dhcp;" \
-		"tftp 0x80000000 updateUBOOT.img;" \
-		"source;\0"
-#endif /* !CONFIG_SPL_BUILD*/
-
-#define CONFIG_BOOTCOMMAND \
-	"run usbupdate;"
-#define CONFIG_BOOTDELAY		1 /* TODO: für release auf 0 setzen */
-
-/* undefine command which we not need here */
-#undef	CONFIG_BOOTM_LINUX
-#undef	CONFIG_BOOTM_NETBSD
-#undef	CONFIG_BOOTM_PLAN9
-#undef	CONFIG_BOOTM_RTEMS
-#undef	CONFIG_GZIP
-#undef	CONFIG_ZLIB
-#undef CONFIG_CMD_CRC32
-
-/* USB configuration */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
-/* attention! not only for gadget, enables also highspeed in hostmode */
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_MUSB_HOST
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
-
-#ifdef CONFIG_MUSB_HOST
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif /* CONFIG_MUSB_HOST */
-
-#undef CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		1
-#define CONFIG_SYS_MMC_ENV_PART		2
-#define CONFIG_ENV_OFFSET		0x40000	/* TODO: Adresse definieren */
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-/*
- * Common filesystems support.  When we have removable storage we
- * enabled a number of useful commands and support.
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_FAT_WRITE
-#define CONFIG_CMD_FS_GENERIC
-#endif /* CONFIG_MMC, ... */
-
-#endif	/* ! __CONFIG_TSERIES_H__ */