1 files changed, 103 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/highbank.h b/qemu/roms/u-boot/include/configs/highbank.h
new file mode 100644
index 000000000..a6202cfab
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/highbank.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config_distro_defaults.h>
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_THUMB_BUILD
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_FIT
+#define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
+
+#define CONFIG_SYS_TIMER_RATE		(150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER	(0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
+
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		150000000
+#define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
+#define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
+#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_CALXEDA_XGMAC
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_SCSI
+
+#define CONFIG_BOOT_RETRY_TIME		-1
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds...\nPress <s> to stop or <d> to delay\n", bootdelay
+#define CONFIG_AUTOBOOT_KEYED_CTRLC
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					 sizeof(CONFIG_SYS_PROMPT)+16)
+
+#define CONFIG_SYS_LOAD_ADDR		0x800000
+#define CONFIG_SYS_64BIT_LBA
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1_SIZE		(4089 << 20)
+#define CONFIG_SYS_MEMTEST_START	0x100000
+#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)
+
+/* Environment data setup
+*/
+#define CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfff88000	/* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE		0x8000		/* NVRAM size */
+#define CONFIG_ENV_SIZE			0x2000		/* Size of Environ */
+#define CONFIG_ENV_ADDR			CONFIG_SYS_NVRAM_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_TEXT_BASE		0x00008000
+#define CONFIG_SYS_INIT_SP_ADDR		0x01000000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#endif