1 files changed, 130 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/serial/mcfuart.c b/qemu/roms/u-boot/drivers/serial/mcfuart.c
new file mode 100644
index 000000000..407354fc4
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/serial/mcfuart.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Minimal serial functions needed to use one of the uart ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <serial.h>
+#include <linux/compiler.h>
+
+#include <asm/immap.h>
+#include <asm/uart.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void uart_port_conf(int port);
+
+static int mcf_serial_init(void)
+{
+	volatile uart_t *uart;
+	u32 counter;
+
+	uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+
+	uart_port_conf(CONFIG_SYS_UART_PORT);
+
+	/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
+	uart->ucr = UART_UCR_RESET_RX;
+	uart->ucr = UART_UCR_RESET_TX;
+	uart->ucr = UART_UCR_RESET_ERROR;
+	uart->ucr = UART_UCR_RESET_MR;
+	__asm__("nop");
+
+	uart->uimr = 0;
+
+	/* write to CSR: RX/TX baud rate from timers */
+	uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK);
+
+	uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE);
+	uart->umr = UART_UMR_SB_STOP_BITS_1;
+
+	/* Setting up BaudRate */
+	counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
+	counter = counter / gd->baudrate;
+
+	/* write to CTUR: divide counter upper byte */
+	uart->ubg1 = (u8) ((counter & 0xff00) >> 8);
+	/* write to CTLR: divide counter lower byte */
+	uart->ubg2 = (u8) (counter & 0x00ff);
+
+	uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED);
+
+	return (0);
+}
+
+static void mcf_serial_putc(const char c)
+{
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+
+	if (c == '\n')
+		serial_putc('\r');
+
+	/* Wait for last character to go. */
+	while (!(uart->usr & UART_USR_TXRDY)) ;
+
+	uart->utb = c;
+}
+
+static int mcf_serial_getc(void)
+{
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+
+	/* Wait for a character to arrive. */
+	while (!(uart->usr & UART_USR_RXRDY)) ;
+	return uart->urb;
+}
+
+static int mcf_serial_tstc(void)
+{
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+
+	return (uart->usr & UART_USR_RXRDY);
+}
+
+static void mcf_serial_setbrg(void)
+{
+	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
+	u32 counter;
+
+	/* Setting up BaudRate */
+	counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
+	counter = counter / gd->baudrate;
+
+	/* write to CTUR: divide counter upper byte */
+	uart->ubg1 = ((counter & 0xff00) >> 8);
+	/* write to CTLR: divide counter lower byte */
+	uart->ubg2 = (counter & 0x00ff);
+
+	uart->ucr = UART_UCR_RESET_RX;
+	uart->ucr = UART_UCR_RESET_TX;
+
+	uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
+}
+
+static struct serial_device mcf_serial_drv = {
+	.name	= "mcf_serial",
+	.start	= mcf_serial_init,
+	.stop	= NULL,
+	.setbrg	= mcf_serial_setbrg,
+	.putc	= mcf_serial_putc,
+	.puts	= default_serial_puts,
+	.getc	= mcf_serial_getc,
+	.tstc	= mcf_serial_tstc,
+};
+
+void mcf_serial_initialize(void)
+{
+	serial_register(&mcf_serial_drv);
+}
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return &mcf_serial_drv;
+}