diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/M54418TWR.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/M54418TWR.h | 427 |
1 files changed, 0 insertions, 427 deletions
diff --git a/qemu/roms/u-boot/include/configs/M54418TWR.h b/qemu/roms/u-boot/include/configs/M54418TWR.h deleted file mode 100644 index 3d7dc1fb2..000000000 --- a/qemu/roms/u-boot/include/configs/M54418TWR.h +++ /dev/null @@ -1,427 +0,0 @@ -/* - * Configuation settings for the Freescale MCF54418 TWR board. - * - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M54418TWR_H -#define _M54418TWR_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MCF5441x /* define processor family */ -#define CONFIG_M54418 /* define processor type */ -#define CONFIG_M54418TWR /* M54418TWR board */ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } - -#undef CONFIG_WATCHDOG - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Command line configuration */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#undef CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_I2C -#undef CONFIG_CMD_JFFS2 -#undef CONFIG_CMD_UBI -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_MII -#undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NAND_YAFFS -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS - -/* - * NAND FLASH - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_JFFS2_NAND -#define CONFIG_NAND_FSL_NFC -#define CONFIG_SYS_NAND_BASE 0xFC0FC000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_NAND_SELECT_DEVICE -#endif - -/* Network configuration */ -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -#define CONFIG_NET_MULTI 1 -#define CONFIG_MII 1 -#define CONFIG_MII_INIT 1 -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 2 -#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN -#define CONFIG_SYS_TX_ETH_BUFFER 2 -#define CONFIG_HAS_ETH1 - -#define CONFIG_SYS_FEC0_PINMUX 0 -#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -#define CONFIG_SYS_FEC1_PINMUX 0 -#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE -#define MCFFEC_TOUT_LOOP 50000 -#define CONFIG_SYS_FEC0_PHYADDR 0 -#define CONFIG_SYS_FEC1_PHYADDR 1 - -#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ - -#ifdef CONFIG_SYS_NAND_BOOT -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ - "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ - "-(jffs2) console=ttyS0,115200" -#else -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ - __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ - __stringify(CONFIG_IPADDR) " ip=" \ - __stringify(CONFIG_IPADDR) ":" \ - __stringify(CONFIG_SERVERIP)":" \ - __stringify(CONFIG_GATEWAYIP)": " \ - __stringify(CONFIG_NETMASK) \ - "::eth0:off:rw console=ttyS0,115200" -#endif - -#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 -#define CONFIG_ETHPRIME "FEC0" -#define CONFIG_IPADDR 192.168.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 - -#define CONFIG_OVERWRITE_ETHADDR_ONCE -#define CONFIG_SYS_FEC_BUF_USE_SRAM -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -#ifndef CONFIG_SYS_DISCOVER_PHY -#define FECDUPLEX FULL -#define FECSPEED _100BASET -#define LINKSTATUS 1 -#else -#define LINKSTATUS 0 -#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#endif -#endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -#define CONFIG_HOSTNAME M54418TWR - -#if defined(CONFIG_CF_SBF) -/* ST Micro serial flash */ -#define CONFIG_SYS_LOAD_ADDR2 0x40010007 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "sbfhdr=sbfhdr.bin\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${sbfhdr};" \ - "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ - "upd=run load; run prog\0" \ - "prog=sf probe 0:1 1000000 3;" \ - "sf erase 0 40000;" \ - "sf write ${loadaddr} 0 40000;" \ - "save\0" \ - "" -#elif defined(CONFIG_SYS_NAND_BOOT) -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${u-boot};\0" \ - "upd=run load; run prog\0" \ - "prog=nand device 0;" \ - "nand erase 0 40000;" \ - "nb_update ${loadaddr} ${filesize};" \ - "save\0" \ - "" -#else -#define CONFIG_SYS_UBOOT_END 0x3FFFF -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=40010000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off mram" " ;" \ - "cp.b ${loadaddr} 0 ${filesize};" \ - "save\0" \ - "" -#endif - -/* Realtime clock */ -#undef CONFIG_MCFRTC -#define CONFIG_RTC_MCFRRTC -#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 - -/* Timer */ -#define CONFIG_MCFTMR -#undef CONFIG_MCFPIT - -/* I2c */ -#undef CONFIG_SYS_FSL_I2C -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -/* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SPEED 80000 -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -/* DSPI and Serial Flash */ -#define CONFIG_CF_SPI -#define CONFIG_CF_DSPI -#define CONFIG_SERIAL_FLASH -#define CONFIG_HARD_SPI -#define CONFIG_SYS_SBFHDR_SIZE 0x7 -#ifdef CONFIG_CMD_SPI -# define CONFIG_SPI_FLASH -# define CONFIG_SPI_FLASH_ATMEL - -# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ - DSPI_CTAR_PCSSCK_1CLK | \ - DSPI_CTAR_PASC(0) | \ - DSPI_CTAR_PDT(0) | \ - DSPI_CTAR_CSSCK(0) | \ - DSPI_CTAR_ASC(0) | \ - DSPI_CTAR_DT(1)) -# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) -# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) -#endif - -/* Input, PCI, Flexbus, and VCO */ -#define CONFIG_EXTRA_CLOCK - -#define CONFIG_PRAM 2048 /* 2048 KB */ - -/* HUSH */ -#define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -#define CONFIG_SYS_PROMPT "-> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) - -#define CONFIG_SYS_MBAR 0xFC000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -/* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) -#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) -#define CONFIG_SYS_DRAM_TEST - -#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT) -#define CONFIG_SERIAL_BOOT -#endif - -#if defined(CONFIG_SERIAL_BOOT) -#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - -#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) -/* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -/* Reserve 256 kB for malloc() */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ - (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash - */ -#if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_MRAM 1 -#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ -#define CONFIG_ENV_SIZE 0x1000 -#endif - -#if defined(CONFIG_CF_SBF) -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_SPI_FLASH 1 -#define CONFIG_ENV_SPI_CS 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#endif -#if defined(CONFIG_SYS_NAND_BOOT) -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_OFFSET 0x80000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#endif -#undef CONFIG_ENV_OVERWRITE - -/* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE - -#undef CONFIG_SYS_FLASH_CFI -#ifdef CONFIG_SYS_FLASH_CFI - -#define CONFIG_FLASH_CFI_DRIVER 1 -/* Max size that the board might have */ -#define CONFIG_SYS_FLASH_SIZE 0x1000000 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -/* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 270 -/* "Real" (hardware) sectors protection */ -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } -#else -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 270 -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 0 -#endif - -/* - * This is setting for JFFS2 support in u-boot. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#ifdef CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_OFFSET (0x800000) -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define MTDIDS_DEFAULT "nand0=m54418twr.nand" - -#define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \ - "7m(kernel)," \ - "-(rootfs)" - -#endif - -#ifdef CONFIG_CMD_UBI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts command */ -#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */ -#define CONFIG_RBTREE -#define MTDIDS_DEFAULT "nand0=NAND" -#define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \ - "-(ubi)" -#endif -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) -#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) -#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ - CF_CACR_ICINVA | CF_CACR_EUSP) -#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ - CF_CACR_DEC | CF_CACR_DDCM_P | \ - CF_CACR_DCINVA) & ~CF_CACR_ICINVA) - -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 12) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ -/* - * CS0 - NOR Flash 16MB - * CS1 - Available - * CS2 - Available - * CS3 - Available - * CS4 - Available - * CS5 - Available - */ - - /* Flash */ -#define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x000F0101 -#define CONFIG_SYS_CS0_CTRL 0x00001D60 - -#endif /* _M54418TWR_H */ |