diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/net/4xx_enet.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/net/4xx_enet.c | 2059 |
1 files changed, 2059 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/net/4xx_enet.c b/qemu/roms/u-boot/drivers/net/4xx_enet.c new file mode 100644 index 000000000..381ec4286 --- /dev/null +++ b/qemu/roms/u-boot/drivers/net/4xx_enet.c @@ -0,0 +1,2059 @@ +/* + * SPDX-License-Identifier: GPL-2.0 IBM-pibs + */ +/*-----------------------------------------------------------------------------+ + * + * File Name: enetemac.c + * + * Function: Device driver for the ethernet EMAC3 macro on the 405GP. + * + * Author: Mark Wisner + * + * Change Activity- + * + * Date Description of Change BY + * --------- --------------------- --- + * 05-May-99 Created MKW + * 27-Jun-99 Clean up JWB + * 16-Jul-99 Added MAL error recovery and better IP packet handling MKW + * 29-Jul-99 Added Full duplex support MKW + * 06-Aug-99 Changed names for Mal CR reg MKW + * 23-Aug-99 Turned off SYE when running at 10Mbs MKW + * 24-Aug-99 Marked descriptor empty after call_xlc MKW + * 07-Sep-99 Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16 MCG + * to avoid chaining maximum sized packets. Push starting + * RX descriptor address up to the next cache line boundary. + * 16-Jan-00 Added support for booting with IP of 0x0 MKW + * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the + * EMAC0_RXM register. JWB + * 12-Mar-01 anne-sophie.harnois@nextream.fr + * - Variables are compatible with those already defined in + * include/net.h + * - Receive buffer descriptor ring is used to send buffers + * to the user + * - Info print about send/received/handled packet number if + * INFO_405_ENET is set + * 17-Apr-01 stefan.roese@esd-electronics.com + * - MAL reset in "eth_halt" included + * - Enet speed and duplex output now in one line + * 08-May-01 stefan.roese@esd-electronics.com + * - MAL error handling added (eth_init called again) + * 13-Nov-01 stefan.roese@esd-electronics.com + * - Set IST bit in EMAC0_MR1 reg upon 100MBit or full duplex + * 04-Jan-02 stefan.roese@esd-electronics.com + * - Wait for PHY auto negotiation to complete added + * 06-Feb-02 stefan.roese@esd-electronics.com + * - Bug fixed in waiting for auto negotiation to complete + * 26-Feb-02 stefan.roese@esd-electronics.com + * - rx and tx buffer descriptors now allocated (no fixed address + * used anymore) + * 17-Jun-02 stefan.roese@esd-electronics.com + * - MAL error debug printf 'M' removed (rx de interrupt may + * occur upon many incoming packets with only 4 rx buffers). + *-----------------------------------------------------------------------------* + * 17-Nov-03 travis.sawyer@sandburst.com + * - ported from 405gp_enet.c to utilized upto 4 EMAC ports + * in the 440GX. This port should work with the 440GP + * (2 EMACs) also + * 15-Aug-05 sr@denx.de + * - merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c + now handling all 4xx cpu's. + *-----------------------------------------------------------------------------*/ + +#include <config.h> +#include <common.h> +#include <net.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/cache.h> +#include <asm/mmu.h> +#include <commproc.h> +#include <asm/ppc4xx.h> +#include <asm/ppc4xx-emac.h> +#include <asm/ppc4xx-mal.h> +#include <miiphy.h> +#include <malloc.h> +#include <linux/compiler.h> + +#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) +#error "CONFIG_MII has to be defined!" +#endif + +#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */ +#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* 5000 ms autonegotiate timeout */ + +/* Ethernet Transmit and Receive Buffers */ +/* AS.HARNOIS + * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from + * PKTSIZE and PKTSIZE_ALIGN (include/net.h) + */ +#define ENET_MAX_MTU PKTSIZE +#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN + +/*-----------------------------------------------------------------------------+ + * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal + * Interrupt Controller). + *-----------------------------------------------------------------------------*/ +#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS)) + +#if defined(CONFIG_HAS_ETH3) +#if !defined(CONFIG_440GX) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ + UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) +#else +/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */ +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) +#define UIC_ETHxB (UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) +#endif /* !defined(CONFIG_440GX) */ +#elif defined(CONFIG_HAS_ETH2) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ + UIC_MASK(ETH_IRQ_NUM(2))) +#elif defined(CONFIG_HAS_ETH1) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) +#else +#define UIC_ETHx UIC_MASK(ETH_IRQ_NUM(0)) +#endif + +/* + * Define a default version for UIC_ETHxB for non 440GX so that we can + * use common code for all 4xx variants + */ +#if !defined(UIC_ETHxB) +#define UIC_ETHxB 0 +#endif + +#define UIC_MAL_SERR UIC_MASK(VECNUM_MAL_SERR) +#define UIC_MAL_TXDE UIC_MASK(VECNUM_MAL_TXDE) +#define UIC_MAL_RXDE UIC_MASK(VECNUM_MAL_RXDE) +#define UIC_MAL_TXEOB UIC_MASK(VECNUM_MAL_TXEOB) +#define UIC_MAL_RXEOB UIC_MASK(VECNUM_MAL_RXEOB) + +#define MAL_UIC_ERR (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) +#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) + +/* + * We have 3 different interrupt types: + * - MAL interrupts indicating successful transfer + * - MAL error interrupts indicating MAL related errors + * - EMAC interrupts indicating EMAC related errors + * + * All those interrupts can be on different UIC's, but since + * now at least all interrupts from one type are on the same + * UIC. Only exception is 440GX where the EMAC interrupts are + * spread over two UIC's! + */ +#if defined(CONFIG_440GX) +#define UIC_BASE_MAL UIC1_DCR_BASE +#define UIC_BASE_MAL_ERR UIC2_DCR_BASE +#define UIC_BASE_EMAC UIC2_DCR_BASE +#define UIC_BASE_EMAC_B UIC3_DCR_BASE +#else +#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10)) +#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10)) +#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) +#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) +#endif + +#undef INFO_4XX_ENET + +#define BI_PHYMODE_NONE 0 +#define BI_PHYMODE_ZMII 1 +#define BI_PHYMODE_RGMII 2 +#define BI_PHYMODE_GMII 3 +#define BI_PHYMODE_RTBI 4 +#define BI_PHYMODE_TBI 5 +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) +#define BI_PHYMODE_SMII 6 +#define BI_PHYMODE_MII 7 +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define BI_PHYMODE_RMII 8 +#endif +#endif +#define BI_PHYMODE_SGMII 9 + +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) +#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) +#endif + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define SDR0_ETH_CFG_CLK_SEL_V(n) (0x01 << (8 + n)) +#endif + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define MAL_RX_CHAN_MUL 8 /* 460EX/GT uses MAL channel 8 for EMAC1 */ +#else +#define MAL_RX_CHAN_MUL 1 +#endif + +/*--------------------------------------------------------------------+ + * Fixed PHY (PHY-less) support for Ethernet Ports. + *--------------------------------------------------------------------*/ + +/* + * Some boards do not have a PHY for each ethernet port. These ports + * are known as Fixed PHY (or PHY-less) ports. For such ports, set + * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and + * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and + * duplex should be for these ports in the board configuration + * file. + * + * For Example: + * #define CONFIG_FIXED_PHY 0xFFFFFFFF + * + * #define CONFIG_PHY_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY1_ADDR 1 + * #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY + * #define CONFIG_PHY3_ADDR 3 + * + * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \ + * {devnum, speed, duplex}, + * + * #define CONFIG_SYS_FIXED_PHY_PORTS \ + * CONFIG_SYS_FIXED_PHY_PORT(0,1000,FULL) \ + * CONFIG_SYS_FIXED_PHY_PORT(2,100,HALF) + */ + +#ifndef CONFIG_FIXED_PHY +#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */ +#endif + +#ifndef CONFIG_SYS_FIXED_PHY_PORTS +#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */ +#endif + +struct fixed_phy_port { + unsigned int devnum; /* ethernet port */ + unsigned int speed; /* specified speed 10,100 or 1000 */ + unsigned int duplex; /* specified duplex FULL or HALF */ +}; + +static const struct fixed_phy_port fixed_phy_port[] = { + CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */ +}; + +/*-----------------------------------------------------------------------------+ + * Global variables. TX and RX descriptors and buffers. + *-----------------------------------------------------------------------------*/ + +/* + * Get count of EMAC devices (doesn't have to be the max. possible number + * supported by the cpu) + * + * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the + * EMAC count is possible. As it is needed for the Kilauea/Haleakala + * 405EX/405EXr eval board, using the same binary. + */ +#if defined(CONFIG_BOARD_EMAC_COUNT) +#define LAST_EMAC_NUM board_emac_count() +#else /* CONFIG_BOARD_EMAC_COUNT */ +#if defined(CONFIG_HAS_ETH3) +#define LAST_EMAC_NUM 4 +#elif defined(CONFIG_HAS_ETH2) +#define LAST_EMAC_NUM 3 +#elif defined(CONFIG_HAS_ETH1) +#define LAST_EMAC_NUM 2 +#else +#define LAST_EMAC_NUM 1 +#endif +#endif /* CONFIG_BOARD_EMAC_COUNT */ + +/* normal boards start with EMAC0 */ +#if !defined(CONFIG_EMAC_NR_START) +#define CONFIG_EMAC_NR_START 0 +#endif + +#define MAL_RX_DESC_SIZE 2048 +#define MAL_TX_DESC_SIZE 2048 +#define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE) + +/*-----------------------------------------------------------------------------+ + * Prototypes and externals. + *-----------------------------------------------------------------------------*/ +static void enet_rcv (struct eth_device *dev, unsigned long malisr); + +int enetInt (struct eth_device *dev); +static void mal_err (struct eth_device *dev, unsigned long isr, + unsigned long uic, unsigned long maldef, + unsigned long mal_errr); +static void emac_err (struct eth_device *dev, unsigned long isr); + +extern int phy_setup_aneg (char *devname, unsigned char addr); +extern int emac4xx_miiphy_read (const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +extern int emac4xx_miiphy_write (const char *devname, unsigned char addr, + unsigned char reg, unsigned short value); + +int board_emac_count(void); + +static void emac_loopback_enable(EMAC_4XX_HW_PST hw_p) +{ +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_405EX) + u32 val; + + mfsdr(SDR0_MFR, val); + val |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); + mtsdr(SDR0_MFR, val); +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + u32 val; + + mfsdr(SDR0_ETH_CFG, val); + val |= SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); + mtsdr(SDR0_ETH_CFG, val); +#endif +} + +static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) +{ +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_405EX) + u32 val; + + mfsdr(SDR0_MFR, val); + val &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum); + mtsdr(SDR0_MFR, val); +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + u32 val; + + mfsdr(SDR0_ETH_CFG, val); + val &= ~SDR0_ETH_CFG_CLK_SEL_V(hw_p->devnum); + mtsdr(SDR0_ETH_CFG, val); +#endif +} + +/*-----------------------------------------------------------------------------+ +| ppc_4xx_eth_halt +| Disable MAL channel, and EMACn ++-----------------------------------------------------------------------------*/ +static void ppc_4xx_eth_halt (struct eth_device *dev) +{ + EMAC_4XX_HW_PST hw_p = dev->priv; + u32 val = 10000; + + out_be32((void *)EMAC0_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ + + /* 1st reset MAL channel */ + /* Note: writing a 0 to a channel has no effect */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> (hw_p->devnum * 2))); +#else + mtdcr (MAL0_TXCARR, (MAL_CR_MMSR >> hw_p->devnum)); +#endif + mtdcr (MAL0_RXCARR, (MAL_CR_MMSR >> hw_p->devnum)); + + /* wait for reset */ + while (mfdcr (MAL0_RXCASR) & (MAL_CR_MMSR >> hw_p->devnum)) { + udelay (1000); /* Delay 1 MS so as not to hammer the register */ + val--; + if (val == 0) + break; + } + + /* provide clocks for EMAC internal loopback */ + emac_loopback_enable(hw_p); + + /* EMAC RESET */ + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); + + /* remove clocks for EMAC internal loopback */ + emac_loopback_disable(hw_p); + +#ifndef CONFIG_NETCONSOLE + hw_p->print_speed = 1; /* print speed message again next time */ +#endif + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ + mfsdr(SDR0_ETH_CFG, val); + val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); + mtsdr(SDR0_ETH_CFG, val); +#endif + + return; +} + +#if defined (CONFIG_440GX) +int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) +{ + unsigned long pfc1; + unsigned long zmiifer; + unsigned long rmiifer; + + mfsdr(SDR0_PFC1, pfc1); + pfc1 = SDR0_PFC1_EPS_DECODE(pfc1); + + zmiifer = 0; + rmiifer = 0; + + switch (pfc1) { + case 1: + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_ZMII; + bis->bi_phymode[3] = BI_PHYMODE_ZMII; + break; + case 2: + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_ZMII; + bis->bi_phymode[3] = BI_PHYMODE_ZMII; + break; + case 3: + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + bis->bi_phymode[2] = BI_PHYMODE_RGMII; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 4: + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (2); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V (3); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_RGMII; + bis->bi_phymode[3] = BI_PHYMODE_RGMII; + break; + case 5: + zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V (2); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_ZMII; + bis->bi_phymode[3] = BI_PHYMODE_RGMII; + break; + case 6: + zmiifer |= ZMII_FER_SMII << ZMII_FER_V (0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V (1); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_RGMII; + break; + case 0: + default: + zmiifer = ZMII_FER_MII << ZMII_FER_V(devnum); + rmiifer = 0x0; + bis->bi_phymode[0] = BI_PHYMODE_ZMII; + bis->bi_phymode[1] = BI_PHYMODE_ZMII; + bis->bi_phymode[2] = BI_PHYMODE_ZMII; + bis->bi_phymode[3] = BI_PHYMODE_ZMII; + break; + } + + /* Ensure we setup mdio for this devnum and ONLY this devnum */ + zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); + + out_be32((void *)ZMII0_FER, zmiifer); + out_be32((void *)RGMII_FER, rmiifer); + + return ((int)pfc1); +} +#endif /* CONFIG_440_GX */ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) +{ + unsigned long zmiifer=0x0; + unsigned long pfc1; + + mfsdr(SDR0_PFC1, pfc1); + pfc1 &= SDR0_PFC1_SELECT_MASK; + + switch (pfc1) { + case SDR0_PFC1_SELECT_CONFIG_2: + /* 1 x GMII port */ + out_be32((void *)ZMII0_FER, 0x00); + out_be32((void *)RGMII_FER, 0x00000037); + bis->bi_phymode[0] = BI_PHYMODE_GMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case SDR0_PFC1_SELECT_CONFIG_4: + /* 2 x RGMII ports */ + out_be32((void *)ZMII0_FER, 0x00); + out_be32((void *)RGMII_FER, 0x00000055); + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + break; + case SDR0_PFC1_SELECT_CONFIG_6: + /* 2 x SMII ports */ + out_be32((void *)ZMII0_FER, + ((ZMII_FER_SMII) << ZMII_FER_V(0)) | + ((ZMII_FER_SMII) << ZMII_FER_V(1))); + out_be32((void *)RGMII_FER, 0x00000000); + bis->bi_phymode[0] = BI_PHYMODE_SMII; + bis->bi_phymode[1] = BI_PHYMODE_SMII; + break; + case SDR0_PFC1_SELECT_CONFIG_1_2: + /* only 1 x MII supported */ + out_be32((void *)ZMII0_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); + out_be32((void *)RGMII_FER, 0x00000000); + bis->bi_phymode[0] = BI_PHYMODE_MII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + default: + break; + } + + /* Ensure we setup mdio for this devnum and ONLY this devnum */ + zmiifer = in_be32((void *)ZMII0_FER); + zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); + out_be32((void *)ZMII0_FER, zmiifer); + + return ((int)0x0); +} +#endif /* CONFIG_440EPX */ + +#if defined(CONFIG_405EX) +int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) +{ + u32 rgmiifer = 0; + + /* + * The 405EX(r)'s RGMII bridge can operate in one of several + * modes, only one of which (2 x RGMII) allows the + * simultaneous use of both EMACs on the 405EX. + */ + + switch (CONFIG_EMAC_PHY_MODE) { + + case EMAC_PHY_MODE_NONE: + /* No ports */ + rgmiifer |= RGMII_FER_DIS << 0; + rgmiifer |= RGMII_FER_DIS << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_NONE; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case EMAC_PHY_MODE_NONE_RGMII: + /* 1 x RGMII port on channel 0 */ + rgmiifer |= RGMII_FER_RGMII << 0; + rgmiifer |= RGMII_FER_DIS << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case EMAC_PHY_MODE_RGMII_NONE: + /* 1 x RGMII port on channel 1 */ + rgmiifer |= RGMII_FER_DIS << 0; + rgmiifer |= RGMII_FER_RGMII << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_NONE; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + break; + case EMAC_PHY_MODE_RGMII_RGMII: + /* 2 x RGMII ports */ + rgmiifer |= RGMII_FER_RGMII << 0; + rgmiifer |= RGMII_FER_RGMII << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + break; + case EMAC_PHY_MODE_NONE_GMII: + /* 1 x GMII port on channel 0 */ + rgmiifer |= RGMII_FER_GMII << 0; + rgmiifer |= RGMII_FER_DIS << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_GMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case EMAC_PHY_MODE_NONE_MII: + /* 1 x MII port on channel 0 */ + rgmiifer |= RGMII_FER_MII << 0; + rgmiifer |= RGMII_FER_DIS << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_MII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + break; + case EMAC_PHY_MODE_GMII_NONE: + /* 1 x GMII port on channel 1 */ + rgmiifer |= RGMII_FER_DIS << 0; + rgmiifer |= RGMII_FER_GMII << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_NONE; + bis->bi_phymode[1] = BI_PHYMODE_GMII; + break; + case EMAC_PHY_MODE_MII_NONE: + /* 1 x MII port on channel 1 */ + rgmiifer |= RGMII_FER_DIS << 0; + rgmiifer |= RGMII_FER_MII << 4; + out_be32((void *)RGMII_FER, rgmiifer); + bis->bi_phymode[0] = BI_PHYMODE_NONE; + bis->bi_phymode[1] = BI_PHYMODE_MII; + break; + default: + break; + } + + /* Ensure we setup mdio for this devnum and ONLY this devnum */ + rgmiifer = in_be32((void *)RGMII_FER); + rgmiifer |= (1 << (19-devnum)); + out_be32((void *)RGMII_FER, rgmiifer); + + return ((int)0x0); +} +#endif /* CONFIG_405EX */ + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) +{ + u32 eth_cfg; + u32 zmiifer; /* ZMII0_FER reg. */ + u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ + u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ + int mode; + + zmiifer = 0; + rmiifer = 0; + rmiifer1 = 0; + +#if defined(CONFIG_460EX) + mode = 9; + mfsdr(SDR0_ETH_CFG, eth_cfg); + if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0)) + mode = 11; /* config SGMII */ +#else + mode = 10; + mfsdr(SDR0_ETH_CFG, eth_cfg); + if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0) && + ((eth_cfg & SDR0_ETH_CFG_SGMII2_ENABLE) > 0)) + mode = 12; /* config SGMII */ +#endif + + /* TODO: + * NOTE: 460GT has 2 RGMII bridge cores: + * emac0 ------ RGMII0_BASE + * | + * emac1 -----+ + * + * emac2 ------ RGMII1_BASE + * | + * emac3 -----+ + * + * 460EX has 1 RGMII bridge core: + * and RGMII1_BASE is disabled + * emac0 ------ RGMII0_BASE + * | + * emac1 -----+ + */ + + /* + * Right now only 2*RGMII is supported. Please extend when needed. + * sr - 2008-02-19 + * Add SGMII support. + * vg - 2008-07-28 + */ + switch (mode) { + case 1: + /* 1 MII - 460EX */ + /* GMC0 EMAC4_0, ZMII Bridge */ + zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); + bis->bi_phymode[0] = BI_PHYMODE_MII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 2: + /* 2 MII - 460GT */ + /* GMC0 EMAC4_0, GMC1 EMAC4_2, ZMII Bridge */ + zmiifer |= ZMII_FER_MII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_MII << ZMII_FER_V(2); + bis->bi_phymode[0] = BI_PHYMODE_MII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + bis->bi_phymode[2] = BI_PHYMODE_MII; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 3: + /* 2 RMII - 460EX */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); + bis->bi_phymode[0] = BI_PHYMODE_RMII; + bis->bi_phymode[1] = BI_PHYMODE_RMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 4: + /* 4 RMII - 460GT */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC1 EMAC4_2, GMC1, EMAC4_3 */ + /* ZMII Bridge */ + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(1); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(2); + zmiifer |= ZMII_FER_RMII << ZMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_RMII; + bis->bi_phymode[1] = BI_PHYMODE_RMII; + bis->bi_phymode[2] = BI_PHYMODE_RMII; + bis->bi_phymode[3] = BI_PHYMODE_RMII; + break; + case 5: + /* 2 SMII - 460EX */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, ZMII Bridge */ + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); + bis->bi_phymode[0] = BI_PHYMODE_SMII; + bis->bi_phymode[1] = BI_PHYMODE_SMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 6: + /* 4 SMII - 460GT */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, GMC0 EMAC4_3, GMC0 EMAC4_3 */ + /* ZMII Bridge */ + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(0); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(1); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(2); + zmiifer |= ZMII_FER_SMII << ZMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_SMII; + bis->bi_phymode[1] = BI_PHYMODE_SMII; + bis->bi_phymode[2] = BI_PHYMODE_SMII; + bis->bi_phymode[3] = BI_PHYMODE_SMII; + break; + case 7: + /* This is the default mode that we want for board bringup - Maple */ + /* 1 GMII - 460EX */ + /* GMC0 EMAC4_0, RGMII Bridge 0 */ + rmiifer |= RGMII_FER_MDIO(0); + + if (devnum == 0) { + rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ + bis->bi_phymode[0] = BI_PHYMODE_GMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + } else { + rmiifer |= RGMII_FER_GMII << RGMII_FER_V(3); /* CH1CFG - EMAC1 */ + bis->bi_phymode[0] = BI_PHYMODE_NONE; + bis->bi_phymode[1] = BI_PHYMODE_GMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + } + break; + case 8: + /* 2 GMII - 460GT */ + /* GMC0 EMAC4_0, RGMII Bridge 0 */ + /* GMC1 EMAC4_2, RGMII Bridge 1 */ + rmiifer |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC0 */ + rmiifer1 |= RGMII_FER_GMII << RGMII_FER_V(2); /* CH0CFG - EMAC2 */ + rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ + rmiifer1 |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC2 */ + + bis->bi_phymode[0] = BI_PHYMODE_GMII; + bis->bi_phymode[1] = BI_PHYMODE_NONE; + bis->bi_phymode[2] = BI_PHYMODE_GMII; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 9: + /* 2 RGMII - 460EX */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); + rmiifer |= RGMII_FER_MDIO(0); /* enable MDIO - EMAC0 */ + + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 10: + /* 4 RGMII - 460GT */ + /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ + /* GMC1 EMAC4_2, GMC1 EMAC4_3, RGMII Bridge 1 */ + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(2); + rmiifer |= RGMII_FER_RGMII << RGMII_FER_V(3); + rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(2); + rmiifer1 |= RGMII_FER_RGMII << RGMII_FER_V(3); + bis->bi_phymode[0] = BI_PHYMODE_RGMII; + bis->bi_phymode[1] = BI_PHYMODE_RGMII; + bis->bi_phymode[2] = BI_PHYMODE_RGMII; + bis->bi_phymode[3] = BI_PHYMODE_RGMII; + break; + case 11: + /* 2 SGMII - 460EX */ + bis->bi_phymode[0] = BI_PHYMODE_SGMII; + bis->bi_phymode[1] = BI_PHYMODE_SGMII; + bis->bi_phymode[2] = BI_PHYMODE_NONE; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + case 12: + /* 3 SGMII - 460GT */ + bis->bi_phymode[0] = BI_PHYMODE_SGMII; + bis->bi_phymode[1] = BI_PHYMODE_SGMII; + bis->bi_phymode[2] = BI_PHYMODE_SGMII; + bis->bi_phymode[3] = BI_PHYMODE_NONE; + break; + default: + break; + } + + /* Set EMAC for MDIO */ + mfsdr(SDR0_ETH_CFG, eth_cfg); + eth_cfg |= SDR0_ETH_CFG_MDIO_SEL_EMAC0; + mtsdr(SDR0_ETH_CFG, eth_cfg); + + out_be32((void *)RGMII_FER, rmiifer); +#if defined(CONFIG_460GT) + out_be32((void *)RGMII_FER + RGMII1_BASE_OFFSET, rmiifer1); +#endif + + /* bypass the TAHOE0/TAHOE1 cores for U-Boot */ + mfsdr(SDR0_ETH_CFG, eth_cfg); + eth_cfg |= (SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); + mtsdr(SDR0_ETH_CFG, eth_cfg); + + return 0; +} +#endif /* CONFIG_460EX || CONFIG_460GT */ + +static inline void *malloc_aligned(u32 size, u32 align) +{ + return (void *)(((u32)malloc(size + align) + align - 1) & + ~(align - 1)); +} + +static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) +{ + int i; + unsigned long reg = 0; + unsigned long msr; + unsigned long speed; + unsigned long duplex; + unsigned long failsafe; + unsigned mode_reg; + unsigned short devnum; + unsigned short reg_short; +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + u32 opbfreq; + sys_info_t sysinfo; +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + __maybe_unused int ethgroup = -1; +#endif +#endif + u32 bd_cached; + u32 bd_uncached = 0; +#ifdef CONFIG_4xx_DCACHE + static u32 last_used_ea = 0; +#endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + int rgmii_channel; +#endif + + EMAC_4XX_HW_PST hw_p = dev->priv; + + /* before doing anything, figure out if we have a MAC address */ + /* if not, bail */ + if (memcmp (dev->enetaddr, "\0\0\0\0\0\0", 6) == 0) { + printf("ERROR: ethaddr not set!\n"); + return -1; + } + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + /* Need to get the OPB frequency so we can access the PHY */ + get_sys_info (&sysinfo); +#endif + + msr = mfmsr (); + mtmsr (msr & ~(MSR_EE)); /* disable interrupts */ + + devnum = hw_p->devnum; + +#ifdef INFO_4XX_ENET + /* AS.HARNOIS + * We should have : + * hw_p->stats.pkts_handled <= hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX + * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it + * is possible that new packets (without relationship with + * current transfer) have got the time to arrived before + * netloop calls eth_halt + */ + printf ("About preceeding transfer (eth%d):\n" + "- Sent packet number %d\n" + "- Received packet number %d\n" + "- Handled packet number %d\n", + hw_p->devnum, + hw_p->stats.pkts_tx, + hw_p->stats.pkts_rx, hw_p->stats.pkts_handled); + + hw_p->stats.pkts_tx = 0; + hw_p->stats.pkts_rx = 0; + hw_p->stats.pkts_handled = 0; + hw_p->print_speed = 1; /* print speed message again next time */ +#endif + + hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */ + hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */ + + hw_p->rx_slot = 0; /* MAL Receive Slot */ + hw_p->rx_i_index = 0; /* Receive Interrupt Queue Index */ + hw_p->rx_u_index = 0; /* Receive User Queue Index */ + + hw_p->tx_slot = 0; /* MAL Transmit Slot */ + hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */ + hw_p->tx_u_index = 0; /* Transmit User Queue Index */ + +#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) + /* set RMII mode */ + /* NOTE: 440GX spec states that mode is mutually exclusive */ + /* NOTE: Therefore, disable all other EMACS, since we handle */ + /* NOTE: only one emac at a time */ + reg = 0; + out_be32((void *)ZMII0_FER, 0); + udelay (100); + +#if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + out_be32((void *)ZMII0_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); +#elif defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) + ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); +#endif + + out_be32((void *)ZMII0_SSR, ZMII0_SSR_SP << ZMII0_SSR_V(devnum)); +#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ +#if defined(CONFIG_405EX) + ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); +#endif + + sync(); + + /* provide clocks for EMAC internal loopback */ + emac_loopback_enable(hw_p); + + /* EMAC RESET */ + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); + + /* remove clocks for EMAC internal loopback */ + emac_loopback_disable(hw_p); + + failsafe = 1000; + while ((in_be32((void *)EMAC0_MR0 + hw_p->hw_addr) & (EMAC_MR0_SRST)) && failsafe) { + udelay (1000); + failsafe--; + } + if (failsafe <= 0) + printf("\nProblem resetting EMAC!