diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/axs101.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/axs101.h | 181 |
1 files changed, 0 insertions, 181 deletions
diff --git a/qemu/roms/u-boot/include/configs/axs101.h b/qemu/roms/u-boot/include/configs/axs101.h deleted file mode 100644 index c22d6d0c7..000000000 --- a/qemu/roms/u-boot/include/configs/axs101.h +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_AXS101_H_ -#define _CONFIG_AXS101_H_ - -/* - * CPU configuration - */ -#define CONFIG_ARC700 -#define CONFIG_ARC_MMU_VER 3 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#define CONFIG_SYS_CLK_FREQ 750000000 -#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ - -/* NAND controller DMA doesn't work correctly with D$ enabled */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Board configuration - */ -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ - -#define CONFIG_ARCH_EARLY_INIT_R - -#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 -#define ARC_APB_PERIPHERAL_BASE 0xF0000000 -#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) -#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000) - -/* - * Memory configuration - */ -#define CONFIG_SYS_TEXT_BASE 0x81000000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_SIZE 0x20000000 /* 512 Mb */ - -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ -#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - -/* - * NAND Flash configuration - */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000) -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * UART configuration - * - * CONFIG_CONS_INDEX = 1 - Debug UART - * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB - */ -#define CONFIG_CONS_INDEX 4 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#if (CONFIG_CONS_INDEX == 1) - /* Debug UART */ -# define CONFIG_SYS_NS16550_CLK 33333000 -#else - /* FPGA UARTs use different clock */ -# define CONFIG_SYS_NS16550_CLK 33333333 -#endif -#define CONFIG_SYS_NS16550_COM1 (ARC_APB_PERIPHERAL_BASE + 0x5000) -#define CONFIG_SYS_NS16550_COM2 (ARC_FPGA_PERIPHERAL_BASE + 0x20000) -#define CONFIG_SYS_NS16550_COM3 (ARC_FPGA_PERIPHERAL_BASE + 0x21000) -#define CONFIG_SYS_NS16550_COM4 (ARC_FPGA_PERIPHERAL_BASE + 0x22000) -#define CONFIG_SYS_NS16550_MEM32 - -#define CONFIG_BAUDRATE 115200 -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CONFIG_DW_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_ENV_EEPROM_BUS 2 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0 -#define CONFIG_SYS_I2C_BASE 0xE001D000 -#define CONFIG_SYS_I2C_BASE1 0xE001E000 -#define CONFIG_SYS_I2C_BASE2 0xE001F000 -#define CONFIG_SYS_I2C_BUS_MAX 3 -#define IC_CLK 50 - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 64 - -/* - * SD/MMC configuration - */ -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DWMMC -#define CONFIG_DOS_PARTITION - -/* - * Ethernet PHY configuration - */ -#define CONFIG_PHYLIB -#define CONFIG_MII -#define CONFIG_PHY_GIGE - -/* - * Ethernet configuration - */ -#define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_AUTONEG -#define CONFIG_DW_SEARCH_PHY -#define CONFIG_NET_MULTI - -/* - * Command line configuration - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MMC -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_RARP - -#define CONFIG_OF_LIBFDT - -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_MAXARGS 16 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_EEPROM -#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ -#define CONFIG_ENV_OFFSET 0 - -/* - * Environment configuration - */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTARGS "console=ttyS3,115200n8" -#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR - -/* - * Console configuration - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "AXS# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* - * Misc utility configuration - */ -#define CONFIG_BOUNCE_BUFFER - -#endif /* _CONFIG_AXS101_H_ */ |