1 files changed, 100 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-marvell.c b/qemu/roms/u-boot/drivers/usb/host/ehci-marvell.c
new file mode 100644
index 000000000..52c43fdc5
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/usb/host/ehci-marvell.c
@@ -0,0 +1,100 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include "ehci.h"
+#include <asm/arch/cpu.h>
+
+#if defined(CONFIG_KIRKWOOD)
+#include <asm/arch/kirkwood.h>
+#elif defined(CONFIG_ORION5X)
+#include <asm/arch/orion5x.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define rdl(off)	readl(MVUSB0_BASE + (off))
+#define wrl(off, val)	writel((val), MVUSB0_BASE + (off))
+
+#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
+#define USB_TARGET_DRAM		0x0
+
+/*
+ * USB 2.0 Bridge Address Decoding registers setup
+ */
+static void usb_brg_adrdec_setup(void)
+{
+	int i;
+	u32 size, base, attrib;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+
+		/* Enable DRAM bank */
+		switch (i) {
+		case 0:
+			attrib = MVUSB0_CPU_ATTR_DRAM_CS0;
+			break;
+		case 1:
+			attrib = MVUSB0_CPU_ATTR_DRAM_CS1;
+			break;
+		case 2:
+			attrib = MVUSB0_CPU_ATTR_DRAM_CS2;
+			break;
+		case 3:
+			attrib = MVUSB0_CPU_ATTR_DRAM_CS3;
+			break;
+		default:
+			/* invalide bank, disable access */
+			attrib = 0;
+			break;
+		}
+
+		size = gd->bd->bi_dram[i].size;
+		base = gd->bd->bi_dram[i].start;
+		if ((size) && (attrib))
+			wrl(USB_WINDOW_CTRL(i),
+				MVCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
+					attrib, MVCPU_WIN_ENABLE));
+		else
+			wrl(USB_WINDOW_CTRL(i), MVCPU_WIN_DISABLE);
+
+		wrl(USB_WINDOW_BASE(i), base);
+	}
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	usb_brg_adrdec_setup();
+
+	*hccr = (struct ehci_hccr *)(MVUSB0_BASE + 0x100);
+	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+			+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	debug("ehci-marvell: init hccr %x and hcor %x hc_length %d\n",
+		(uint32_t)*hccr, (uint32_t)*hcor,
+		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+	return 0;
+}