diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/qe/uec_phy.h')
| -rw-r--r-- | qemu/roms/u-boot/drivers/qe/uec_phy.h | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/qe/uec_phy.h b/qemu/roms/u-boot/drivers/qe/uec_phy.h new file mode 100644 index 000000000..11cbc253b --- /dev/null +++ b/qemu/roms/u-boot/drivers/qe/uec_phy.h @@ -0,0 +1,240 @@ +/* + * Copyright (C) 2005, 2011 Freescale Semiconductor, Inc. + * + * Author: Shlomi Gridish <gridish@freescale.com> + * + * Description: UCC ethernet driver -- PHY handling + * Driver for UEC on QE + * Based on 8260_io/fcc_enet.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __UEC_PHY_H__ +#define __UEC_PHY_H__ + +#define MII_end ((u32)-2) +#define MII_read ((u32)-1) + +#define MIIMIND_BUSY 0x00000001 +#define MIIMIND_NOTVALID 0x00000004 + +#define UGETH_AN_TIMEOUT 2000 + +/* Cicada Extended Control Register 1 */ +#define MII_CIS8201_EXT_CON1 0x17 +#define MII_CIS8201_EXTCON1_INIT 0x0000 + +/* Cicada Interrupt Mask Register */ +#define MII_CIS8201_IMASK 0x19 +#define MII_CIS8201_IMASK_IEN 0x8000 +#define MII_CIS8201_IMASK_SPEED 0x4000 +#define MII_CIS8201_IMASK_LINK 0x2000 +#define MII_CIS8201_IMASK_DUPLEX 0x1000 +#define MII_CIS8201_IMASK_MASK 0xf000 + +/* Cicada Interrupt Status Register */ +#define MII_CIS8201_ISTAT 0x1a +#define MII_CIS8201_ISTAT_STATUS 0x8000 +#define MII_CIS8201_ISTAT_SPEED 0x4000 +#define MII_CIS8201_ISTAT_LINK 0x2000 +#define MII_CIS8201_ISTAT_DUPLEX 0x1000 + +/* Cicada Auxiliary Control/Status Register */ +#define MII_CIS8201_AUX_CONSTAT 0x1c +#define MII_CIS8201_AUXCONSTAT_INIT 0x0004 +#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020 +#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018 +#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010 +#define MII_CIS8201_AUXCONSTAT_100 0x0008 + +/* 88E1011 PHY Status Register */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_LINK 0x0400 + +#define MII_M1011_IEVENT 0x13 +#define MII_M1011_IEVENT_CLEAR 0x0000 + +#define MII_M1011_IMASK 0x12 +#define MII_M1011_IMASK_INIT 0x6400 +#define MII_M1011_IMASK_CLEAR 0x0000 + +/* 88E1111 PHY Register */ +#define MII_M1111_PHY_EXT_CR 0x14 +#define MII_M1111_RX_DELAY 0x80 +#define MII_M1111_TX_DELAY 0x2 +#define MII_M1111_PHY_EXT_SR 0x1b +#define MII_M1111_HWCFG_MODE_MASK 0xf +#define MII_M1111_HWCFG_MODE_RGMII 0xb + +#define MII_DM9161_SCR 0x10 +#define MII_DM9161_SCR_INIT 0x0610 +#define MII_DM9161_SCR_RMII_INIT 0x0710 + +/* DM9161 Specified Configuration and Status Register */ +#define MII_DM9161_SCSR 0x11 +#define MII_DM9161_SCSR_100F 0x8000 +#define MII_DM9161_SCSR_100H 0x4000 +#define MII_DM9161_SCSR_10F 0x2000 +#define MII_DM9161_SCSR_10H 0x1000 + +/* DM9161 Interrupt Register */ +#define MII_DM9161_INTR 0x15 +#define MII_DM9161_INTR_PEND 0x8000 +#define MII_DM9161_INTR_DPLX_MASK 0x0800 +#define MII_DM9161_INTR_SPD_MASK 0x0400 +#define MII_DM9161_INTR_LINK_MASK 0x0200 +#define MII_DM9161_INTR_MASK 0x0100 +#define MII_DM9161_INTR_DPLX_CHANGE 0x0010 +#define MII_DM9161_INTR_SPD_CHANGE 0x0008 +#define MII_DM9161_INTR_LINK_CHANGE 0x0004 +#define MII_DM9161_INTR_INIT 0x0000 +#define MII_DM9161_INTR_STOP \ +(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \ + | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK) + +/* DM9161 10BT Configuration/Status */ +#define MII_DM9161_10BTCSR 0x12 +#define MII_DM9161_10BTCSR_INIT 0x7800 + +#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ + SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | \ + SUPPORTED_100baseT_Full | \ + SUPPORTED_Autoneg | \ + SUPPORTED_TP | \ + SUPPORTED_MII) + +#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \ + SUPPORTED_1000baseT_Half | \ + SUPPORTED_1000baseT_Full) + +#define