diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/video/atmel_hlcdfb.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/video/atmel_hlcdfb.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/video/atmel_hlcdfb.c b/qemu/roms/u-boot/drivers/video/atmel_hlcdfb.c new file mode 100644 index 000000000..bb4d7d8c1 --- /dev/null +++ b/qemu/roms/u-boot/drivers/video/atmel_hlcdfb.c @@ -0,0 +1,197 @@ +/* + * Driver for AT91/AT32 MULTI LAYER LCD Controller + * + * Copyright (C) 2012 Atmel Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_hlcdc.h> + +/* configurable parameters */ +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8 +#define ATMEL_LCDC_DMA_BURST_LEN 8 +#ifndef ATMEL_LCDC_GUARD_TIME +#define ATMEL_LCDC_GUARD_TIME 1 +#endif + +#define ATMEL_LCDC_FIFO_SIZE 512 + +#define lcdc_readl(reg) __raw_readl((reg)) +#define lcdc_writel(reg, val) __raw_writel((val), (reg)) + +/* + * the CLUT register map as following + * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0) + */ +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ + lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk) + | ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk) + | ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk), + panel_info.mmio + ATMEL_LCDC_LUT(regno)); +} + +void lcd_ctrl_init(void *lcdbase) +{ + unsigned long value; + struct lcd_dma_desc *desc; + struct atmel_hlcd_regs *regs; + + if (!has_lcdc()) + return; /* No lcdc */ + + regs = (struct atmel_hlcd_regs *)panel_info.mmio; + + /* Disable DISP signal */ + lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_DISPDIS); + while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS)) + udelay(1); + /* Disable synchronization */ + lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS); + while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS)) + udelay(1); + /* Disable pixel clock */ + lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_CLKDIS); + while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS)) + udelay(1); + /* Disable PWM */ + lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_PWMDIS); + while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS)) + udelay(1); + + /* Set pixel clock */ + value = get_lcdc_clk_rate(0) / panel_info.vl_clk; + if (get_lcdc_clk_rate(0) % panel_info.vl_clk) + value++; + + if (value < 1) { + /* Using system clock as pixel clock */ + lcdc_writel(®s->lcdc_lcdcfg0, + LCDC_LCDCFG0_CLKDIV(0) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | panel_info.vl_clk_pol + | LCDC_LCDCFG0_CLKSEL); + + } else { + lcdc_writel(®s->lcdc_lcdcfg0, + LCDC_LCDCFG0_CLKDIV(value - 2) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | panel_info.vl_clk_pol); + } + + /* Initialize control register 5 */ + value = 0; + + value |= panel_info.vl_sync; + +#ifndef LCD_OUTPUT_BPP + /* Output is 24bpp */ + value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP; +#else + switch (LCD_OUTPUT_BPP) { + case 12: + value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP; + break; + case 16: + value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP; + break; + case 18: + value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP; + break; + case 24: + value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP; + break; + default: + BUG(); + break; + } +#endif + + value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME); + value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS); + lcdc_writel(®s->lcdc_lcdcfg5, value); + + /* Vertical & Horizontal Timing */ + value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1); + value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1); + lcdc_writel(®s->lcdc_lcdcfg1, value); + + value = LCDC_LCDCFG2_VBPW(panel_info.vl_upper_margin); + value |= LCDC_LCDCFG2_VFPW(panel_info.vl_lower_margin - 1); + lcdc_writel(®s->lcdc_lcdcfg2, value); + + value = LCDC_LCDCFG3_HBPW(panel_info.vl_left_margin - 1); + value |= LCDC_LCDCFG3_HFPW(panel_info.vl_right_margin - 1); + lcdc_writel(®s->lcdc_lcdcfg3, value); + + /* Display size */ + value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1); + value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1); + lcdc_writel(®s->lcdc_lcdcfg4, value); + + lcdc_writel(®s->lcdc_basecfg0, + LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO); + + switch (NBITS(panel_info.vl_bpix)) { + case 16: + lcdc_writel(®s->lcdc_basecfg1, + LCDC_BASECFG1_RGBMODE_16BPP_RGB_565); + break; + default: + BUG(); + break; + } + + lcdc_writel(®s->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0)); + lcdc_writel(®s->lcdc_basecfg3, 0); + lcdc_writel(®s->lcdc_basecfg4, LCDC_BASECFG4_DMA); + + /* Disable all interrupts */ + lcdc_writel(®s->lcdc_lcdidr, ~0UL); + lcdc_writel(®s->lcdc_baseidr, ~0UL); + + /* Setup the DMA descriptor, this descriptor will loop to itself */ + desc = (struct lcd_dma_desc *)(lcdbase - 16); + + desc->address = (u32)lcdbase; + /* Disable DMA transfer interrupt & descriptor loaded interrupt. */ + desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN + | LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH; + desc->next = (u32)desc; + + lcdc_writel(®s->lcdc_baseaddr, desc->address); + lcdc_writel(®s->lcdc_basectrl, desc->control); + lcdc_writel(®s->lcdc_basenext, desc->next); + lcdc_writel(®s->lcdc_basecher, LCDC_BASECHER_CHEN | + LCDC_BASECHER_UPDATEEN); + + /* Enable LCD */ + value = lcdc_readl(®s->lcdc_lcden); + lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_CLKEN); + while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS)) + udelay(1); + value = lcdc_readl(®s->lcdc_lcden); + lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_SYNCEN); + while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS)) + udelay(1); + value = lcdc_readl(®s->lcdc_lcden); + lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_DISPEN); + while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS)) + udelay(1); + value = lcdc_readl(®s->lcdc_lcden); + lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_PWMEN); + while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS)) + udelay(1); +} |