diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/CPCI750.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/CPCI750.h | 609 |
1 files changed, 609 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/include/configs/CPCI750.h b/qemu/roms/u-boot/include/configs/CPCI750.h new file mode 100644 index 000000000..304a12bea --- /dev/null +++ b/qemu/roms/u-boot/include/configs/CPCI750.h @@ -0,0 +1,609 @@ +/* + * (C) Copyright 2001 + * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + */ + +/************************************************************************* + * (c) 2004 esd gmbh Hannover + * + * + * from db64360.h file + * by Reinhard Arlt reinhard.arlt@esd-electronics.com + * + ************************************************************************/ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* This define must be before the core.h include */ +#define CONFIG_CPCI750 1 /* this is an CPCI750 board */ + +#ifndef __ASSEMBLY__ +#include <../board/Marvell/include/core.h> +#endif +/*-----------------------------------------------------*/ + +#include "../board/esd/cpci750/local.h" + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_750FX /* we have a 750FX (override local.h) */ + +#define CONFIG_CPCI750 1 /* this is an CPCI750 board */ + +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ + +#define CONFIG_MV64360_ECC /* enable ECC support */ + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* which initialization functions to call for this board */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOARD_PRE_INIT +#define CONFIG_BOARD_EARLY_INIT_F 1 + +#define CONFIG_SYS_BOARD_NAME "CPCI750" +#define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" + +/*#define CONFIG_SYS_HUSH_PARSER*/ +#define CONFIG_SYS_HUSH_PARSER + + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +/* Define which ETH port will be used for connecting the network */ +#define CONFIG_SYS_ETH_PORT ETH_0 + +/* + * The following defines let you select what serial you want to use + * for your console driver. + * + * what to do: + * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial + * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 + * to 0 below. + * + * to use the MPSC, #define CONFIG_MPSC. If you have wired up another + * mpsc channel, change CONFIG_MPSC_PORT to the desired value. + */ +#define CONFIG_MPSC +#define CONFIG_MPSC_PORT 0 + +/* to change the default ethernet port, use this define (options: 0, 1, 2) */ +#define MV_ETH_DEVS 1 +#define CONFIG_ETHER_PORT 0 + +#undef CONFIG_ETHER_PORT_MII /* use RMII */ + +#define CONFIG_BOOTDELAY 5 /* autoboot disabled */ + +#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ + +#define CONFIG_ZERO_BOOTDELAY_CHECK + + +#undef CONFIG_BOOTARGS + +/* ----------------------------------------------------------------------------- + * New bootcommands for Marvell CPCI750 c 2002 Ingo Assmus + */ + +#define CONFIG_IPADDR "192.168.0.185" + +#define CONFIG_SERIAL "AA000001" +#define CONFIG_SERVERIP "10.0.0.79" +#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" + +#define CONFIG_TESTDRAMDATA y +#define CONFIG_TESTDRAMADDRESS n +#define CONFIG_TESETDRAMWALK n + +/* ----------------------------------------------------------------------------- */ + + +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_ALTIVEC /* undef to disable */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_I2C +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_PCI +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DATE +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + + +#define CONFIG_DOS_PARTITION + +#define CONFIG_USE_CPCIDVI + +#ifdef CONFIG_USE_CPCIDVI +#define CONFIG_VIDEO +#define CONFIG_VIDEO_CT69000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO +#define CONFIG_I8042_KBD +#define CONFIG_SYS_ISA_IO 0 +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed default */ + +#define CONFIG_PRAM 0 + +#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +/*#define CONFIG_SYS_MEMTEST_START 0x00400000*/ /* memtest works on */ +/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ +/*#define CONFIG_SYS_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ + +/* +#define CONFIG_SYS_DRAM_TEST + * DRAM tests + * CONFIG_SYS_DRAM_TEST - enables the following tests. + * + * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines + * Environment variable 'test_dram_data' must be + * set to 'y'. + * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely + * addressable. Environment variable + * 'test_dram_address' must be set to 'y'. + * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. + * This test takes about 6 minutes to test 64 MB. + * Environment variable 'test_dram_walk' must be + * set to 'y'. + */ +#define CONFIG_SYS_DRAM_TEST +#if defined(CONFIG_SYS_DRAM_TEST) +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +/*#define CONFIG_SYS_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CONFIG_SYS_DRAM_TEST_DATA +#define CONFIG_SYS_DRAM_TEST_ADDRESS +#define CONFIG_SYS_DRAM_TEST_WALK +#endif /* CONFIG_SYS_DRAM_TEST */ + +#define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ +#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ + +#define CONFIG_SYS_LOAD_ADDR 0x00300000 /* default load address */ + +#define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ + +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_SYS_TCLK 133000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ + + /* + * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS + * To an unused memory region. The stack will remain in cache until RAM + * is initialized +*/ +#undef CONFIG_SYS_INIT_RAM_LOCK +/* #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ +/* #define CONFIG_SYS_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ +#define CONFIG_SYS_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +#define RELOCATE_INTERNAL_RAM_ADDR +#ifdef RELOCATE_INTERNAL_RAM_ADDR +/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/ +#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf1080000 +#endif + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +/* Dummies for BAT 4-7 */ +#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CONFIG_SYS_SDRAM2_BASE 0x20000000 +#define CONFIG_SYS_SDRAM3_BASE 0x30000000 +#define CONFIG_SYS_SDRAM4_BASE 0x40000000 +#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE 0xfff00000 +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max number of memory banks */ +#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 /* size of flash bank */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT, \ + CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT, \ + CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT } +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* show if bank is empty */ + +/* areas to map different things with the GT in physical space */ +#define CONFIG_SYS_DRAM_BANKS 4 + +/* What to put in the bats. */ +#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 + +/* Peripheral Device section */ + +/*******************************************************/ +/* We have on the cpci750 Board : */ +/* GT-Chipset Register Area */ +/* GT-Chipset internal SRAM 256k */ +/* SRAM on external device module */ +/* Real time clock on external device module */ +/* dobble UART on external device module */ +/* Data flash on external device module */ +/* Boot flash on external device module */ +/*******************************************************/ +#define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ +#define CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ + +#undef MARVEL_STANDARD_CFG +#ifndef MARVEL_STANDARD_CFG +/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ +/*#define CONFIG_SYS_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ +#define CONFIG_SYS_INT_SRAM_BASE 0xf1080000 /* GT offers 256k internal fast SRAM */ + +#define CONFIG_SYS_BOOT_SPACE 0xff000000 /* BOOT_CS0 flash 0 */ +#define CONFIG_SYS_DEV0_SPACE 0xfc000000 /* DEV_CS0 flash 1 */ +#define CONFIG_SYS_DEV1_SPACE 0xfd000000 /* DEV_CS1 flash 2 */ +#define CONFIG_SYS_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ +#define CONFIG_SYS_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ + +#define CONFIG_SYS_BOOT_SIZE _16M /* cpci750 flash 0 */ +#define CONFIG_SYS_DEV0_SIZE _16M /* cpci750 flash 1 */ +#define CONFIG_SYS_DEV1_SIZE _16M /* cpci750 flash 2 */ +#define CONFIG_SYS_DEV2_SIZE _16M /* cpci750 flash 3 */ +#define CONFIG_SYS_DEV3_SIZE _16M /* cpci750 nvram/can */ + +/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +#endif + +/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ +#define CONFIG_SYS_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ +#define CONFIG_SYS_DEV3_PAR 0x8FCFFFFF /* nvram/can */ +#define CONFIG_SYS_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ + + /* c 4 a 8 2 4 1 c */ + /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ + /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ + /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ + /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ + + +/* MPP Control MV64360 Appendix P P. 632*/ +#define CONFIG_SYS_MPP_CONTROL_0 0x00002222 /* */ +#define CONFIG_SYS_MPP_CONTROL_1 0x11110000 /* */ +#define CONFIG_SYS_MPP_CONTROL_2 0x11111111 /* */ +#define CONFIG_SYS_MPP_CONTROL_3 0x00001111 /* */ +/* #define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102*/ /* */ + + +#define CONFIG_SYS_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ + +/* setup new config_value for MV64360 DDR-RAM To_do !! */ +/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e18200*/ /* 0x448 */ +/*# define CONFIG_SYS_SDRAM_CONFIG 0xd8e14400*/ /* 0x1400 */ + /* GB has high prio. + idma has low prio + MPSC has low prio + pci has low prio 1 and 2 + cpu has high prio + Data DQS pins == eight (DQS[7:0] foe x8 and x16 devices + ECC disable + non registered DRAM */ + /* 31:26 25:22 21:20 19 18 17 16 */ + /* 100001 0000 010 0 0 0 0 */ + /* refresh_count=0x400 + phisical interleaving disable + virtual interleaving enable */ + /* 15 14 13:0 */ + /* 0 1 0x400 */ +# define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ + + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ + +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ + +/* PCI MEMORY MAP section */ +#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI0_MEM_SIZE _128M +#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 +#define CONFIG_SYS_PCI1_MEM_SIZE _128M + +#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) +#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) + +/* PCI I/O MAP section */ +#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 +#define CONFIG_SYS_PCI0_IO_SIZE _16M +#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 +#define CONFIG_SYS_PCI1_IO_SIZE _16M + +#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) +#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000 +#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) +#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000 + +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE) + +#if defined (CONFIG_750CX) +#define CONFIG_SYS_PCI_IDSEL 0x0 +#else +#define CONFIG_SYS_PCI_IDSEL 0x30 +#endif + +/*----------------------------------------------------------------------- + * IDE/ATA stuff + *----------------------------------------------------------------------- + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ + +#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 1 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ + +#define CONFIG_SYS_ATA_BASE_ADDR 0 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0 + +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ +#ifndef __ASSEMBLY__ +int ata_device(int dev); +#endif +#define ATA_DEVICE(dev) ata_device(dev) +#define CONFIG_ATAPI 1 + +/*---------------------------------------------------------------------- + * Initial BAT mappings + */ + +/* NOTES: + * 1) GUARDED and WRITE_THRU not allowed in IBATS + * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT + */ + +/* SDRAM */ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U + +/* init ram */ +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U + +/* PCI0, PCI1 in one BAT */ +#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS +#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* GT regs, bootrom, all the devices, PCI I/O */ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U + +/* + * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7) + * IBAT4 and DBAT4 + * FIXME: ingo disable BATs for Linux Kernel + */ +/* #undef SETUP_HIGH_BATS_FX750 */ /* don't initialize BATS 4-7 */ +#define SETUP_HIGH_BATS_FX750 /* initialize BATS 4-7 */ + +#ifdef SETUP_HIGH_BATS_FX750 +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U + +/* IBAT5 and DBAT5 */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + +/* IBAT6 and DBAT6 */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +/* IBAT7 and DBAT7 */ +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#else /* set em out of range for Linux !!!!!!!!!!! */ +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U + +/* IBAT5 and DBAT5 */ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U + +/* IBAT6 and DBAT6 */ +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U + +/* IBAT7 and DBAT7 */ +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U + +#endif +/* FIXME: ingo end: disable BATs for Linux Kernel */ + +/* I2C addresses for the two DIMM SPD chips */ +#define DIMM0_I2C_ADDR 0x51 +#define DIMM1_I2C_ADDR 0x52 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CONFIG_SYS_BOOT_FLASH_WIDTH 2 /* 16 bit */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ + +#if 0 +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ +/* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ +#endif + +#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x050 +#define CONFIG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ +#define CONFIG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ + +#define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ +#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ +#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40) + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * L2CR setup -- make sure this is right for your board! + * look in include/mpc74xx.h for the defines used here + */ + +/*#define CONFIG_SYS_L2*/ +#undef CONFIG_SYS_L2 + +/* #ifdef CONFIG_750CX*/ +#if defined (CONFIG_750CX) || defined (CONFIG_750FX) +#define L2_INIT 0 +#else +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ + L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) +#endif + +#define L2_ENABLE (L2_INIT | L2CR_L2E) + +#define CONFIG_SYS_BOARD_ASM_INIT 1 + +#define CPCI750_SLAVE_TEST (((in8(0xf0300000) & 0x80) == 0) ? 0 : 1) +#define CPCI750_ECC_TEST (((in8(0xf0300000) & 0x02) == 0) ? 1 : 0) +#define CONFIG_SYS_PLD_VER 0xf0e00000 + +#define CONFIG_OF_LIBFDT 1 + +#endif /* __CONFIG_H */ |