diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/dns325.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/dns325.h | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/qemu/roms/u-boot/include/configs/dns325.h b/qemu/roms/u-boot/include/configs/dns325.h deleted file mode 100644 index 96db44f51..000000000 --- a/qemu/roms/u-boot/include/configs/dns325.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2011 - * Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> - * - * Based on Kirkwood support: - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_DNS325_H -#define _CONFIG_DNS325_H - -/* - * Machine number definition - */ -#define MACH_TYPE_DNS325 3800 -#define CONFIG_MACH_TYPE MACH_TYPE_DNS325 -#define CONFIG_IDENT_STRING "\nD-Link DNS-325" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include <config_cmd_default.h> -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE -#define CONFIG_CMD_DATE -#define CONFIG_SYS_MVFS - -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* Remove or override few declarations from mv-common.h */ -#undef CONFIG_SYS_PROMPT - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_NETCONSOLE -#endif - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif - -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif - -/* - * Enable GPI0 support - */ -#define CONFIG_KIRKWOOD_GPIO - -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Console configuration - */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* - * Enable device tree support - */ -#define CONFIG_OF_LIBFDT - -/* - * Display cpu info at boot - */ -#define CONFIG_DISPLAY_CPUINFO - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ -#define CONFIG_ENV_ADDR 0xe0000 -#define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ - -/* - * Default environment variables - */ -#define MTDIDS_DEFAULT "nand0=orion_nand" - -#define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \ - "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "loadaddr=0x800000\0" \ - "autoload=no\0" \ - "console=ttyS0,115200\0" \ - "mtdparts="MTDPARTS_DEFAULT \ - "optargs=\0" \ - "bootenv=uEnv.txt\0" \ - "importbootenv=echo Importing environment ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ - "setbootargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "${mtdparts} " \ - "root=${bootenvroot} " \ - "rootfstype=${bootenvrootfstype}\0" \ - "subbootcmd=run setbootargs; " \ - "if run bootenvloadimage; then " \ - "bootm ${loadaddr};" \ - "fi;\0" \ - "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ - "nandrootfstype=ubifs\0" \ - "nandloadimage=nand read ${loadaddr} kernel\0" \ - "setnandbootenv=echo Booting from nand ...; " \ - "setenv bootenvroot ${nandroot}; " \ - "setenv bootenvrootfstype ${nandrootfstype}; " \ - "setenv bootenvloadimage ${nandloadimage}\0" - -#define CONFIG_BOOTCOMMAND \ - "if test -n ${bootenv} && usb start; then " \ - "if run loadbootenv; then " \ - "echo Loaded environment ${bootenv} from usb;" \ - "run importbootenv;" \ - "fi;" \ - "if test -n ${bootenvcmd}; then " \ - "echo Running bootenvcmd ...;" \ - "run bootenvcmd;" \ - "fi;" \ - "fi;" \ - "run setnandbootenv subbootcmd;" - -#endif /* _CONFIG_DNS325_H */ |