1 files changed, 597 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/usb/gadget/ep0.c b/qemu/roms/u-boot/drivers/usb/gadget/ep0.c
new file mode 100644
index 000000000..b3214882f
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/usb/gadget/ep0.c
@@ -0,0 +1,597 @@
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
+ * Based on
+ * linux/drivers/usbd/ep0.c
+ *
+ * Copyright (c) 2000, 2001, 2002 Lineo
+ * Copyright (c) 2001 Hewlett Packard
+ *
+ * By:
+ *	Stuart Lynne <sl@lineo.com>,
+ *	Tom Rushworth <tbr@lineo.com>,
+ *	Bruce Balden <balden@lineo.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * This is the builtin ep0 control function. It implements all required functionality
+ * for responding to control requests (SETUP packets).
+ *
+ * XXX
+ *
+ * Currently we do not pass any SETUP packets (or other) to the configured
+ * function driver. This may need to change.
+ *
+ * XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
+ */
+
+#include <common.h>
+#include <usbdevice.h>
+
+#if 0
+#define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args)
+#else
+#define dbg_ep0(lvl,fmt,args...)
+#endif
+
+/* EP0 Configuration Set ********************************************************************* */
+
+
+/**
+ * ep0_get_status - fill in URB data with appropriate status
+ * @device:
+ * @urb:
+ * @index:
+ * @requesttype:
+ *
+ */
+static int ep0_get_status (struct usb_device_instance *device,
+			   struct urb *urb, int index, int requesttype)
+{
+	char *cp;
+
+	urb->actual_length = 2;
+	cp = (char*)urb->buffer;
+	cp[0] = cp[1] = 0;
+
+	switch (requesttype) {
+	case USB_REQ_RECIPIENT_DEVICE:
+		cp[0] = USB_STATUS_SELFPOWERED;
+		break;
+	case USB_REQ_RECIPIENT_INTERFACE:
+		break;
+	case USB_REQ_RECIPIENT_ENDPOINT:
+		cp[0] = usbd_endpoint_halted (device, index);
+		break;
+	case USB_REQ_RECIPIENT_OTHER:
+		urb->actual_length = 0;
+	default:
+		break;
+	}
+	dbg_ep0 (2, "%02x %02x", cp[0], cp[1]);
+	return 0;
+}
+
+/**
+ * ep0_get_one
+ * @device:
+ * @urb:
+ * @result:
+ *
+ * Set a single byte value in the urb send buffer. Return non-zero to signal
+ * a request error.
+ */
+static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
+			__u8 result)
+{
+	urb->actual_length = 1;	/* XXX 2? */
+	((char *) urb->buffer)[0] = result;
+	return 0;
+}
+
+/**
+ * copy_config
+ * @urb: pointer to urb
+ * @data: pointer to configuration data
+ * @length: length of data
+ *
+ * Copy configuration data to urb transfer buffer if there is room for it.
+ */
+void copy_config (struct urb *urb, void *data, int max_length,
+			 int max_buf)
+{
+	int available;
+	int length;
+
+	/*dbg_ep0(3, "-> actual: %d buf: %d max_buf: %d max_length: %d data: %p", */
+	/*        urb->actual_length, urb->buffer_length, max_buf, max_length, data); */
+
+	if (!data) {
+		dbg_ep0 (1, "data is NULL");
+		return;
+	}
+	length = max_length;
+
+	if (length > max_length) {
+		dbg_ep0 (1, "length: %d >= max_length: %d", length,
+			 max_length);
+		return;
+	}
+	/*dbg_ep0(1, "   actual: %d buf: %d max_buf: %d max_length: %d length: %d", */
+	/*        urb->actual_length, urb->buffer_length, max_buf, max_length, length); */
+
+	if ((available =
+	     /*urb->buffer_length */ max_buf - urb->actual_length) <= 0) {
+		return;
+	}
+	/*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+	/*        urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+	if (length > available) {
+		length = available;
+	}
+	/*dbg_ep0(1, "actual: %d buf: %d max_buf: %d length: %d available: %d", */
+	/*        urb->actual_length, urb->buffer_length, max_buf, length, available); */
+
+	memcpy (urb->buffer + urb->actual_length, data, length);
+	urb->actual_length += length;
+
+	dbg_ep0 (3,
+		 "copy_config: <- actual: %d buf: %d max_buf: %d max_length: %d available: %d",
+		 urb->actual_length, urb->buffer_length, max_buf, max_length,
+		 available);
+}
+
+/**
+ * ep0_get_descriptor
+ * @device:
+ * @urb:
+ * @max:
+ * @descriptor_type:
+ * @index:
+ *
+ * Called by ep0_rx_process for a get descriptor device command. Determine what
+ * descriptor is being requested, copy to send buffer. Return zero if ok to send,
+ * return non-zero to signal a request error.
