diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/goflexhome.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/goflexhome.h | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/qemu/roms/u-boot/include/configs/goflexhome.h b/qemu/roms/u-boot/include/configs/goflexhome.h deleted file mode 100644 index 30a5859c5..000000000 --- a/qemu/roms/u-boot/include/configs/goflexhome.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> - * - * Based on dockstar.h originally written by - * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> - * - * Based on sheevaplug.h originally written by - * Prafulla Wadaskar <prafulla@marvell.com> - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_GOFLEXHOME_H -#define _CONFIG_GOFLEXHOME_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_GOFLEXHOME /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Default GPIO configuration and LED status - */ -#define GOFLEXHOME_OE_LOW (~(0)) -#define GOFLEXHOME_OE_HIGH (~(0)) -#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ -#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -#include <config_cmd_default.h> -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EXT4 -#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ -#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0xC0000 -#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" - -#define CONFIG_MTDPARTS \ - "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "console=console=ttyS0,115200\0" \ - "mtdids=nand0=orion_nand\0" \ - "mtdparts="CONFIG_MTDPARTS \ - "kernel=/boot/uImage\0" \ - "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ - -/* - * * SATA Driver configuration - * */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -/* - * * RTC driver configuration - * */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - -#endif /* _CONFIG_GOFLEXHOME_H */ |