\n"); + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + /* Whack the M1 register */ + mode_reg = 0x0; + mode_reg &= ~0x00000038; + opbfreq = sysinfo.freqOPB / 1000000; + if (opbfreq <= 50); + else if (opbfreq <= 66) + mode_reg |= EMAC_MR1_OBCI_66; + else if (opbfreq <= 83) + mode_reg |= EMAC_MR1_OBCI_83; + else if (opbfreq <= 100) + mode_reg |= EMAC_MR1_OBCI_100; + else + mode_reg |= EMAC_MR1_OBCI_GT100; + + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); +#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ + +#if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \ + defined(CONFIG_GPCS_PHY2_ADDR) || defined(CONFIG_GPCS_PHY3_ADDR) + if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { + /* + * In SGMII mode, GPCS access is needed for + * communication with the internal SGMII SerDes. + */ + switch (devnum) { +#if defined(CONFIG_GPCS_PHY_ADDR) + case 0: + reg = CONFIG_GPCS_PHY_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY1_ADDR) + case 1: + reg = CONFIG_GPCS_PHY1_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY2_ADDR) + case 2: + reg = CONFIG_GPCS_PHY2_ADDR; + break; +#endif +#if defined(CONFIG_GPCS_PHY3_ADDR) + case 3: + reg = CONFIG_GPCS_PHY3_ADDR; + break; +#endif + } + + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); + mode_reg |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_IPPA_SET(reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); + + /* Configure GPCS interface to recommended setting for SGMII */ + miiphy_reset(dev->name, reg); + miiphy_write(dev->name, reg, 0x04, 0x8120); /* AsymPause, FDX */ + miiphy_write(dev->name, reg, 0x07, 0x2801); /* msg_pg, toggle */ + miiphy_write(dev->name, reg, 0x00, 0x0140); /* 1Gbps, FDX */ + } +#endif /* defined(CONFIG_GPCS_PHY_ADDR) */ + + /* wait for PHY to complete auto negotiation */ + reg_short = 0; + switch (devnum) { + case 0: + reg = CONFIG_PHY_ADDR; + break; +#if defined (CONFIG_PHY1_ADDR) + case 1: + reg = CONFIG_PHY1_ADDR; + break; +#endif +#if defined (CONFIG_PHY2_ADDR) + case 2: + reg = CONFIG_PHY2_ADDR; + break; +#endif +#if defined (CONFIG_PHY3_ADDR) + case 3: + reg = CONFIG_PHY3_ADDR; + break; +#endif + default: + reg = CONFIG_PHY_ADDR; + break; + } + + bis->bi_phynum[devnum] = reg; + + if (reg == CONFIG_FIXED_PHY) + goto get_speed; + +#if defined(CONFIG_PHY_RESET) + /* + * Reset the phy, only if its the first time through + * otherwise, just check the speeds & feeds + */ + if (hw_p->first_init == 0) { +#if defined(CONFIG_M88E1111_PHY) + miiphy_write (dev->name, reg, 0x14, 0x0ce3); + miiphy_write (dev->name, reg, 0x18, 0x4101); + miiphy_write (dev->name, reg, 0x09, 0x0e00); + miiphy_write (dev->name, reg, 0x04, 0x01e1); +#if defined(CONFIG_M88E1111_DISABLE_FIBER) + miiphy_read(dev->name, reg, 0x1b, ®_short); + reg_short |= 0x8000; + miiphy_write(dev->name, reg, 0x1b, reg_short); +#endif +#endif +#if defined(CONFIG_M88E1112_PHY) + if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) { + /* + * Marvell 88E1112 PHY needs to have the SGMII MAC + * interace (page 2) properly configured to + * communicate with the 460EX/GT GPCS interface. + */ + + /* Set access to Page 2 */ + miiphy_write(dev->name, reg, 0x16, 0x0002); + + miiphy_write(dev->name, reg, 0x00, 0x0040); /* 1Gbps */ + miiphy_read(dev->name, reg, 0x1a, ®_short); + reg_short |= 0x8000; /* bypass Auto-Negotiation */ + miiphy_write(dev->name, reg, 0x1a, reg_short); + miiphy_reset(dev->name, reg); /* reset MAC interface */ + + /* Reset access to Page 0 */ + miiphy_write(dev->name, reg, 0x16, 0x0000); + } +#endif /* defined(CONFIG_M88E1112_PHY) */ + miiphy_reset (dev->name, reg); + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + +#if defined(CONFIG_CIS8201_PHY) + /* + * Cicada 8201 PHY needs to have an extended register whacked + * for RGMII mode. + */ + if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) { +#if defined(CONFIG_CIS8201_SHORT_ETCH) + miiphy_write (dev->name, reg, 23, 0x1300); +#else + miiphy_write (dev->name, reg, 23, 0x1000); +#endif + /* + * Vitesse VSC8201/Cicada CIS8201 errata: + * Interoperability problem with Intel 82547EI phys + * This work around (provided by Vitesse) changes + * the default timer convergence from 8ms to 12ms + */ + miiphy_write (dev->name, reg, 0x1f, 0x2a30); + miiphy_write (dev->name, reg, 0x08, 0x0200); + miiphy_write (dev->name, reg, 0x1f, 0x52b5); + miiphy_write (dev->name, reg, 0x02, 0x0004); + miiphy_write (dev->name, reg, 0x01, 0x0671); + miiphy_write (dev->name, reg, 0x00, 0x8fae); + miiphy_write (dev->name, reg, 0x1f, 0x2a30); + miiphy_write (dev->name, reg, 0x08, 0x0000); + miiphy_write (dev->name, reg, 0x1f, 0x0000); + /* end Vitesse/Cicada errata */ + } +#endif /* defined(CONFIG_CIS8201_PHY) */ + +#if defined(CONFIG_ET1011C_PHY) + /* + * Agere ET1011c PHY needs to have an extended register whacked + * for RGMII mode. + */ + if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) { + miiphy_read (dev->name, reg, 0x16, ®_short); + reg_short &= ~(0x7); + reg_short |= 0x6; /* RGMII DLL Delay*/ + miiphy_write (dev->name, reg, 0x16, reg_short); + + miiphy_read (dev->name, reg, 0x17, ®_short); + reg_short &= ~(0x40); + miiphy_write (dev->name, reg, 0x17, reg_short); + + miiphy_write(dev->name, reg, 0x1c, 0x74f0); + } +#endif /* defined(CONFIG_ET1011C_PHY) */ + +#endif /* defined(CONFIG_440GX) ... */ + /* Start/Restart autonegotiation */ + phy_setup_aneg (dev->name, reg); + udelay (1000); + } +#endif /* defined(CONFIG_PHY_RESET) */ + + miiphy_read (dev->name, reg, MII_BMSR, ®_short); + + /* + * Wait if PHY is capable of autonegotiation and autonegotiation is not complete + */ + if ((reg_short & BMSR_ANEGCAPABLE) + && !(reg_short & BMSR_ANEGCOMPLETE)) { + puts ("Waiting for PHY auto negotiation to complete"); + i = 0; + while (!(reg_short & BMSR_ANEGCOMPLETE)) { + /* + * Timeout reached ? + */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts (" TIMEOUT !\n"); + break; + } + + if ((i++ % 1000) == 0) { + putc ('.'); + } + udelay (1000); /* 1 ms */ + miiphy_read (dev->name, reg, MII_BMSR, ®_short); + } + puts (" done\n"); + udelay (500000); /* another 500 ms (results in faster booting) */ + } + +get_speed: + if (reg == CONFIG_FIXED_PHY) { + for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) { + if (devnum == fixed_phy_port[i].devnum) { + speed = fixed_phy_port[i].speed; + duplex = fixed_phy_port[i].duplex; + break; + } + } + + if (i == ARRAY_SIZE(fixed_phy_port)) { + printf("ERROR: PHY (%s) not configured correctly!\n", + dev->name); + return -1; + } + } else { + speed = miiphy_speed(dev->name, reg); + duplex = miiphy_duplex(dev->name, reg); + } + + if (hw_p->print_speed) { + hw_p->print_speed = 0; + printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n", + (int) speed, (duplex == HALF) ? "HALF" : "FULL", + hw_p->devnum); + } + +#if defined(CONFIG_440) && \ + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ + !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \ + !defined(CONFIG_460EX) && !defined(CONFIG_460GT) +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) + mfsdr(SDR0_MFR, reg); + if (speed == 100) { + reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_100M; + } else { + reg = (reg & ~SDR0_MFR_ZMII_MODE_MASK) | SDR0_MFR_ZMII_MODE_RMII_10M; + } + mtsdr(SDR0_MFR, reg); +#endif + + /* Set ZMII/RGMII speed according to the phy link speed */ + reg = in_be32((void *)ZMII0_SSR); + if ( (speed == 100) || (speed == 1000) ) + out_be32((void *)ZMII0_SSR, reg | (ZMII0_SSR_SP << ZMII0_SSR_V (devnum))); + else + out_be32((void *)ZMII0_SSR, reg & (~(ZMII0_SSR_SP << ZMII0_SSR_V (devnum)))); + + if ((devnum == 2) || (devnum == 3)) { + if (speed == 1000) + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); + else if (speed == 100) + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); + else if (speed == 10) + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); + else { + printf("Error in RGMII Speed\n"); + return -1; + } + out_be32((void *)RGMII_SSR, reg); + } +#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ + +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + if (devnum >= 2) + rgmii_channel = devnum - 2; + else + rgmii_channel = devnum; + + if (speed == 1000) + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); + else if (speed == 100) + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); + else