+ */
+static int ep0_get_descriptor (struct usb_device_instance *device,
+			       struct urb *urb, int max, int descriptor_type,
+			       int index)
+{
+	int port = 0;		/* XXX compound device */
+
+	/*dbg_ep0(3, "max: %x type: %x index: %x", max, descriptor_type, index); */
+
+	if (!urb || !urb->buffer || !urb->buffer_length
+	    || (urb->buffer_length < 255)) {
+		dbg_ep0 (2, "invalid urb %p", urb);
+		return -1L;
+	}
+
+	/* setup tx urb */
+	urb->actual_length = 0;
+
+	dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
+
+	switch (descriptor_type) {
+	case USB_DESCRIPTOR_TYPE_DEVICE:
+		{
+			struct usb_device_descriptor *device_descriptor;
+			if (!
+			    (device_descriptor =
+			     usbd_device_device_descriptor (device, port))) {
+				return -1;
+			}
+			/* copy descriptor for this device */
+			copy_config (urb, device_descriptor,
+				     sizeof (struct usb_device_descriptor),
+				     max);
+
+			/* correct the correct control endpoint 0 max packet size into the descriptor */
+			device_descriptor =
+				(struct usb_device_descriptor *) urb->buffer;
+
+		}
+		dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
+		break;
+
+	case USB_DESCRIPTOR_TYPE_CONFIGURATION:
+		{
+			struct usb_configuration_descriptor
+				*configuration_descriptor;
+			struct usb_device_descriptor *device_descriptor;
+			if (!
+			    (device_descriptor =
+			     usbd_device_device_descriptor (device, port))) {
+				return -1;
+			}
+			/*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */
+			if (index >= device_descriptor->bNumConfigurations) {
+				dbg_ep0 (0, "index too large: %d >= %d", index,
+					 device_descriptor->
+					 bNumConfigurations);
+				return -1;
+			}
+
+			if (!
+			    (configuration_descriptor =
+			     usbd_device_configuration_descriptor (device,
+								   port,
+								   index))) {
+				dbg_ep0 (0,
+					 "usbd_device_configuration_descriptor failed: %d",
+					 index);
+				return -1;
+			}
+			dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
+			copy_config (urb, configuration_descriptor,
+
+					cpu_to_le16(configuration_descriptor->wTotalLength),
+				     max);
+		}
+
+		break;
+
+	case USB_DESCRIPTOR_TYPE_STRING:
+		{
+			struct usb_string_descriptor *string_descriptor;
+			if (!(string_descriptor = usbd_get_string (index))) {
+				serial_printf("Invalid string index %d\n", index);
+				return -1;
+			}
+			dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
+			copy_config (urb, string_descriptor, string_descriptor->bLength, max);
+		}
+		break;
+	case USB_DESCRIPTOR_TYPE_INTERFACE:
+	serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
+		return -1;
+	case USB_DESCRIPTOR_TYPE_ENDPOINT:
+		serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
+		return -1;
+	case USB_DESCRIPTOR_TYPE_HID:
+		{
+			serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
+			return -1;	/* unsupported at this time */
+#if 0
+			int bNumInterface =
+				le16_to_cpu (urb->device_request.wIndex);
+			int bAlternateSetting = 0;
+			int class = 0;