MII_READ_COMMAND 0x00000001 + +#define MII_INTERRUPT_DISABLED 0x0 +#define MII_INTERRUPT_ENABLED 0x1 + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 + +/* Duplex, half or full. */ +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 + +/* Indicates what features are supported by the interface. */ +#define SUPPORTED_10baseT_Half (1 << 0) +#define SUPPORTED_10baseT_Full (1 << 1) +#define SUPPORTED_100baseT_Half (1 << 2) +#define SUPPORTED_100baseT_Full (1 << 3) +#define SUPPORTED_1000baseT_Half (1 << 4) +#define SUPPORTED_1000baseT_Full (1 << 5) +#define SUPPORTED_Autoneg (1 << 6) +#define SUPPORTED_TP (1 << 7) +#define SUPPORTED_AUI (1 << 8) +#define SUPPORTED_MII (1 << 9) +#define SUPPORTED_FIBRE (1 << 10) +#define SUPPORTED_BNC (1 << 11) +#define SUPPORTED_10000baseT_Full (1 << 12) + +#define ADVERTISED_10baseT_Half (1 << 0) +#define ADVERTISED_10baseT_Full (1 << 1) +#define ADVERTISED_100baseT_Half (1 << 2) +#define ADVERTISED_100baseT_Full (1 << 3) +#define ADVERTISED_1000baseT_Half (1 << 4) +#define ADVERTISED_1000baseT_Full (1 << 5) +#define ADVERTISED_Autoneg (1 << 6) +#define ADVERTISED_TP (1 << 7) +#define ADVERTISED_AUI (1 << 8) +#define ADVERTISED_MII (1 << 9) +#define ADVERTISED_FIBRE (1 << 10) +#define ADVERTISED_BNC (1 << 11) +#define ADVERTISED_10000baseT_Full (1 << 12) + +/* Taken from mii_if_info and sungem_phy.h */ +struct uec_mii_info { + /* Information about the PHY type */ + /* And management functions */ + struct phy_info *phyinfo; + + struct eth_device *dev; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* The most recently read link state */ + int link; + + /* Enabled Interrupts */ + u32 interrupts; + + u32 advertising; + int autoneg; + int mii_id; + + /* private data pointer */ + /* For use by PHYs to maintain extra state */ + void *priv; + + /* Provided by ethernet driver */ + int (*mdio_read) (struct eth_device * dev, int mii_id, int reg); + void (*mdio_write) (struct eth_device * dev, int mii_id, int reg, + int val); +}; + +/* struct phy_info: a structure which defines attributes for a PHY + * + * id will contain a number which represents the PHY. During + * startup, the driver will poll the PHY to find out what its + * UID--as defined by registers 2 and 3--is. The 32-bit result + * gotten from the PHY will be ANDed with phy_id_mask to + * discard any bits which may change based on revision numbers + * unimportant to functionality + * + * There are 6 commands which take a ugeth_mii_info structure. + * Each PHY must declare config_aneg, and read_status. + */ +struct phy_info { + u32 phy_id; + char *name; + unsigned int phy_id_mask; + u32 features; + + /* Called to initialize the PHY */ + int (*init) (struct uec_mii_info * mii_info); + + /* Called to suspend the PHY for power */ + int (*suspend) (struct uec_mii_info * mii_info); + + /* Reconfigures autonegotiation (or disables it) */ + int (*config_aneg) (struct uec_mii_info * mii_info); + + /* Determines the negotiated speed and duplex */ + int (*read_status) (struct uec_mii_info * mii_info); + + /* Clears any pending interrupts */ + int (*ack_interrupt) (struct uec_mii_info * mii_info); + + /* Enables or disables interrupts */ + int (*config_intr) (struct uec_mii_info * mii_info); + + /* Clears up any memory if needed */ + void (*close) (struct uec_mii_info * mii_info); +}; + +struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info); +void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, + int value); +int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum); +void mii_clear_phy_interrupt (struct uec_mii_info *mii_info); +void mii_configure_phy_interrupt (struct uec_mii_info *mii_info, + u32 interrupts); +#endif /* __UEC_PHY_H__ */ |