diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/km8360.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/km8360.h | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/qemu/roms/u-boot/include/configs/km8360.h b/qemu/roms/u-boot/include/configs/km8360.h deleted file mode 100644 index f5ac32a33..000000000 --- a/qemu/roms/u-boot/include/configs/km8360.h +++ /dev/null @@ -1,288 +0,0 @@ -/* - * (C) Copyright 2012 - * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com> - * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* KMBEC FPGA (PRIO) */ -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 64 - -#if defined CONFIG_KMETER1 -#define CONFIG_HOSTNAME kmeter1 -#define CONFIG_KM_BOARD_NAME "kmeter1" -#define CONFIG_KM_DEF_NETDEV "netdev=eth2\0" -#elif defined CONFIG_KMCOGE5NE -#define CONFIG_HOSTNAME kmcoge5ne -#define CONFIG_KM_BOARD_NAME "kmcoge5ne" -#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" -#define CONFIG_CMD_NAND -#define CONFIG_NAND_ECC_BCH -#define CONFIG_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" -#define MTDIDS_DEFAULT "nor0=boot,nand0=app" - -#define MTDPARTS_DEFAULT "mtdparts=" \ - "boot:" \ - "768k(u-boot)," \ - "128k(env)," \ - "128k(envred)," \ - "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \ - "app:" \ - "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");" -#else -#error ("Board not supported") -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_QE /* Has QE */ -#define CONFIG_MPC8360 /* MPC8360 CPU specific */ - -#define CONFIG_SYS_TEXT_BASE 0xF0000000 - -/* include common defines/options for all 83xx Keymile boards */ -#include "km/km83xx-common.h" - -/* - * System IO Setup - */ -#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_CSB_TO_CLKIN_4X1 | \ - HRCWL_CORE_TO_CSB_2X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X6) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_EARLY | \ - HRCWH_LDP_CLEAR) - -/** - * DDR RAM settings - */ -#define CONFIG_SYS_DDR_SDRAM_CFG (\ - SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_SREN | \ - SDRAM_CFG_HSE) - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 - -#ifdef CONFIG_KMCOGE5NE -/** - * KMCOGE5NE has 512 MB RAM - */ -#define CONFIG_SYS_DDR_CS0_CONFIG (\ - CSCONFIG_EN | \ - CSCONFIG_AP | \ - CSCONFIG_ODT_RD_ONLY_CURRENT | \ - CSCONFIG_BANK_BIT_3 | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) -#else -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_ODT_RD_ONLY_CURRENT) -#endif - -#define CONFIG_SYS_DDR_CLK_CNTL (\ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CONFIG_SYS_DDR_INTERVAL (\ - (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x203 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f - -#define CONFIG_SYS_DDRCDR (\ - DDRCDR_EN | \ - DDRCDR_Q_DRN) -#define CONFIG_SYS_DDR_MODE 0x47860452 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 (\ - (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (3 << TIMING_CFG1_WRREC_SHIFT) | \ - (7 << TIMING_CFG1_REFREC_SHIFT) | \ - (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (3 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 (\ - (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 - -/* - * PAXE on the local bus CS3 - */ -#define CONFIG_SYS_PAXE_BASE 0xA0000000 -#define CONFIG_SYS_PAXE_SIZE 256 - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE - -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ - -#define CONFIG_SYS_BR3_PRELIM (\ - CONFIG_SYS_PAXE_BASE | \ - (1 << BR_PS_SHIFT) | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (\ - MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EAD) - -#ifdef CONFIG_KMCOGE5NE -/* - * BFTIC3 on the local bus CS4 - */ -#define CONFIG_SYS_BFTIC3_BASE 0xB0000000 -#define CONFIG_SYS_BFTIC3_SIZE 256 - -#define CONFIG_SYS_BR4_PRELIM (\ - CONFIG_SYS_BFTIC3_BASE |\ - (1 << BR_PS_SHIFT) | \ - BR_V) - -#define CONFIG_SYS_OR4_PRELIM (\ - MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 |\ - OR_GPCM_SCY_2 |\ - OR_GPCM_TRLX |\ - OR_GPCM_EAD) -#endif - -/* - * MMU Setup - */ - -/* PAXE: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (\ - CONFIG_SYS_PAXE_BASE | \ - BATL_PP_10 | \ - BATL_MEMCOHERENCE) - -#define CONFIG_SYS_IBAT5U (\ - CONFIG_SYS_PAXE_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) - -#define CONFIG_SYS_DBAT5L (\ - CONFIG_SYS_PAXE_BASE | \ - BATL_PP_10 | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - - -#ifdef CONFIG_KMCOGE5NE -/* BFTIC3: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT6L (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATL_PP_10 | \ - BATL_MEMCOHERENCE) - -#define CONFIG_SYS_IBAT6U (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) - -#define CONFIG_SYS_DBAT6L (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATL_PP_10 | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* DDR/LBC SDRAM next 256M: cacheable */ -#define CONFIG_SYS_IBAT7L (\ - CONFIG_SYS_SDRAM_BASE2 |\ - BATL_PP_10 |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_IBAT7U (\ - CONFIG_SYS_SDRAM_BASE2 |\ - BATU_BL_256M |\ - BATU_VS |\ - BATU_VP) -/* enable POST tests */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) -#define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ -#define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END -#define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ -#define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ -#define CONFIG_CMD_DIAG /* so that testpin is inquired for POST test */ - -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#endif - -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#endif /* CONFIG */ |