diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/adp-ag102.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/adp-ag102.h | 340 |
1 files changed, 0 insertions, 340 deletions
diff --git a/qemu/roms/u-boot/include/configs/adp-ag102.h b/qemu/roms/u-boot/include/configs/adp-ag102.h deleted file mode 100644 index 39f7a3cd4..000000000 --- a/qemu/roms/u-boot/include/configs/adp-ag102.h +++ /dev/null @@ -1,340 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <asm/arch/ag102.h> - -/* - * CPU and Board Configuration Options - */ -#define CONFIG_ADP_AG102 - -#define CONFIG_USE_INTERRUPT - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_MEM_REMAP -#endif - -#ifdef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x04200000 -#else -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#endif - -/* - * Timer - */ -#define CONFIG_SYS_CLK_FREQ (66000000 * 2) -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ - -/* - * Use Externel CLOCK or PCLK - */ -#undef CONFIG_FTRTC010_EXTCLK - -#ifndef CONFIG_FTRTC010_EXTCLK -#define CONFIG_FTRTC010_PCLK -#endif - -#ifdef CONFIG_FTRTC010_EXTCLK -#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ -#else -#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ -#endif - -#define TIMER_LOAD_VAL 0xffffffff - -/* - * Real Time Clock - */ -#define CONFIG_RTC_FTRTC010 - -/* - * Real Time Clock Divider - * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) - */ -#define OSC_5MHZ (5*1000000) -#define OSC_CLK (2*OSC_5MHZ) -#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) - -/* - * Serial console configuration - */ - -/* FTUART is a high speed NS 16C550A compatible UART */ -#define CONFIG_BAUDRATE 38400 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */ - -/* - * Ethernet - */ -#define CONFIG_NET_MULTI -#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */ -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_FTGMAC100 -#define CONFIG_FTGMAC100_EGIGA - -#define CONFIG_BOOTDELAY 3 - -/* - * SD (MMC) controller - */ -#define CONFIG_MMC -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_FTSDC010 -#define CONFIG_FTSDC010_NUMBER 1 -#define CONFIG_FTSDC010_SDIO -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_PING -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_ELF - -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS - -/* - * PCI - */ -#define CONFIG_PCI -#define CONFIG_FTPCI100 -#define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_FTPCI100_MEM_BASE 0xa0000000 -#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */ -#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */ -#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50 - -#define CONFIG_PCI_MEM_BUS 0xa0000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */ - -#define CONFIG_PCI_IO_BUS 0x90000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */ - -/* - * USB - */ -#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) -#if defined(CONFIG_FTPCI100) -#define __io /* enable outl & inl */ -#define CONFIG_CMD_USB -#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5 -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI -#define CONFIG_PCI_EHCI_DEVICE 0 -#define CONFIG_USB_EHCI_PCI -#define CONFIG_PREBOOT "usb start;" -#endif /* #if defiend(CONFIG_FTPCI100) */ -#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */ - -/* - * IDE/ATA stuff - */ -#define __io -#define CONFIG_IDE_AHB -#define CONFIG_IDE_FTIDE020 - -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#define CONFIG_IDE_RESET 1 /* reset for ide supported */ -#define CONFIG_IDE_PREINIT 1 /* preinit for ide */ - -/* max: 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */ -/* max: 2 drives per IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */ - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */ - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) - -/* - * AHB Controller configuration - */ -#define CONFIG_FTAHBC020S - -#ifdef CONFIG_FTAHBC020S -#include <faraday/ftahbc020s.h> - -/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ -#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 - -/* - * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, - * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote - * in C language. - */ -#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ - (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ - FTAHBC020S_SLAVE_BSR_SIZE(0xb)) -#endif - -/* - * Watchdog - */ -#define CONFIG_FTWDT010_WATCHDOG - -/* - * PCU Power Control Unit configuration - */ -#define CONFIG_ANDES_PCU - -#ifdef CONFIG_ANDES_PCU -#include <andestech/andes_pcu.h> - -#endif - -/* - * DDR DRAM controller configuration - */ -#define CONFIG_DWCDDR21MCTL - -#ifdef CONFIG_DWCDDR21MCTL -#include <synopsys/dwcddr21mctl.h> -/* DCR: - * 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend - * 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk - * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks) - * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank) - * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks) - */ -#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004 -#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \ - DWCDDR21MCTL_CCR_DFTLM(0x4) | \ - DWCDDR21MCTL_CCR_HOSTEN(0x1)) - -/* 0x04: 0x000020d4 */ -#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca - -/* 0x08: 0x0000000f */ -#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f - -/* 0x10: 0x00034812 */ -#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \ - DWCDDR21MCTL_DRR_TRFPRD(0x0348)) -/* 0x24 */ -#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0) - -/* 0x4c: 0x00000040 */ -#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040 - -/* 0x5c: 0x000055CF */ -#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf - -/* 0xa4: 0x00100000 */ -#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \ - DWCDDR21MCTL_DTAR_DTROW(0x0100) | \ - DWCDDR21MCTL_DTAR_DTCOL(0x0)) -/* 0x1f0: 0x00000852 */ -#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \ - DWCDDR21MCTL_MR_CL(0x5) | \ - DWCDDR21MCTL_MR_BL(0x2)) -#endif - -/* - * Physical Memory Map - */ -#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) -#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ -#if defined(CONFIG_MEM_REMAP) -#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/ -#endif -#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ -#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ -#endif - -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 - -#ifdef CONFIG_MEM_REMAP -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ - GENERATED_GBL_DATA_SIZE) -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ - GENERATED_GBL_DATA_SIZE) -#endif /* CONFIG_MEM_REMAP */ - -/* - * Load address and memory test area should agree with - * board/faraday/a320/config.mk - * Be careful not to overwrite U-boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x0CF00000 - -/* memtest works on 63 MB in DRAM */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) - -/* - * Static memory controller configuration - */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_NO_FLASH - -/* - * Env Storage Settings - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 4096 - -#endif /* __CONFIG_H */ |