diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/cpu9260.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/cpu9260.h | 498 |
1 files changed, 498 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/cpu9260.h b/qemu/roms/u-boot/include/configs/cpu9260.h new file mode 100644 index 000000000..39f706238 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/cpu9260.h @@ -0,0 +1,498 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * Ilko Iliev <www.ronetix.at> + * + * (C) Copyright 2009 + * Eric Benard <eric@eukrea.com> + * + * Configuration settings for the Eukrea CPU9260 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* to be removed once maemory-map.h is fixed */ +#define AT91_BASE_SYS 0xffffe800 +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) + +#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 + +#if defined(CONFIG_CPU9G20) +#define CONFIG_AT91SAM9G20 +#elif defined(CONFIG_CPU9260) +#define CONFIG_AT91SAM9260 +#else +#error "Unknown board" +#endif + +#include <asm/arch/hardware.h> + +#define CONFIG_AT91FAMILY +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x23f00000 +#else +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#endif + +/* clocks */ +#if defined(CONFIG_CPU9G20) +#define MASTER_PLL_DIV 0x01 +#define MASTER_PLL_MUL 0x2B +#elif defined(CONFIG_CPU9260) +#define MASTER_PLL_DIV 0x09 +#define MASTER_PLL_MUL 0x61 +#endif + +/* CKGR_MOR - enable main osc. */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOSCEN | \ + (255 << 8)) /* Main Oscillator Start-up Time */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_OUT | \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_6 | \ + AT91_PMC_PDIV_2) +#define CONFIG_SYS_MCKR2_VAL \ + CONFIG_SYS_MCKR1_VAL +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_SLOW | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#endif + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 + +/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A | \ + AT91_MATRIX_CSA_EBI_CS3A | AT91_MATRIX_CSA_VDDIOMSEL_3_3V) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x287 +/* SDRAMC_CR - Configuration register*/ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ +#endif + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_PULSE_NWE(8) | AT91_SMC_PULSE_NCS_WR(8) | \ + AT91_SMC_PULSE_NRD(14) | AT91_SMC_PULSE_NCS_RD(14)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(14)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(3)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | \ + AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_PULSE_NWE(6) | AT91_SMC_PULSE_NCS_WR(6) | \ + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(10)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(10)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ + AT91_SMC_MODE_DBW_16 | \ + AT91_SMC_MODE_TDF | \ + AT91_SMC_MODE_TDF_CYCLE(2)) +#endif + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_CR_PROCRST | \ + AT91_RSTC_MR_ERSTL(1) | \ + AT91_RSTC_MR_ERSTL(2)) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ + AT91_WDT_MR_WDV(0xfff) | \ + AT91_WDT_MR_WDDIS | \ + AT91_WDT_MR_WDD(0xfff)) + +/* + * Hardware drivers + */ +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_AT91_GPIO +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MII + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) +#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB +#else +#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB +#endif + +/* NAND flash */ +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13) +#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) + +/* NOR flash */ +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_NO_FLASH +#else +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_2 0x12000000 +#define CONFIG_SYS_FLASH_BANKS_LIST \ + { PHYS_FLASH_1, PHYS_FLASH_2 } +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT (255+4) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#endif + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_AT91_WANTS_COMMON_PHY + +/* LEDS */ +/* Status LED */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_RED 0 +#define STATUS_LED_GREEN 1 +#define STATUS_LED_YELLOW 2 +#define STATUS_LED_BLUE 3 +/* Red */ +#define STATUS_LED_BIT STATUS_LED_RED +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Green */ +#define STATUS_LED_BIT1 STATUS_LED_GREEN +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Yellow */ +#define STATUS_LED_BIT2 STATUS_LED_YELLOW +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) +/* Blue */ +#define STATUS_LED_BIT3 STATUS_LED_BLUE +#define STATUS_LED_STATE3 STATUS_LED_ON +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT + +#define CONFIG_RED_LED AT91_PIO_PORTC, 11 +#define CONFIG_GREEN_LED AT91_PIO_PORTC, 12 +#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 7 +#define CONFIG_BLUE_LED AT91_PIO_PORTC, 9 + +/* USB */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB +#define CONFIG_USB_OHCI_NEW +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#endif +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END \ + (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024) + +#if defined(CONFIG_NANDBOOT) +#define CONFIG_SYS_USE_NANDFLASH +#undef CONFIG_SYS_USE_FLASH +#else +#define CONFIG_SYS_USE_FLASH +#undef CONFIG_SYS_USE_NANDFLASH +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_BASEDIR "cpu9G20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_BASEDIR "cpu9260" +#endif + +#if defined(CONFIG_SYS_USE_FLASH) +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "1792k(kernel)," \ + "-(rootfs);" \ + "atmel_nand:-(nand)" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs;bootm 0x10060000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \ + "off 0x10000000 0x1003ffff;erase 0x10000000 " \ + "0x1003ffff;cp.b 0x24000000 0x10000000 " \ + "$(filesize)\0" \ + "updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \ + " 0x10060000 0x1021ffff;erase 0x10060000 " \ + "0x1021ffff;cp.b 0x24000000 0x10060000 " \ + "$(filesize)\0" \ + "updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \ + "protect off 0x10220000 0x13ffffff;erase " \ + "0x10220000 0x13ffffff;cp.b 0x24000000 " \ + "0x10220000 $(filesize)\0" \ + "" +#elif defined(CONFIG_NANDBOOT) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:" \ + "128k(bootstrap)ro," \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "128k(u-boot-env2)ro," \ + "2M(kernel)," \ + "-(rootfs)" + +#define CONFIG_BOOTARGS "root=ubi0:eukrea-cpu9260-rootfs " \ + "ubi.mtd=5 rootfstype=ubifs at91sam9_wdt.heartbeat=60" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,5\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 $(basedir)/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs; nand read 0x22000000 0xA0000 " \ + "0x200000; bootm 0x22000000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "u-boot=u-boot-eukrea-cpu9260.bin\0" \ + "kernel=uImage-eukrea-cpu9260.bin\0" \ + "rootfs=image-eukrea-cpu9260.ubi\0" \ + "updtub=tftp ${loadaddr} $(basedir)/${u-boot}; " \ + "nand erase 20000 40000; " \ + "nand write ${loadaddr} 20000 40000\0" \ + "updtui=tftp ${loadaddr} $(basedir)/${kernel}; " \ + "nand erase a0000 200000; " \ + "nand write ${loadaddr} a0000 200000\0" \ + "updtrfs=tftp ${loadaddr} $(basedir)/${rootfs}; " \ + "nand erase 2a0000 fd60000; " \ + "nand write ${loadaddr} 2a0000 ${filesize}\0" +#endif + +#define CONFIG_BAUDRATE 115200 + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PROMPT "CPU9G20=> " +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PROMPT "CPU9260=> " +#endif +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SILENT_CONSOLE +#define CONFIG_NETCONSOLE + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ + GENERATED_GBL_DATA_SIZE) + +#endif |