diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/at91sam9260ek.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/at91sam9260ek.h | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/qemu/roms/u-boot/include/configs/at91sam9260ek.h b/qemu/roms/u-boot/include/configs/at91sam9260ek.h deleted file mode 100644 index 73917b0ec..000000000 --- a/qemu/roms/u-boot/include/configs/at91sam9260ek.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires - * adapting the initial boot program. - * Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x21f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ - -/* Define actual evaluation board type from used processor type */ -#ifdef CONFIG_AT91SAM9G20 -# define CONFIG_AT91SAM9G20EK /* It's an Atmel AT91SAM9G20 EK */ -#else -# define CONFIG_AT91SAM9260EK /* It's an Atmel AT91SAM9260 EK */ -#endif - -/* Misc CPU related */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -/* LED */ -#define CONFIG_AT91_LED -#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */ -#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */ - -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -#define CONFIG_CMD_PING 1 -#define CONFIG_CMD_DHCP 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB 1 - -/* - * SDRAM: 1 bank, min 32, max 128 MB - * Initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -#ifdef CONFIG_AT91SAM9XE -# define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) -#else -# define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) -#endif - -/* - * The (arm)linux board id set by generic code depending on configured board - * (see boards.cfg for different boards) - */ -#ifdef CONFIG_AT91SAM9G20 - /* the sam9g20 variants have two different board ids */ -# ifdef CONFIG_AT91SAM9G20EK_2MMC - /* we may be setup for the 2MMC variant of at91sam9g20ek */ -# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC -# else - /* or the normal at91sam9g20ek */ -# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK -# endif -#else - /* otherwise default to good old at91sam9260ek */ -# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK -#endif - -/* DataFlash */ -#ifndef CONFIG_AT91SAM9G20EK_2MMC -#define CONFIG_ATMEL_DATAFLASH_SPI -#define CONFIG_HAS_DATAFLASH 1 -#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) -#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2 -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ -#define AT91_SPI_CLK 15000000 -#endif - -#ifdef CONFIG_AT91SAM9G20EK -#define DATAFLASH_TCSS (0x22 << 16) -#else -#define DATAFLASH_TCSS (0x1a << 16) -#endif -#define DATAFLASH_TCHS (0x1 << 24) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#endif - -/* MMC */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#endif - -/* FAT */ -#ifdef CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* NOR flash - no real flash on this board */ -#define CONFIG_SYS_NO_FLASH 1 - -/* Ethernet */ -#define CONFIG_MACB 1 -#define CONFIG_RMII 1 -#define CONFIG_NET_RETRY_COUNT 20 -#define CONFIG_RESET_PHY_R 1 -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE 1 - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x23e00000 - -#ifdef CONFIG_SYS_USE_DATAFLASH_CS0 - -/* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xC0084000 0x22000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" - -#elif CONFIG_SYS_USE_DATAFLASH_CS1 - -/* bootstrap + u-boot + env + linux in dataflash on CS1 */ -#define CONFIG_ENV_IS_IN_DATAFLASH 1 -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) -#define CONFIG_ENV_OFFSET 0x4200 -#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x4200 -#define CONFIG_BOOTCOMMAND "cp.b 0xD0084000 0x22000000 0x210000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock0 " \ - "mtdparts=atmel_nand:-(root) " \ - "rw rootfstype=jffs2" - -#elif defined(CONFIG_SYS_USE_NANDFLASH) - -/* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock7 rw rootfstype=jffs2" - -#else /* CONFIG_SYS_USE_MMC */ -/* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ -#define CONFIG_ENV_OFFSET 0x2000 -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_SYS_MMC_ENV_DEV 0 - -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x22000000 uImage; bootm" -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256k(env),256k(env_redundant),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" -#endif - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) - -#endif |