+			struct usb_class_descriptor *class_descriptor;
+
+			if (!(class_descriptor =
+			      usbd_device_class_descriptor_index (device,
+								  port, 0,
+								  bNumInterface,
+								  bAlternateSetting,
+								  class))
+			    || class_descriptor->descriptor.hid.bDescriptorType != USB_DT_HID) {
+				dbg_ep0 (3, "[%d] interface is not HID",
+					 bNumInterface);
+				return -1;
+			}
+			/* copy descriptor for this class */
+			copy_config (urb, class_descriptor,
+				     class_descriptor->descriptor.hid.bLength,
+				     max);
+#endif
+		}
+		break;
+	case USB_DESCRIPTOR_TYPE_REPORT:
+		{
+			serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
+			return -1;	/* unsupported at this time */
+#if 0
+			int bNumInterface =
+				le16_to_cpu (urb->device_request.wIndex);
+			int bAlternateSetting = 0;
+			int class = 0;
+			struct usb_class_report_descriptor *report_descriptor;
+
+			if (!(report_descriptor =
+			      usbd_device_class_report_descriptor_index
+			      (device, port, 0, bNumInterface,
+			       bAlternateSetting, class))
+			    || report_descriptor->bDescriptorType !=
+			    USB_DT_REPORT) {
+				dbg_ep0 (3, "[%d] descriptor is not REPORT",
+					 bNumInterface);
+				return -1;
+			}
+			/* copy report descriptor for this class */
+			/*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */
+			if (max - urb->actual_length > 0) {
+				int length =
+					MIN (report_descriptor->wLength,
+					     max - urb->actual_length);
+				memcpy (urb->buffer + urb->actual_length,
+					&report_descriptor->bData[0], length);
+				urb->actual_length += length;
+			}
+#endif
+		}
+		break;
+	case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+#if defined(CONFIG_USBD_HS)
+		{
+			struct usb_qualifier_descriptor *qualifier_descriptor =
+				device->qualifier_descriptor;
+
+			if (!qualifier_descriptor)
+				return -1;
+
+			/* copy descriptor for this device */
+			copy_config(urb, qualifier_descriptor,
+					sizeof(struct usb_qualifier_descriptor),
+					max);
+
+		}
+		dbg_ep0(3, "copied qualifier descriptor, actual_length: 0x%x",
+				urb->actual_length);
+#else
+		return -1;
+#endif
+		break;
+
+	default:
+		return -1;
+	}
+
+
+	dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
+		 urb->buffer, urb->buffer_length, urb->actual_length,
+		 device->bus->endpoint_array[0].tx_packetSize);
+/*
+    if ((urb->actual_length < max) && !(urb->actual_length % device->bus->endpoint_array[0].tx_packetSize)) {
+	dbg_ep0(0, "adding null byte");
+	urb->buffer[urb->actual_length++] = 0;
+	dbg_ep0(0, "urb: buffer_length: %2d actual_length: %2d packet size: %2d",
+		urb->buffer_length, urb->actual_length device->bus->endpoint_array[0].tx_packetSize);
+    }
+*/
+	return 0;
+
+}
+
+/**
+ * ep0_recv_setup - called to indicate URB has been received
+ * @urb: pointer to struct urb
+ *
+ * Check if this is a setup packet, process the device request, put results
+ * back into the urb and return zero or non-zero to indicate success (DATA)
+ * or failure (STALL).
