diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/M52277EVB.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/M52277EVB.h | 322 |
1 files changed, 0 insertions, 322 deletions
diff --git a/qemu/roms/u-boot/include/configs/M52277EVB.h b/qemu/roms/u-boot/include/configs/M52277EVB.h deleted file mode 100644 index cde730595..000000000 --- a/qemu/roms/u-boot/include/configs/M52277EVB.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - * Configuation settings for the Freescale MCF52277 EVB board. - * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M52277EVB_H -#define _M52277EVB_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MCF5227x /* define processor family */ -#define CONFIG_M52277 /* define processor type */ -#define CONFIG_M52277EVB /* M52277EVB board */ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 115200 - -#undef CONFIG_WATCHDOG - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* Command line configuration */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#define CONFIG_CMD_REGINFO -#undef CONFIG_CMD_USB -#undef CONFIG_CMD_BMP -#define CONFIG_CMD_SPI -#define CONFIG_CMD_SF - -#define CONFIG_HOSTNAME M52277EVB -#define CONFIG_SYS_UBOOT_END 0x3FFFF -#define CONFIG_SYS_LOAD_ADDR2 0x40010007 -#ifdef CONFIG_SYS_STMICRO_BOOT -/* ST Micro serial flash */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "uboot=u-boot.bin\0" \ - "load=loadb ${loadaddr} ${baudrate};" \ - "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ - "upd=run load; run prog\0" \ - "prog=sf probe 0:2 10000 1;" \ - "sf erase 0 30000;" \ - "sf write ${loadaddr} 0 30000;" \ - "save\0" \ - "" -#endif -#ifdef CONFIG_SYS_SPANSION_BOOT -#define CONFIG_EXTRA_ENV_SETTINGS \ - "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ - "loadaddr=0x40010000\0" \ - "uboot=u-boot.bin\0" \ - "load=loadb ${loadaddr} ${baudrate}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ - " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ - "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ - __stringify(CONFIG_SYS_UBOOT_END) ";" \ - "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ - " ${filesize}; save\0" \ - "updsbf=run loadsbf; run progsbf\0" \ - "loadsbf=loadb ${loadaddr} ${baudrate};" \ - "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ - "progsbf=sf probe 0:2 10000 1;" \ - "sf erase 0 30000;" \ - "sf write ${loadaddr} 0 30000;" \ - "" -#endif - -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -/* LCD */ -#ifdef CONFIG_CMD_BMP -#define CONFIG_LCD -#define CONFIG_SPLASH_SCREEN -#define CONFIG_LCD_LOGO -#define CONFIG_SHARP_LQ035Q7DH06 -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 -#define CONFIG_SYS_USB_EHCI_CPU_INIT -#endif - -/* Realtime clock */ -#define CONFIG_MCFRTC -#undef RTC_DEBUG -#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) - -/* Timer */ -#define CONFIG_MCFTMR -#undef CONFIG_MCFPIT - -/* I2c */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -/* DSPI and Serial Flash */ -#define CONFIG_CF_SPI -#define CONFIG_CF_DSPI -#define CONFIG_HARD_SPI -#define CONFIG_SYS_SBFHDR_SIZE 0x7 -#ifdef CONFIG_CMD_SPI -# define CONFIG_SYS_DSPI_CS2 -# define CONFIG_SPI_FLASH -# define CONFIG_SPI_FLASH_STMICRO - -# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ - DSPI_CTAR_PCSSCK_1CLK | \ - DSPI_CTAR_PASC(0) | \ - DSPI_CTAR_PDT(0) | \ - DSPI_CTAR_CSSCK(0) | \ - DSPI_CTAR_ASC(0) | \ - DSPI_CTAR_DT(1)) -#endif - -/* Input, PCI, Flexbus, and VCO */ -#define CONFIG_EXTRA_CLOCK - -#define CONFIG_SYS_INPUT_CLKSRC 16000000 - -#define CONFIG_PRAM 2048 /* 2048 KB */ - -#define CONFIG_SYS_PROMPT "-> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) - -#define CONFIG_SYS_MBAR 0xFC000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/* - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ -#define CONFIG_SYS_SDRAM_CFG1 0x43711630 -#define CONFIG_SYS_SDRAM_CFG2 0x56670000 -#define CONFIG_SYS_SDRAM_CTRL 0xE1092000 -#define CONFIG_SYS_SDRAM_EMOD 0x81810000 -#define CONFIG_SYS_SDRAM_MODE 0x00CD0000 -#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x00 - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 -#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) - -#ifdef CONFIG_CF_SBF -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) -#else -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) - -/* - * Configuration for environment - * Environment is not embedded in u-boot. First time runing may have env - * crc error warning if there is no correct environment on the flash. - */ -#ifdef CONFIG_CF_SBF -# define CONFIG_ENV_IS_IN_SPI_FLASH -# define CONFIG_ENV_SPI_CS 2 -#else -# define CONFIG_ENV_IS_IN_FLASH 1 -#endif -#define CONFIG_ENV_OVERWRITE 1 - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#ifdef CONFIG_SYS_STMICRO_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_ENV_OFFSET 0x30000 -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_SECT_SIZE 0x10000 -#endif -#ifdef CONFIG_SYS_SPANSION_BOOT -# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) -# define CONFIG_ENV_SIZE 0x1000 -# define CONFIG_ENV_SECT_SIZE 0x8000 -#endif - -#define CONFIG_SYS_FLASH_CFI -#ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_FLASH_CFI_DRIVER 1 -# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 -# define CONFIG_FLASH_SPANSION_S29WS_N 1 -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -# define CONFIG_SYS_FLASH_CHECKSUM -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } -#endif - -/* - * This is setting for JFFS2 support in u-boot. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#ifdef CONFIG_CMD_JFFS2 -# define CONFIG_JFFS2_DEV "nor0" -# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000) -# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000) -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ - CF_CACR_DISD | CF_CACR_INVI | \ - CF_CACR_CEIB | CF_CACR_DCM | \ - CF_CACR_EUSP) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ -/* - * CS0 - NOR Flash - * CS1 - Available - * CS2 - Available - * CS3 - Available - * CS4 - Available - * CS5 - Available - */ - -#ifdef CONFIG_CF_SBF -#define CONFIG_SYS_CS0_BASE 0x04000000 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS0_CTRL 0x00001FA0 -#else -#define CONFIG_SYS_CS0_BASE 0x00000000 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS0_CTRL 0x00001FA0 -#endif - -#endif /* _M52277EVB_H */ |