diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/ipam390.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/ipam390.h | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/qemu/roms/u-boot/include/configs/ipam390.h b/qemu/roms/u-boot/include/configs/ipam390.h deleted file mode 100644 index fdd568074..000000000 --- a/qemu/roms/u-boot/include/configs/ipam390.h +++ /dev/null @@ -1,339 +0,0 @@ -/* - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * Based on: - * U-Boot:include/configs/da850evm.h - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Board - */ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_BARIX_IPAM390 - -/* - * SoC Configuration - */ -#define CONFIG_MACH_DAVINCI_DA850_EVM -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ -#define CONFIG_SOC_DA850 /* TI DA850 SoC */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) -#define CONFIG_SYS_DA850_PLL_INIT -#define CONFIG_SYS_DA850_DDR_INIT -#define CONFIG_SYS_TEXT_BASE 0xc1080000 - -/* - * Memory Info - */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ -#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ -#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ -#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ - -/* memtest start addr */ -#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) - -/* memtest will be run on 16MB */ -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024) - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ - -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ - DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ - DAVINCI_SYSCFG_SUSPSRC_UART2 | \ - DAVINCI_SYSCFG_SUSPSRC_UART0 | \ - DAVINCI_SYSCFG_SUSPSRC_EMAC) - -/* - * PLL configuration - */ -#define CONFIG_SYS_DV_CLKMODE 0 -#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 -#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 -#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 -#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 - -#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 -#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 -#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 -#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 - -#define CONFIG_SYS_DA850_PLL0_PLLM 24 -#define CONFIG_SYS_DA850_PLL1_PLLM 24 - -/* - * DDR2 memory configuration - */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ - DV_DDR_PHY_EXT_STRBEN | \ - (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000498 - -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020 - - -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ - (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ - (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ - (2 << DV_DDR_SDTMR1_WR_SHIFT) | \ - (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ - (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ - (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ - (1 << DV_DDR_SDTMR1_WTR_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ - (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ - (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ - (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ - (14 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ - (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ - (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \ - (2 << DV_DDR_SDTMR2_CKE_SHIFT)) - -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ - (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ - (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \ - (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ - (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ - (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ - (2 << DV_DDR_SDCR_CL_SHIFT) | \ - (3 << DV_DDR_SDCR_IBANK_SHIFT) | \ - (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) - -#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(1) | \ - DAVINCI_ABCR_WSTROBE(2) | \ - DAVINCI_ABCR_WHOLD(0) | \ - DAVINCI_ABCR_RSETUP(1) | \ - DAVINCI_ABCR_RSTROBE(2) | \ - DAVINCI_ABCR_RHOLD(1) | \ - DAVINCI_ABCR_TA(0) | \ - DAVINCI_ABCR_ASIZE_8BIT) - - -/* - * Serial Driver info - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ -#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ - -/* - * Flash & Environment - */ -#define CONFIG_NAND_DAVINCI -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ -#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST -#define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_NAND_CS 3 -#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST -#define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x120000 -#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ - CONFIG_SYS_NAND_U_BOOT_SIZE - \ - CONFIG_SYS_MALLOC_LEN - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { \ - 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \ - 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \ - 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \ - 54, 55, 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 10 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_LOAD - -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* - * U-Boot general configuration - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC - -/* - * Linux Information - */ -#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 2 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "defbootargs=setenv bootargs mem=128M console=ttyS0,115200n8 " \ - "root=/dev/mtdblock5 rw noinitrd " \ - "rootfstype=jffs2 noinitrd\0" \ - "hwconfig=dsp:wake=yes\0" \ - "bootcmd=nboot kernel;run defbootargs addmtd;bootm 0xc0700000\0" \ - "bootfile=uImage\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtddevname=uboot-env\0" \ - "mtddevnum=0\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "u-boot=/tftpboot/ipam390/u-boot.ais\0" \ - "upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;" \ - "nand write c0000000 20000 ${filesize}\0" \ - "setbootparms=nand read c0100000 200000 400000;" \ - "run defbootargs addmtd;" \ - "spl export atags c0100000;" \ - "nand erase.part bootparms;" \ - "nand write c0000100 180000 20000\0" \ - "\0" - -/* - * U-Boot commands - */ -#include <config_cmd_default.h> -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY - -#ifdef CONFIG_CMD_BDI -#define CONFIG_CLOCKS -#endif - -#ifndef CONFIG_DRIVER_TI_EMAC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_DHCP -#undef CONFIG_CMD_MII -#undef CONFIG_CMD_PING -#endif - -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_TRIMFFS - -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_LZO -#define CONFIG_RBTREE -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -#define MTDIDS_NAME_STR "davinci_nand.0" -#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR -#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ - "128k(u-boot-env)," \ - "1408k(u-boot)," \ - "128k(bootparms)," \ - "384k(factory-info)," \ - "4M(kernel)," \ - "-(rootfs)" - -/* defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_BOARD_INIT -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ - CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" -#define CONFIG_SPL_STACK 0x8001ff00 -#define CONFIG_SPL_TEXT_BASE 0x80000000 -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_MAX_FOOTPRINT 32768 - -/* additions for new relocation code, must added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0xc0000000 - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) - -/* add FALCON boot mode */ -#define CONFIG_CMD_SPL -#define CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 -#define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR -#define CONFIG_CMD_SPL_NAND_OFS 0x00180000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 - -/* GPIO support */ -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_DA8XX_GPIO -#define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14) - -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_IPAM390_GPIO_LED_RED ((16 * 7) + 11) -#define CONFIG_IPAM390_GPIO_LED_GREEN ((16 * 7) + 12) - -#endif /* __CONFIG_H */ |