if (speed == 10) + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); + else { + printf("Error in RGMII Speed\n"); + return -1; + } + out_be32((void *)RGMII_SSR, reg); +#if defined(CONFIG_460GT) + if ((devnum == 2) || (devnum == 3)) + out_be32((void *)RGMII_SSR + RGMII1_BASE_OFFSET, reg); +#endif +#endif + + /* set the Mal configuration reg */ +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | + MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000); +#else + mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); + /* Errata 1.12: MAL_1 -- Disable MAL bursting */ + if (get_pvr() == PVR_440GP_RB) { + mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); + } +#endif + + /* + * Malloc MAL buffer desciptors, make sure they are + * aligned on cache line boundary size + * (401/403/IOP480 = 16, 405 = 32) + * and doesn't cross cache block boundaries. + */ + if (hw_p->first_init == 0) { + debug("*** Allocating descriptor memory ***\n"); + + bd_cached = (u32)malloc_aligned(MAL_ALLOC_SIZE, 4096); + if (!bd_cached) { + printf("%s: Error allocating MAL descriptor buffers!\n", __func__); + return -1; + } + +#ifdef CONFIG_4xx_DCACHE + flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE); + if (!last_used_ea) +#if defined(CONFIG_SYS_MEM_TOP_HIDE) + bd_uncached = bis->bi_memsize + CONFIG_SYS_MEM_TOP_HIDE; +#else + bd_uncached = bis->bi_memsize; +#endif + else + bd_uncached = last_used_ea + MAL_ALLOC_SIZE; + + last_used_ea = bd_uncached; + program_tlb(bd_cached, bd_uncached, MAL_ALLOC_SIZE, + TLB_WORD2_I_ENABLE); +#else + bd_uncached = bd_cached; +#endif + hw_p->tx_phys = bd_cached; + hw_p->rx_phys = bd_cached + MAL_TX_DESC_SIZE; + hw_p->tx = (mal_desc_t *)(bd_uncached); + hw_p->rx = (mal_desc_t *)(bd_uncached + MAL_TX_DESC_SIZE); + debug("hw_p->tx=%p, hw_p->rx=%p\n", hw_p->tx, hw_p->rx); + } + + for (i = 0; i < NUM_TX_BUFF; i++) { + hw_p->tx[i].ctrl = 0; + hw_p->tx[i].data_len = 0; + if (hw_p->first_init == 0) + hw_p->txbuf_ptr = malloc_aligned(MAL_ALLOC_SIZE, + L1_CACHE_BYTES); + hw_p->tx[i].data_ptr = hw_p->txbuf_ptr; + if ((NUM_TX_BUFF - 1) == i) + hw_p->tx[i].ctrl |= MAL_TX_CTRL_WRAP; + hw_p->tx_run[i] = -1; + debug("TX_BUFF %d @ 0x%08x\n", i, (u32)hw_p->tx[i].data_ptr); + } + + for (i = 0; i < NUM_RX_BUFF; i++) { + hw_p->rx[i].ctrl = 0; + hw_p->rx[i].data_len = 0; + hw_p->rx[i].data_ptr = (char *)NetRxPackets[i]; + if ((NUM_RX_BUFF - 1) == i) + hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP; + hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; + hw_p->rx_ready[i] = -1; + debug("RX_BUFF %d @ 0x%08x\n", i, (u32)hw_p->rx[i].data_ptr); + } + + reg = 0x00000000; + + reg |= dev->enetaddr[0]; /* set high address */ + reg = reg << 8; + reg |= dev->enetaddr[1]; + + out_be32((void *)EMAC0_IAH + hw_p->hw_addr, reg); + + reg = 0x00000000; + reg |= dev->enetaddr[2]; /* set low address */ + reg = reg << 8; + reg |= dev->enetaddr[3]; + reg = reg << 8; + reg |= dev->enetaddr[4]; + reg = reg << 8; + reg |= dev->enetaddr[5]; + + out_be32((void *)EMAC0_IAL + hw_p->hw_addr, reg); + + switch (devnum) { + case 1: + /* setup MAL tx & rx channel pointers */ +#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); +#else + mtdcr (MAL0_TXCTP1R, hw_p->tx_phys); +#endif +#if defined(CONFIG_440) + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); +#endif + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + mtdcr (MAL0_RXCTP8R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS8, ENET_MAX_MTU_ALIGNED / 16); +#else + mtdcr (MAL0_RXCTP1R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS1, ENET_MAX_MTU_ALIGNED / 16); +#endif + break; +#if defined (CONFIG_440GX) + case 2: + /* setup MAL tx & rx channel pointers */ + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP2R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS2, ENET_MAX_MTU_ALIGNED / 16); + break; + case 3: + /* setup MAL tx & rx channel pointers */ + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_RXCTP3R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS3, ENET_MAX_MTU_ALIGNED / 16); + break; +#endif /* CONFIG_440GX */ +#if defined (CONFIG_460GT) + case 2: + /* setup MAL tx & rx channel pointers */ + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP2R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP16R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS16, ENET_MAX_MTU_ALIGNED / 16); + break; + case 3: + /* setup MAL tx & rx channel pointers */ + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); + mtdcr (MAL0_TXCTP3R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP24R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS24, ENET_MAX_MTU_ALIGNED / 16); + break; +#endif /* CONFIG_460GT */ + case 0: + default: + /* setup MAL tx & rx channel pointers */ +#if defined(CONFIG_440) + mtdcr (MAL0_TXBADDR, 0x0); + mtdcr (MAL0_RXBADDR, 0x0); +#endif + mtdcr (MAL0_TXCTP0R, hw_p->tx_phys); + mtdcr (MAL0_RXCTP0R, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (MAL0_RCBS0, ENET_MAX_MTU_ALIGNED / 16); + break; + } + + /* Enable MAL transmit and receive channels */ +#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (hw_p->devnum*2))); +#else + mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); +#endif + mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); + + /* set transmit enable & receive enable */ + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_TXE | EMAC_MR0_RXE); + + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); + + /* set rx-/tx-fifo size */ + mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE; + + /* set speed */ + if (speed == _1000BASET) { +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) + unsigned long pfc1; + + mfsdr (SDR0_PFC1, pfc1); + pfc1 |= SDR0_PFC1_EM_1000; + mtsdr (SDR0_PFC1, pfc1); +#endif + mode_reg = mode_reg | EMAC_MR1_MF_1000MBPS | EMAC_MR1_IST; + } else if (speed == _100BASET) + mode_reg = mode_reg | EMAC_MR1_MF_100MBPS | EMAC_MR1_IST; + else + mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ + if (duplex == FULL) + mode_reg = mode_reg | 0x80000000 | EMAC_MR1_IST; + + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); + + /* Enable broadcast and indvidual address */ + /* TBS: enabling runts as some misbehaved nics will send runts */ + out_be32((void *)EMAC0_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); + + /* we probably need to set the tx mode1 reg? maybe at tx time */ + + /* set transmit request threshold register */ + out_be32((void *)EMAC0_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ + + /* set receive low/high water mark register */ +#if defined(CONFIG_440) + /* 440s has a 64 byte burst length */ + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); +#else + /* 405s have a 16 byte burst length */ + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); +#endif /* defined(CONFIG_440) */ + out_be32((void *)EMAC0_TMR1 + hw_p->hw_addr, 0xf8640000); + + /* Set fifo limit entry in tx mode 0 */ + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, 0x00000003); + /* Frame gap set */ + out_be32((void *)EMAC0_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); + + /* Set EMAC IER */ + hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; + if (speed == _100BASET) + hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; + + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ + out_be32((void *)EMAC0_IER + hw_p->hw_addr, hw_p->emac_ier); + + if (hw_p->first_init == 0) { + /* + * Connect interrupt service routines + */ + irq_install_handler(ETH_IRQ_NUM(hw_p->devnum), + (interrupt_handler_t *) enetInt, dev); + } + + mtmsr (msr); /* enable interrupts again */ + + hw_p->bis = bis; + hw_p->first_init = 1; + + return 0; +} + + +static int ppc_4xx_eth_send(struct eth_device *dev, void *ptr, int len) +{ + struct enet_frame *ef_ptr; + ulong time_start, time_now; + unsigned long temp_txm0; + EMAC_4XX_HW_PST hw_p = dev->priv; + + ef_ptr = (struct enet_frame *) ptr; + + /*-----------------------------------------------------------------------+ + * Copy in our address into the frame. + *-----------------------------------------------------------------------*/ + (void) memcpy (ef_ptr->source_addr, dev->enetaddr, ENET_ADDR_LENGTH); + + /*-----------------------------------------------------------------------+ + * If frame is too long or too short, modify length. + *-----------------------------------------------------------------------*/ + /* TBS: where does the fragment go???? */ + if (len > ENET_MAX_MTU) + len = ENET_MAX_MTU; + + /* memcpy ((void *) &tx_buff[tx_slot], (const void *) ptr, len); */ + memcpy ((void *) hw_p->txbuf_ptr, (const void *) ptr, len); + flush_dcache_range((u32)hw_p->txbuf_ptr, (u32)hw_p->txbuf_ptr + len); + + /*-----------------------------------------------------------------------+ + * set TX Buffer busy, and send it + *-----------------------------------------------------------------------*/ + hw_p->tx[hw_p->tx_slot].ctrl = (MAL_TX_CTRL_LAST | + EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP) & + ~(EMAC_TX_CTRL_ISA | EMAC_TX_CTRL_RSA); + if ((NUM_TX_BUFF - 1) == hw_p->tx_slot) + hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_WRAP; + + hw_p->tx[hw_p->tx_slot].data_len = (short) len; + hw_p->tx[hw_p->tx_slot].ctrl |= MAL_TX_CTRL_READY; + + sync(); + + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, + in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr) | EMAC_TMR0_GNP0); +#ifdef INFO_4XX_ENET + hw_p->stats.pkts_tx++; +#endif + + /*-----------------------------------------------------------------------+ + * poll unitl the packet is sent and then make sure it is OK + *-----------------------------------------------------------------------*/ + time_start = get_timer (0); + while (1) { + temp_txm0 = in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr); + /* loop until either TINT turns on or 3 seconds elapse */ + if ((temp_txm0 & EMAC_TMR0_GNP0) != 0) { + /* transmit is done, so now check for errors + * If there is an error, an interrupt should + * happen when we return + */ + time_now = get_timer (0); + if ((time_now - time_start) > 3000) { + return (-1); + } + } else { + return (len); + } + } +} + +int enetInt (struct eth_device *dev) +{ + int serviced; + int rc = -1; /* default to not us */ + u32 mal_isr; + u32 emac_isr = 0; + u32 mal_eob; + u32 uic_mal; + u32 uic_mal_err; + u32 uic_emac; + u32 uic_emac_b; + EMAC_4XX_HW_PST hw_p; + + /* + * Because the mal is generic, we need to get the current + * eth device + */ + dev = eth_get_dev(); + + hw_p = dev->priv; + + /* enter loop that stays in interrupt code until nothing to service */ + do { + serviced = 0; + + uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR); + uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR); + uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR); + uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR); + + if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB)) + && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) + && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) { + /* not for us */ + return (rc); + } + + /* get and clear controller status interrupts */ + /* look at MAL and EMAC error interrupts */ + if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) { + /* we have a MAL error interrupt */ + mal_isr = mfdcr(MAL0_ESR); + mal_err(dev, mal_isr, uic_mal_err, + MAL_UIC_DEF, MAL_UIC_ERR); + + /* clear MAL error interrupt status bits */ + mtdcr(UIC_BASE_MAL_ERR + UIC_SR, + UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE); + + return -1; + } + + /* look for EMAC errors */ + if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) { + emac_isr = in_be32((void *)EMAC0_ISR + hw_p->hw_addr); + emac_err(dev, emac_isr); + + /* clear EMAC error interrupt status bits */ + mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx); + mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB); + + return -1; + } + + /* handle MAX TX EOB interrupt from a tx */ + if (uic_mal & UIC_MAL_TXEOB) { + /* clear MAL interrupt status bits */ + mal_eob = mfdcr(MAL0_TXEOBISR); + mtdcr(MAL0_TXEOBISR, mal_eob); + mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB); + + /* indicate that we serviced an interrupt */ + serviced = 1; + rc = 0; + } + + /* handle MAL RX EOB interrupt from a receive */ + /* check for EOB on valid channels */ + if (uic_mal & UIC_MAL_RXEOB) { + mal_eob = mfdcr(MAL0_RXEOBISR); + if (mal_eob & + (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) { + /* push packet to upper layer */ + enet_rcv(dev, emac_isr); + + /* clear MAL interrupt status bits */ + mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB); + + /* indicate that we serviced an interrupt */ + serviced = 1; + rc = 0; + } + } +#if defined(CONFIG_405EZ) + /* + * On 405EZ the RX-/TX-interrupts are coalesced into + * one IRQ bit in the UIC. We need to acknowledge the + * RX-/TX-interrupts in the SDR0_ICINTSTAT reg as well. + */ + mtsdr(SDR0_ICINTSTAT, + SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); +#endif /* defined(CONFIG_405EZ) */ + } while (serviced); + + return (rc); +} + +/*-----------------------------------------------------------------------------+ + * MAL Error Routine + *-----------------------------------------------------------------------------*/ +static void mal_err (struct eth_device *dev, unsigned long isr, + unsigned long uic, unsigned long maldef, + unsigned long mal_errr) +{ + EMAC_4XX_HW_PST hw_p = dev->priv; + + mtdcr (MAL0_ESR, isr); /* clear interrupt */ + + /* clear DE interrupt */ + mtdcr (MAL0_TXDEIR, 0xC0000000); + mtdcr (MAL0_RXDEIR, 0x80000000); + +#ifdef INFO_4XX_ENET + printf ("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx \n", isr, uic, maldef, mal_errr); +#endif + + eth_init (hw_p->bis); /* start again... */ +} + +/*-----------------------------------------------------------------------------+ + * EMAC Error Routine + *-----------------------------------------------------------------------------*/ +static void emac_err (struct eth_device *dev, unsigned long isr) +{ + EMAC_4XX_HW_PST hw_p = dev->priv; + + printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr); +} + +/*-----------------------------------------------------------------------------+ + * enet_rcv() handles the ethernet receive data + *-----------------------------------------------------------------------------*/ +static void enet_rcv (struct eth_device *dev, unsigned long malisr) +{ + unsigned long data_len; + unsigned long rx_eob_isr; + EMAC_4XX_HW_PST hw_p = dev->priv; + + int handled = 0; + int i; + int loop_count = 0; + + rx_eob_isr = mfdcr (MAL0_RXEOBISR); + if ((0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL)) & rx_eob_isr) { + /* clear EOB */ + mtdcr (MAL0_RXEOBISR, rx_eob_isr); + + /* EMAC RX done */ + while (1) { /* do all */ + i = hw_p->rx_slot; + + if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl) + || (loop_count >= NUM_RX_BUFF)) + break; + + loop_count++; + handled++; + data_len = (unsigned long) hw_p->rx[i].data_len & 0x0fff; /* Get len */ + if (data_len) { + if (data_len > ENET_MAX_MTU) /* Check len */ + data_len = 0; + else { + if (EMAC_RX_ERRORS & hw_p->rx[i].ctrl) { /* Check Errors */ + data_len = 0; + hw_p->stats.rx_err_log[hw_p-> + rx_err_index] + = hw_p->rx[i].ctrl; + hw_p->rx_err_index++; + if (hw_p->rx_err_index == + MAX_ERR_LOG) + hw_p->rx_err_index = + 0; + } /* emac_erros */ + } /* data_len < max mtu */ + } /* if data_len */ + if (!data_len) { /* no data */ + hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY; /* Free Recv Buffer */ + + hw_p->stats.data_len_err++; /* Error at Rx */ + } + + /* !data_len */ + /* AS.HARNOIS */ + /* Check if user has already eaten buffer */ + /* if not => ERROR */ + else if (hw_p->rx_ready[hw_p->rx_i_index] != -1) { + if (hw_p->is_receiving) + printf ("ERROR : Receive buffers are full!\n"); + break; + } else { + hw_p->stats.rx_frames++; + hw_p->stats.rx += data_len; +#ifdef INFO_4XX_ENET + hw_p->stats.pkts_rx++; +#endif + /* AS.HARNOIS + * use ring buffer + */ + hw_p->rx_ready[hw_p->rx_i_index] = i; + hw_p->rx_i_index++; + if (NUM_RX_BUFF == hw_p->rx_i_index) + hw_p->rx_i_index = 0; + + hw_p->rx_slot++; + if (NUM_RX_BUFF == hw_p->rx_slot) + hw_p->rx_slot = 0; + + /* AS.HARNOIS + * free receive buffer only when + * buffer has been handled (eth_rx) + rx[i].ctrl |= MAL_RX_CTRL_EMPTY; + */ + } /* if data_len */ + } /* while */ + } /* if EMACK_RXCHL */ +} + + +static int ppc_4xx_eth_rx (struct eth_device *dev) +{ + int length; + int user_index; + unsigned long msr; + EMAC_4XX_HW_PST hw_p = dev->priv; + + hw_p->is_receiving = 1; /* tell driver */ + + for (;;) { + /* AS.HARNOIS + * use ring buffer and + * get index from rx buffer desciptor queue + */ + user_index = hw_p->rx_ready[hw_p->rx_u_index]; + if (user_index == -1) { + length = -1; + break; /* nothing received - leave for() loop */ + } + + msr = mfmsr (); + mtmsr (msr & ~(MSR_EE)); + + length = hw_p->rx[user_index].data_len & 0x0fff; + + /* Pass the packet up to the protocol layers. */ + /* NetReceive(NetRxPackets[rxIdx], length - 4); */ + /* NetReceive(NetRxPackets[i], length); */ + invalidate_dcache_range((u32)hw_p->rx[user_index].data_ptr, + (u32)hw_p->rx[user_index].data_ptr + + length - 4); + NetReceive (NetRxPackets[user_index], length - 4); + /* Free Recv Buffer */ + hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY; + /* Free rx buffer descriptor queue */ + hw_p->rx_ready[hw_p->rx_u_index] = -1; + hw_p->rx_u_index++; + if (NUM_RX_BUFF == hw_p->rx_u_index) + hw_p->rx_u_index = 0; + +#ifdef INFO_4XX_ENET + hw_p->stats.pkts_handled++; +#endif + + mtmsr (msr); /* Enable IRQ's */ + } + + hw_p->is_receiving = 0; /* tell driver */ + + return length; +} + +int ppc_4xx_eth_initialize (bd_t * bis) +{ + static int virgin = 0; + struct eth_device *dev; + int eth_num = 0; + EMAC_4XX_HW_PST hw = NULL; + u8 ethaddr[4 + CONFIG_EMAC_NR_START][6]; + u32 hw_addr[4]; + u32 mal_ier; + +#if defined(CONFIG_440GX) + unsigned long pfc1; + + mfsdr (SDR0_PFC1, pfc1); + pfc1 &= ~(0x01e00000); + pfc1 |= 0x01200000; + mtsdr (SDR0_PFC1, pfc1); +#endif + + /* first clear all mac-addresses */ + for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) + memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6); + + for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { + int ethaddr_idx = eth_num + CONFIG_EMAC_NR_START; + switch (eth_num) { + default: /* fall through */ + case 0: + eth_getenv_enetaddr("ethaddr", ethaddr[ethaddr_idx]); + hw_addr[eth_num] = 0x0; + break; +#ifdef CONFIG_HAS_ETH1 + case 1: + eth_getenv_enetaddr("eth1addr", ethaddr[ethaddr_idx]); + hw_addr[eth_num] = 0x100; + break; +#endif +#ifdef CONFIG_HAS_ETH2 + case 2: + eth_getenv_enetaddr("eth2addr", ethaddr[ethaddr_idx]); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x300; +#else + hw_addr[eth_num] = 0x400; +#endif + break; +#endif +#ifdef CONFIG_HAS_ETH3 + case 3: + eth_getenv_enetaddr("eth3addr", ethaddr[ethaddr_idx]); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x400; +#else + hw_addr[eth_num] = 0x600; +#endif + break; +#endif + } + } + + /* set phy num and mode */ + bis->bi_phynum[0] = CONFIG_PHY_ADDR; + bis->bi_phymode[0] = 0; + +#if defined(CONFIG_PHY1_ADDR) + bis->bi_phynum[1] = CONFIG_PHY1_ADDR; + bis->bi_phymode[1] = 0; +#endif +#if defined(CONFIG_440GX) + bis->bi_phynum[2] = CONFIG_PHY2_ADDR; + bis->bi_phynum[3] = CONFIG_PHY3_ADDR; + bis->bi_phymode[2] = 2; + bis->bi_phymode[3] = 2; +#endif + +#if defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_405EX) + ppc_4xx_eth_setup_bridge(0, bis); +#endif + + for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { + /* + * See if we can actually bring up the interface, + * otherwise, skip it + */ + if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) { + bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; + continue; + } + + /* Allocate device structure */ + dev = (struct eth_device *) malloc (sizeof (*dev)); + if (dev == NULL) { + printf ("ppc_4xx_eth_initialize: " + "Cannot allocate eth_device %d\n", eth_num); + return (-1); + } + memset(dev, 0, sizeof(*dev)); + + /* Allocate our private use data */ + hw = (EMAC_4XX_HW_PST) malloc (sizeof (*hw)); + if (hw == NULL) { + printf ("ppc_4xx_eth_initialize: " + "Cannot allocate private hw data for eth_device %d", + eth_num); + free (dev); + return (-1); + } + memset(hw, 0, sizeof(*hw)); + + hw->hw_addr = hw_addr[eth_num]; + memcpy (dev->enetaddr, ethaddr[eth_num], 6); + hw->devnum = eth_num; + hw->print_speed = 1; + + sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START); + dev->priv = (void *) hw; + dev->init = ppc_4xx_eth_init; + dev->halt = ppc_4xx_eth_halt; + dev->send = ppc_4xx_eth_send; + dev->recv = ppc_4xx_eth_rx; + + eth_register(dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + miiphy_register(dev->name, + emac4xx_miiphy_read, emac4xx_miiphy_write); +#endif + + if (0 == virgin) { + /* set the MAL IER ??? names may change with new spec ??? */ +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + mal_ier = + MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE | + MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ; +#else + mal_ier = + MAL_IER_DE | MAL_IER_NE | MAL_IER_TE | + MAL_IER_OPBE | MAL_IER_PLBE; +#endif + mtdcr (MAL0_ESR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_TXDEIR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_RXDEIR, 0xffffffff); /* clear pending interrupts */ + mtdcr (MAL0_IER, mal_ier); + + /* install MAL interrupt handler */ + irq_install_handler (VECNUM_MAL_SERR, + (interrupt_handler_t *) enetInt, + dev); + irq_install_handler (VECNUM_MAL_TXEOB, + (interrupt_handler_t *) enetInt, + dev); + irq_install_handler (VECNUM_MAL_RXEOB, + (interrupt_handler_t *) enetInt, + dev); + irq_install_handler (VECNUM_MAL_TXDE, + (interrupt_handler_t *) enetInt, + dev); + irq_install_handler (VECNUM_MAL_RXDE, + (interrupt_handler_t *) enetInt, + dev); + virgin = 1; + } + } /* end for each supported device */ + + return 0; +} |