diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/gplugd.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/gplugd.h | 134 |
1 files changed, 0 insertions, 134 deletions
diff --git a/qemu/roms/u-boot/include/configs/gplugd.h b/qemu/roms/u-boot/include/configs/gplugd.h deleted file mode 100644 index 404c56af1..000000000 --- a/qemu/roms/u-boot/include/configs/gplugd.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2011 - * eInfochips Ltd. <www.einfochips.com> - * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com> - * - * Based on Aspenite: - * (C) Copyright 2010 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * Contributor: Mahavir Jain <mjain@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_GPLUGD_H -#define __CONFIG_GPLUGD_H - -/* - * FIXME: fix for error caused due to recent update to mach-types.h - */ -#include <asm/mach-types.h> -#ifdef MACH_TYPE_SHEEVAD -#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." -#else -#define MACH_TYPE_SHEEVAD 2625 -#endif - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-gplugD" - -/* - * High Level Configuration Options - */ -#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ -#define CONFIG_ARMADA100 1 /* SOC Family Name */ -#define CONFIG_ARMADA168 1 /* SOC Used on this Board */ -#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -#define CONFIG_SYS_TEXT_BASE 0x00f00000 - -/* - * There is no internal RAM in ARMADA100, using DRAM - * TBD: dcache to be used for this - */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -#define CONFIG_NR_DRAM_BANKS_MAX 2 - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include <config_cmd_default.h> -#define CONFIG_CMD_I2C -#undef CONFIG_CMD_FPGA -#define CONFIG_CMD_USB -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* Disable DCACHE */ -#define CONFIG_SYS_DCACHE_OFF - -/* Network configuration */ -#ifdef CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_ARMADA100_FEC - -/* DHCP Support */ -#define CONFIG_CMD_DHCP -#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000 -#endif /* CONFIG_CMD_NET */ - -/* GPIO Support */ -#define CONFIG_MARVELL_GPIO - -/* PHY configuration */ -#define CONFIG_MII -#define CONFIG_CMD_MII -#define CONFIG_RESET_PHY_R -/* 88E3015 register definition */ -#define PHY_LED_PAR_SEL_REG 22 -#define PHY_LED_MAN_REG 25 -#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */ -/* GPIO Configuration for PHY */ -#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */ - -/* SPI Support */ -#define CONFIG_ARMADA100_SPI -#define CONFIG_ENV_SPI_CS 110 -#define CONFIG_SYS_SSP_PORT 2 - -/* Flash Support */ -#define CONFIG_CMD_SF -#define CONFIG_SPI_FLASH_ATMEL - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" -#undef CONFIG_ARCH_MISC_INIT - -#ifdef CONFIG_SYS_NS16550_COM1 -#undef CONFIG_SYS_NS16550_COM1 -#endif /* CONFIG_SYS_NS16550_COM1 */ - -#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SECT_SIZE 0x4000 -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_OFFSET 0x07C000 - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_SAVEENV - -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_ARMADA100 -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#endif /* CONFIG_CMD_USB */ - -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SUPPORT_VFAT - -#endif /* __CONFIG_GPLUGD_H */ |