diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/apf27.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/apf27.h | 384 |
1 files changed, 0 insertions, 384 deletions
diff --git a/qemu/roms/u-boot/include/configs/apf27.h b/qemu/roms/u-boot/include/configs/apf27.h deleted file mode 100644 index b10c48c20..000000000 --- a/qemu/roms/u-boot/include/configs/apf27.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * - * Configuration settings for the Armadeus Project motherboard APF27 - * - * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_ENV_VERSION 10 -#define CONFIG_IDENT_STRING " apf27 patch 3.10" -#define CONFIG_BOARD_NAME apf27 - -/* - * SoC configurations - */ -#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */ -#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */ -#define CONFIG_MACH_TYPE 1698 /* APF27 */ -#define CONFIG_SYS_GENERIC_BOARD - -/* - * Enable the call to miscellaneous platform dependent initialization. - */ -#define CONFIG_SYS_NO_FLASH /* to be define before <config_cmd_default.h> */ - -/* - * Board display option - */ -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_DISPLAY_CPUINFO - -/* - * SPL - */ -#define CONFIG_SPL -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" -#define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_TEXT_BASE 0xA0000000 - -/* NAND boot config */ -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_SIZE CONFIG_SYS_MONITOR_LEN - 0x800 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 - -#define CONFIG_HOSTNAME CONFIG_BOARD_NAME -#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" - -/* - * U-Boot Commands - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV /* ask for env variable */ -#define CONFIG_CMD_BSP /* Board Specific functions */ -#define CONFIG_CMD_CACHE /* icache, dcache */ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP /* DHCP Support */ -#define CONFIG_CMD_DNS -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_IMX_FUSE /* imx iim fuse */ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII /* MII support */ -#define CONFIG_CMD_MMC -#define CONFIG_CMD_MTDPARTS /* MTD partition support */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_NAND_LOCK_UNLOCK -#define CONFIG_CMD_NAND_TRIMFFS -#define CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_PING /* ping support */ -#define CONFIG_CMD_SETEXPR /* setexpr support */ -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -/* - * Memory configurations - */ -#define CONFIG_NR_DRAM_POPULATED 1 -#define CONFIG_NR_DRAM_BANKS 2 - -#define ACFG_SDRAM_MBYTE_SYZE 64 - -#define PHYS_SDRAM_1 0xA0000000 -#define PHYS_SDRAM_2 0xB0000000 -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (512<<10)) -#define CONFIG_SYS_MEMTEST_START 0xA0000000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0xA0300000 /* 3 MiB RAM test */ - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE \ - + PHYS_SDRAM_1_SIZE - 0x0100000) - -#define CONFIG_SYS_TEXT_BASE 0xA0000800 - -/* - * FLASH organization - */ -#define ACFG_MONITOR_OFFSET 0x00000000 -#define CONFIG_SYS_MONITOR_LEN 0x00100000 /* 1MiB */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_OFFSET 0x00100000 /* NAND offset */ -#define CONFIG_ENV_SIZE 0x00020000 /* 128kB */ -#define CONFIG_ENV_RANGE 0X00080000 /* 512kB */ -#define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) /* +512kB */ -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* 512kB */ -#define CONFIG_FIRMWARE_OFFSET 0x00200000 -#define CONFIG_FIRMWARE_SIZE 0x00080000 /* 512kB */ -#define CONFIG_KERNEL_OFFSET 0x00300000 -#define CONFIG_ROOTFS_OFFSET 0x00800000 - -#define CONFIG_MTDMAP "mxc_nand.0" -#define MTDIDS_DEFAULT "nand0=" CONFIG_MTDMAP -#define MTDPARTS_DEFAULT "mtdparts=" CONFIG_MTDMAP \ - ":1M(u-boot)ro," \ - "512K(env)," \ - "512K(env2)," \ - "512K(firmware)," \ - "512K(dtb)," \ - "5M(kernel)," \ - "-(rootfs)" - -/* - * U-Boot general configurations - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "BIOS> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 2048 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot argument buffer size */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_HUSH_PARSER /* enable the "hush" shell */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* secondary prompt string */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_PREBOOT "run check_flash check_env;" - - -/* - * Boot Linux - */ -#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG /* send initrd params */ - -#define CONFIG_OF_LIBFDT - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_BOOTFILE __stringify(CONFIG_BOARD_NAME) "-linux.bin" -#define CONFIG_BOOTARGS "console=" __stringify(ACFG_CONSOLE_DEV) "," \ - __stringify(CONFIG_BAUDRATE) " " MTDPARTS_DEFAULT \ - " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs " - -#define ACFG_CONSOLE_DEV ttySMX0 -#define CONFIG_BOOTCOMMAND "run ubifsboot" -#define CONFIG_SYS_AUTOLOAD "no" -/* - * Default load address for user programs and