diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/eb_cpu5282.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/eb_cpu5282.h | 293 |
1 files changed, 293 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/eb_cpu5282.h b/qemu/roms/u-boot/include/configs/eb_cpu5282.h new file mode 100644 index 000000000..bdca70587 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/eb_cpu5282.h @@ -0,0 +1,293 @@ +/* + * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123) + * + * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_EB_CPU5282_H_ +#define _CONFIG_EB_CPU5282_H_ + +#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP + +/*----------------------------------------------------------------------* + * High Level Configuration Options (easy to change) * + *----------------------------------------------------------------------*/ + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ + +#define CONFIG_BOOTCOMMAND "printenv" + +/*----------------------------------------------------------------------* + * Options * + *----------------------------------------------------------------------*/ + +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_RESET_TO_RETRY +#define CONFIG_SPLASH_SCREEN + +#define CONFIG_HW_WATCHDOG + +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_ACTIVE 0 +#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */ +#define STATUS_LED_BOOT 0 +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_STATE STATUS_LED_OFF + +/*----------------------------------------------------------------------* + * Configuration for environment * + * Environment is in the second sector of the first 256k of flash * + *----------------------------------------------------------------------*/ + +#define CONFIG_ENV_ADDR 0xFF040000 +#define CONFIG_ENV_SECT_SIZE 0x00020000 +#define CONFIG_ENV_IS_IN_FLASH 1 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#define CONFIG_CMDLINE_EDITING +#include <config_cmd_default.h> + +#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_LED +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFTMR + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_SYS_PROMPT "\nEB+CPU5282> " +#define CONFIG_SYS_LONGHELP 1 + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR 0x20000 + +#define CONFIG_SYS_MEMTEST_START 0x100000 +#define CONFIG_SYS_MEMTEST_END 0x400000 +/*#define CONFIG_SYS_DRAM_TEST 1 */ +#undef CONFIG_SYS_DRAM_TEST + +/*----------------------------------------------------------------------* + * Clock and PLL Configuration * + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ + +/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ + +#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ + +/*----------------------------------------------------------------------* + * Network * + *----------------------------------------------------------------------*/ + +#define CONFIG_MCFFEC +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 8 +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define MCFFEC_TOUT_LOOP 50000 + +#define CONFIG_OVERWRITE_ETHADDR_ONCE + +/*------------------------------------------------------------------------- + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_MBAR 0x40000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE0 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */ + +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 + +#define CONFIG_SYS_MONITOR_LEN 0x20000 +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CONFIG_FLASH_SHOW_PROGRESS 45 + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 +#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 + +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 +#define CONFIG_SYS_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_SIZE 16*1024*1024 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_CACHELINE_SIZE 16 + +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ + CF_CACR_CEIB | CF_CACR_DBWE | \ + CF_CACR_EUSP) + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +#define CONFIG_SYS_CS0_BASE 0xFF000000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS0_MASK 0x00FF0001 + +#define CONFIG_SYS_CS2_BASE 0xE0000000 +#define CONFIG_SYS_CS2_CTRL 0x00001980 +#define CONFIG_SYS_CS2_MASK 0x000F0001 + +#define CONFIG_SYS_CS3_BASE 0xE0100000 +#define CONFIG_SYS_CS3_CTRL 0x00001980 +#define CONFIG_SYS_CS3_MASK 0x000F0001 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CONFIG_SYS_PADDR 0x0000000 +#define CONFIG_SYS_PADAT 0x0000000 + +#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CONFIG_SYS_PBDDR 0x0000000 +#define CONFIG_SYS_PBDAT 0x0000000 + +#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 + +#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 + +#define CONFIG_SYS_PASPAR 0x0F0F +#define CONFIG_SYS_PEHLPAR 0xC0 +#define CONFIG_SYS_PUAPAR 0x0F +#define CONFIG_SYS_DDRUA 0x05 +#define CONFIG_SYS_PJPAR 0xFF + +/*----------------------------------------------------------------------- + * I2C + */ + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL + +#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +#define CONFIG_SYS_FSL_I2C_SPEED 100000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0 + +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_DS1338 +#define CONFIG_I2C_RTC_ADDR 0x68 +#endif + +/*----------------------------------------------------------------------- + * VIDEO configuration + */ + +#define CONFIG_VIDEO + +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_VCXK 1 + +#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2 +#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1 +#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE + +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001 + +#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002 + +#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004 + +#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE +#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE +#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2 + +#endif /* CONFIG_VIDEO */ +#endif /* _CONFIG_M5282EVB_H */ +/*---------------------------------------------------------------------*/ |