diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c b/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c new file mode 100644 index 000000000..edd91a84a --- /dev/null +++ b/qemu/roms/u-boot/drivers/usb/host/ehci-exynos.c @@ -0,0 +1,231 @@ +/* + * SAMSUNG EXYNOS USB HOST EHCI Controller + * + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * Vivek Gautam <gautam.vivek@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <malloc.h> +#include <usb.h> +#include <asm/arch/cpu.h> +#include <asm/arch/ehci.h> +#include <asm/arch/system.h> +#include <asm/arch/power.h> +#include <asm/gpio.h> +#include <asm-generic/errno.h> +#include <linux/compat.h> +#include "ehci.h" + +/* Declare global data pointer */ +DECLARE_GLOBAL_DATA_PTR; + +/** + * Contains pointers to register base addresses + * for the usb controller. + */ +struct exynos_ehci { + struct exynos_usb_phy *usb; + struct ehci_hccr *hcd; + struct fdt_gpio_state vbus_gpio; +}; + +static struct exynos_ehci exynos; + +#ifdef CONFIG_OF_CONTROL +static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) +{ + fdt_addr_t addr; + unsigned int node; + int depth; + + node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI); + if (node <= 0) { + debug("EHCI: Can't get device node for ehci\n"); + return -ENODEV; + } + + /* + * Get the base address for EHCI controller from the device node + */ + addr = fdtdec_get_addr(blob, node, "reg"); + if (addr == FDT_ADDR_T_NONE) { + debug("Can't get the EHCI register address\n"); + return -ENXIO; + } + + exynos->hcd = (struct ehci_hccr *)addr; + + /* Vbus gpio */ + fdtdec_decode_gpio(blob, node, "samsung,vbus-gpio", &exynos->vbus_gpio); + + depth = 0; + node = fdtdec_next_compatible_subnode(blob, node, + COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth); + if (node <= 0) { + debug("EHCI: Can't get device node for usb-phy controller\n"); + return -ENODEV; + } + + /* + * Get the base address for usbphy from the device node + */ + exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node, + "reg"); + if (exynos->usb == NULL) { + debug("Can't get the usbphy register address\n"); + return -ENXIO; + } + + return 0; +} +#endif + +/* Setup the EHCI host controller. */ +static void setup_usb_phy(struct exynos_usb_phy *usb) +{ + u32 hsic_ctrl; + + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); + + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); + + clrbits_le32(&usb->usbphyctrl0, + HOST_CTRL0_FSEL_MASK | + HOST_CTRL0_COMMONON_N | + /* HOST Phy setting */ + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + setbits_le32(&usb->usbphyctrl0, + /* Setting up the ref freq */ + (CLK_24MHZ << 16) | + /* HOST Phy setting */ + HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + udelay(10); + clrbits_le32(&usb->usbphyctrl0, + HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + + /* HSIC Phy Setting */ + hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_SIDDQ); + + clrbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + clrbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + + hsic_ctrl = (((HSIC_CTRL_REFCLKDIV_12 & HSIC_CTRL_REFCLKDIV_MASK) + << HSIC_CTRL_REFCLKDIV_SHIFT) + | ((HSIC_CTRL_REFCLKSEL & HSIC_CTRL_REFCLKSEL_MASK) + << HSIC_CTRL_REFCLKSEL_SHIFT) + | HSIC_CTRL_UTMISWRST); + + setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + + udelay(10); + + clrbits_le32(&usb->hsicphyctrl1, HSIC_CTRL_PHYSWRST | + HSIC_CTRL_UTMISWRST); + + clrbits_le32(&usb->hsicphyctrl2, HSIC_CTRL_PHYSWRST | + HSIC_CTRL_UTMISWRST); + + udelay(20); + + /* EHCI Ctrl setting */ + setbits_le32(&usb->ehcictrl, + EHCICTRL_ENAINCRXALIGN | + EHCICTRL_ENAINCR4 | + EHCICTRL_ENAINCR8 | + EHCICTRL_ENAINCR16); +} + +/* Reset the EHCI host controller. */ +static void reset_usb_phy(struct exynos_usb_phy *usb) +{ + u32 hsic_ctrl; + + /* HOST_PHY reset */ + setbits_le32(&usb->usbphyctrl0, + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + /* HSIC Phy reset */ + hsic_ctrl = (HSIC_CTRL_FORCESUSPEND | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_PHYSWRST); + + setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); + setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); + + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); +} + +/* + * EHCI-initialization + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + struct exynos_ehci *ctx = &exynos; + +#ifdef CONFIG_OF_CONTROL + if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) { + debug("Unable to parse device tree for ehci-exynos\n"); + return -ENODEV; + } +#else + ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy(); + ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci(); +#endif + +#ifdef CONFIG_OF_CONTROL + /* setup the Vbus gpio here */ + if (fdt_gpio_isvalid(&ctx->vbus_gpio) && + !fdtdec_setup_gpio(&ctx->vbus_gpio)) + gpio_direction_output(ctx->vbus_gpio.gpio, 1); +#endif + + setup_usb_phy(ctx->usb); + + board_usb_init(index, init); + + *hccr = ctx->hcd; + *hcor = (struct ehci_hcor *)((uint32_t) *hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n", + (uint32_t)*hccr, (uint32_t)*hcor, + (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + return 0; +} + +/* + * Destroy the appropriate control structures corresponding + * the EHCI host controller. + */ +int ehci_hcd_stop(int index) +{ + struct exynos_ehci *ctx = &exynos; + + reset_usb_phy(ctx->usb); + + return 0; +} |