kernel - */ -#define CONFIG_LOADADDR 0xA0000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* - * Extra Environments - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ - "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "partition=nand0,6\0" \ - "u-boot_addr=" __stringify(ACFG_MONITOR_OFFSET) "\0" \ - "env_addr=" __stringify(CONFIG_ENV_OFFSET) "\0" \ - "firmware_addr=" __stringify(CONFIG_FIRMWARE_OFFSET) "\0" \ - "firmware_size=" __stringify(CONFIG_FIRMWARE_SIZE) "\0" \ - "kernel_addr=" __stringify(CONFIG_KERNEL_OFFSET) "\0" \ - "rootfs_addr=" __stringify(CONFIG_ROOTFS_OFFSET) "\0" \ - "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \ - "kernel_addr_r=A0000000\0" \ - "check_env=if test -n ${flash_env_version}; " \ - "then env default env_version; " \ - "else env set flash_env_version ${env_version}; env save; "\ - "fi; " \ - "if itest ${flash_env_version} < ${env_version}; then " \ - "echo \"*** Warning - Environment version" \ - " change suggests: run flash_reset_env; reset\"; "\ - "env default flash_reset_env; "\ - "fi; \0" \ - "check_flash=nand lock; nand unlock ${env_addr}; \0" \ - "flash_reset_env=env default -f -a; saveenv; run update_env;" \ - "echo Flash environment variables erased!\0" \ - "download_uboot=tftpboot ${loadaddr} ${board_name}" \ - "-u-boot-with-spl.bin\0" \ - "flash_uboot=nand unlock ${u-boot_addr} ;" \ - "nand erase.part u-boot;" \ - "if nand write.trimffs ${fileaddr} ${u-boot_addr} ${filesize};"\ - "then nand lock; nand unlock ${env_addr};" \ - "echo Flashing of uboot succeed;" \ - "else echo Flashing of uboot failed;" \ - "fi; \0" \ - "update_uboot=run download_uboot flash_uboot\0" \ - "download_env=tftpboot ${loadaddr} ${board_name}" \ - "-u-boot-env.txt\0" \ - "flash_env=env import -t ${loadaddr}; env save; \0" \ - "update_env=run download_env flash_env\0" \ - "update_all=run update_env update_uboot\0" \ - "unlock_regs=mw 10000008 0; mw 10020008 0\0" \ - -/* - * Serial Driver - */ -#define CONFIG_MXC_UART -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* - * GPIO - */ -#define CONFIG_MXC_GPIO - -/* - * NOR - */ - -/* - * NAND - */ -#define CONFIG_NAND_MXC - -#define CONFIG_MXC_NAND_REGS_BASE 0xD8000000 -#define CONFIG_SYS_NAND_BASE CONFIG_MXC_NAND_REGS_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define CONFIG_MXC_NAND_HWECC -#define CONFIG_SYS_NAND_LARGEPAGE -#define CONFIG_SYS_NAND_BUSWIDTH_16BIT -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_PAGE_COUNT CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE -#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 11 -#define NAND_MAX_CHIPS 1 - -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_NAND_QUIET 1 - -/* - * Partitions & Filsystems - */ -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT - -/* - * UBIFS - */ -#define CONFIG_RBTREE -#define CONFIG_LZO - -/* - * Ethernet (on SOC imx FEC) - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x1f -#define CONFIG_MII /* MII PHY management */ - -/* - * FPGA - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_FPGA -#endif -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA_XILINX -#define CONFIG_FPGA_SPARTAN3 -#define CONFIG_SYS_FPGA_WAIT 250 /* 250 ms */ -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_CHECK_CTRLC -#define CONFIG_SYS_FPGA_CHECK_ERROR - -/* - * Fuses - IIM - */ -#ifdef CONFIG_CMD_IMX_FUSE -#define IIM_MAC_BANK 0 -#define IIM_MAC_ROW 5 -#define IIM0_SCC_KEY 11 -#define IIM1_SUID 1 -#endif - -/* - * I2C - */ - -#ifdef CONFIG_CMD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_MXC_I2C1_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_MXC_I2C1_SLAVE 0x7F -#define CONFIG_SYS_MXC_I2C2_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_MXC_I2C2_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES { } - -#ifdef CONFIG_CMD_EEPROM -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24LC02 */ -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* msec */ -#endif /* CONFIG_CMD_EEPROM */ -#endif /* CONFIG_CMD_I2C */ - -/* - * SD/MMC - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_MXC_MMC -#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 -#endif - -/* - * RTC - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1374 -#define CONFIG_SYS_RTC_BUS_NUM 0 -#endif /* CONFIG_CMD_DATE */ - -/* - * PLL - * - * 31 | x |x| x x x x |x x x x x x x x x x |x x|x x x x|x x x x x x x x x x| 0 - * |CPLM|X|----PD---|--------MFD---------|XXX|--MFI--|-----MFN-----------| - */ -#define CONFIG_MX27_CLK32 32768 /* 32768 or 32000 Hz crystal */ - -#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ -/* micron 64MB */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2_SIZE 0x04000000 /* 64 MB */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 128) -/* micron 128MB */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 256) -/* micron 256MB */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ -#define PHYS_SDRAM_2_SIZE 0x10000000 /* 256 MB */ -#endif - -#endif /* __CONFIG_H */ |