+ *
+ */
+int ep0_recv_setup (struct urb *urb)
+{
+	/*struct usb_device_request *request = urb->buffer; */
+	/*struct usb_device_instance *device = urb->device; */
+
+	struct usb_device_request *request;
+	struct usb_device_instance *device;
+	int address;
+
+	dbg_ep0 (0, "entering ep0_recv_setup()");
+	if (!urb || !urb->device) {
+		dbg_ep0 (3, "invalid URB %p", urb);
+		return -1;
+	}
+
+	request = &urb->device_request;
+	device = urb->device;
+
+	dbg_ep0 (3, "urb: %p device: %p", urb, urb->device);
+
+
+	/*dbg_ep0(2, "-       -       -       -       -       -       -       -       -       -"); */
+
+	dbg_ep0 (2,
+		 "bmRequestType:%02x bRequest:%02x wValue:%04x wIndex:%04x wLength:%04x %s",
+		 request->bmRequestType, request->bRequest,
+		 le16_to_cpu (request->wValue), le16_to_cpu (request->wIndex),
+		 le16_to_cpu (request->wLength),
+		 USBD_DEVICE_REQUESTS (request->bRequest));
+
+	/* handle USB Standard Request (c.f. USB Spec table 9-2) */
+	if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+		if(device->device_state <= STATE_CONFIGURED){
+			/*	Attempt to handle a CDC specific request if we are
+			 *	in the configured state.
+			 */
+			return device->cdc_recv_setup(request,urb);
+		}
+		dbg_ep0 (1, "non standard request: %x",
+			 request->bmRequestType & USB_REQ_TYPE_MASK);
+		return -1;	/* Stall here */
+	}
+
+	switch (device->device_state) {
+	case STATE_CREATED:
+	case STATE_ATTACHED:
+	case STATE_POWERED:
+		/* It actually is important to allow requests in these states,
+		 * Windows will request descriptors before assigning an
+		 * address to the client.
+		 */
+
+		/*dbg_ep0 (1, "request %s not allowed in this state: %s", */
+		/*                USBD_DEVICE_REQUESTS(request->bRequest), */
+		/*                usbd_device_states[device->device_state]); */
+		/*return -1; */
+		break;
+
+	case STATE_INIT:
+	case STATE_DEFAULT:
+		switch (request->bRequest) {
+		case USB_REQ_GET_STATUS:
+		case USB_REQ_GET_INTERFACE:
+		case USB_REQ_SYNCH_FRAME:	/* XXX should never see this (?) */
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+		case USB_REQ_SET_DESCRIPTOR:
+			/* case USB_REQ_SET_CONFIGURATION: */
+		case USB_REQ_SET_INTERFACE:
+			dbg_ep0 (1,
+				 "request %s not allowed in DEFAULT state: %s",
+				 USBD_DEVICE_REQUESTS (request->bRequest),
+				 usbd_device_states[device->device_state]);
+			return -1;
+
+		case USB_REQ_SET_CONFIGURATION:
+		case USB_REQ_SET_ADDRESS:
+		case USB_REQ_GET_DESCRIPTOR:
+		case USB_REQ_GET_CONFIGURATION:
+			break;
+		}
+	case STATE_ADDRESSED:
+	case STATE_CONFIGURED:
+		break;
+	case STATE_UNKNOWN:
+		dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
+			 USBD_DEVICE_REQUESTS (request->bRequest),
+			 usbd_device_states[device->device_state]);
+		return -1;
+	}
+
+	/* handle all requests that return data (direction bit set on bm RequestType) */
+	if ((request->bmRequestType & USB_REQ_DIRECTION_MASK)) {
+
+		dbg_ep0 (3, "Device-to-Host");
+
+		switch (request->bRequest) {
+
+		case USB_REQ_GET_STATUS:
+			return ep0_get_status (device, urb, request->wIndex,
+					       request->bmRequestType &
+					       USB_REQ_RECIPIENT_MASK);
+
+		case USB_REQ_GET_DESCRIPTOR:
+			return ep0_get_descriptor (device, urb,
+						   le16_to_cpu (request->wLength),
+						   le16_to_cpu (request->wValue) >> 8,
+						   le16_to_cpu (request->wValue) & 0xff);
+
+		case USB_REQ_GET_CONFIGURATION:
+			serial_printf("get config %d\n", device->configuration);
+			return ep0_get_one (device, urb,
+					    device->configuration);
+
+		case USB_REQ_GET_INTERFACE:
+			return ep0_get_one (device, urb, device->alternate);
+
+		case USB_REQ_SYNCH_FRAME:	/* XXX should never see this (?) */
+			return -1;
+
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+		case USB_REQ_SET_ADDRESS:
+		case USB_REQ_SET_DESCRIPTOR:
+		case USB_REQ_SET_CONFIGURATION:
+		case USB_REQ_SET_INTERFACE:
+			return -1;
+		}
+	}
+	/* handle the requests that do not return data */
+	else {
+
+
+		/*dbg_ep0(3, "Host-to-Device"); */
+		switch (request->bRequest) {
+
+		case USB_REQ_CLEAR_FEATURE:
+		case USB_REQ_SET_FEATURE:
+			dbg_ep0 (0, "Host-to-Device");
+			switch (request->
+				bmRequestType & USB_REQ_RECIPIENT_MASK) {
+			case USB_REQ_RECIPIENT_DEVICE:
+				/* XXX DEVICE_REMOTE_WAKEUP or TEST_MODE would be added here */
+				/* XXX fall through for now as we do not support either */
+			case USB_REQ_RECIPIENT_INTERFACE:
+			case USB_REQ_RECIPIENT_OTHER:
+				dbg_ep0 (0, "request %s not",
+					 USBD_DEVICE_REQUESTS (request->bRequest));
+			default:
+				return -1;
+
+			case USB_REQ_RECIPIENT_ENDPOINT:
+				dbg_ep0 (0, "ENDPOINT: %x", le16_to_cpu (request->wValue));
+				if (le16_to_cpu (request->wValue) == USB_ENDPOINT_HALT) {
+					/*return usbd_device_feature (device, le16_to_cpu (request->wIndex), */
+					/*                    request->bRequest == USB_REQ_SET_FEATURE); */
+					/* NEED TO IMPLEMENT THIS!!! */
+					return -1;
+				} else {
+					dbg_ep0 (1, "request %s bad wValue: %04x",
+						 USBD_DEVICE_REQUESTS
+						 (request->bRequest),
+						 le16_to_cpu (request->wValue));
+					return -1;
+				}
+			}
+
+		case USB_REQ_SET_ADDRESS:
+			/* check if this is a re-address, reset first if it is (this shouldn't be possible) */
+			if (device->device_state != STATE_DEFAULT) {
+				dbg_ep0 (1, "set_address: %02x state: %s",
+					 le16_to_cpu (request->wValue),
+					 usbd_device_states[device->device_state]);
+				return -1;
+			}
+			address = le16_to_cpu (request->wValue);
+			if ((address & 0x7f) != address) {
+				dbg_ep0 (1, "invalid address %04x %04x",
+					 address, address & 0x7f);
+				return -1;
+			}
+			device->address = address;
+
+			/*dbg_ep0(2, "address: %d %d %d", */
+			/*        request->wValue, le16_to_cpu(request->wValue), device->address); */
+
+			return 0;
+
+		case USB_REQ_SET_DESCRIPTOR:	/* XXX should we support this? */
+			dbg_ep0 (0, "set descriptor: NOT SUPPORTED");
+			return -1;
+
+		case USB_REQ_SET_CONFIGURATION:
+			/* c.f. 9.4.7 - the top half of wValue is reserved */
+			device->configuration = le16_to_cpu(request->wValue) & 0xff;
+
+			/* reset interface and alternate settings */
+			device->interface = device->alternate = 0;
+
+			/*dbg_ep0(2, "set configuration: %d", device->configuration); */
+			/*serial_printf("DEVICE_CONFIGURED.. event?\n"); */
+			return 0;
+
+		case USB_REQ_SET_INTERFACE:
+			device->interface = le16_to_cpu (request->wIndex);
+			device->alternate = le16_to_cpu (request->wValue);
+			/*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */
+			serial_printf ("DEVICE_SET_INTERFACE.. event?\n");
+			return 0;
+
+		case USB_REQ_GET_STATUS:
+		case USB_REQ_GET_DESCRIPTOR:
+		case USB_REQ_GET_CONFIGURATION:
+		case USB_REQ_GET_INTERFACE:
+		case USB_REQ_SYNCH_FRAME:	/* XXX should never see this (?) */
+			return -1;
+		}
+	}
+	return -1;
+}