diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/mtd/spi')
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/Makefile | 17 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/eeprom_m95xxx.c | 111 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/fsl_espi_spl.c | 90 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/ramtron.c | 403 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sandbox.c | 483 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sf.c | 58 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sf_internal.h | 159 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sf_ops.c | 518 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sf_params.c | 131 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/sf_probe.c | 391 | ||||
| -rw-r--r-- | qemu/roms/u-boot/drivers/mtd/spi/spi_spl_load.c | 80 |
11 files changed, 2441 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/mtd/spi/Makefile b/qemu/roms/u-boot/drivers/mtd/spi/Makefile new file mode 100644 index 000000000..9e18fb41d --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/Makefile @@ -0,0 +1,17 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o +obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o +endif + +obj-$(CONFIG_CMD_SF) += sf.o +obj-$(CONFIG_SPI_FLASH) += sf_params.o sf_probe.o sf_ops.o +obj-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o +obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o +obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o diff --git a/qemu/roms/u-boot/drivers/mtd/spi/eeprom_m95xxx.c b/qemu/roms/u-boot/drivers/mtd/spi/eeprom_m95xxx.c new file mode 100644 index 000000000..a019939b8 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/eeprom_m95xxx.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi.h> + +#define SPI_EEPROM_WREN 0x06 +#define SPI_EEPROM_RDSR 0x05 +#define SPI_EEPROM_READ 0x03 +#define SPI_EEPROM_WRITE 0x02 + +#ifndef CONFIG_DEFAULT_SPI_BUS +#define CONFIG_DEFAULT_SPI_BUS 0 +#endif + +#ifndef CONFIG_DEFAULT_SPI_MODE +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 +#endif + +#ifndef CONFIG_SYS_SPI_WRITE_TOUT +#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) +#endif + +ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) +{ + struct spi_slave *slave; + u8 cmd = SPI_EEPROM_READ; + + slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000, + CONFIG_DEFAULT_SPI_MODE); + if (!slave) + return 0; + + spi_claim_bus(slave); + + /* command */ + if (spi_xfer(slave, 8, &cmd, NULL, SPI_XFER_BEGIN)) + return -1; + + /* + * if alen == 3, addr[0] is the block number, we never use it here. + * All we need are the lower 16 bits. + */ + if (alen == 3) + addr++; + + /* address, and data */ + if (spi_xfer(slave, 16, addr, NULL, 0)) + return -1; + if (spi_xfer(slave, 8 * len, NULL, buffer, SPI_XFER_END)) + return -1; + + spi_release_bus(slave); + spi_free_slave(slave); + return len; +} + +ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) +{ + struct spi_slave *slave; + char buf[3]; + ulong start; + + slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, 1, 1000000, + CONFIG_DEFAULT_SPI_MODE); + if (!slave) + return 0; + + spi_claim_bus(slave); + + buf[0] = SPI_EEPROM_WREN; + if (spi_xfer(slave, 8, buf, NULL, SPI_XFER_BEGIN | SPI_XFER_END)) + return -1; + + buf[0] = SPI_EEPROM_WRITE; + + /* As for reading, drop addr[0] if alen is 3 */ + if (alen == 3) { + alen--; + addr++; + } + + memcpy(buf + 1, addr, alen); + /* command + addr, then data */ + if (spi_xfer(slave, 24, buf, NULL, SPI_XFER_BEGIN)) + return -1; + if (spi_xfer(slave, len * 8, buffer, NULL, SPI_XFER_END)) + return -1; + + start = get_timer(0); + do { + buf[0] = SPI_EEPROM_RDSR; + buf[1] = 0; + spi_xfer(slave, 16, buf, buf, SPI_XFER_BEGIN | SPI_XFER_END); + + if (!(buf[1] & 1)) + break; + + } while (get_timer(start) < CONFIG_SYS_SPI_WRITE_TOUT); + + if (buf[1] & 1) + printf("*** spi_write: Timeout while writing!\n"); + + spi_release_bus(slave); + spi_free_slave(slave); + return len; +} diff --git a/qemu/roms/u-boot/drivers/mtd/spi/fsl_espi_spl.c b/qemu/roms/u-boot/drivers/mtd/spi/fsl_espi_spl.c new file mode 100644 index 000000000..b915469b4 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/fsl_espi_spl.c @@ -0,0 +1,90 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> +#include <malloc.h> + +#define ESPI_BOOT_IMAGE_SIZE 0x48 +#define ESPI_BOOT_IMAGE_ADDR 0x50 +#define CONFIG_CFG_DATA_SECTOR 0 + +void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst) +{ + struct spi_flash *flash; + + flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (flash == NULL) { + puts("\nspi_flash_probe failed"); + hang(); + } + + spi_flash_read(flash, offs, size, vdst); +} + +/* + * The main entry for SPI booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from SPI into SDRAM and starts it from there. + */ +void spi_boot(void) +{ + void (*uboot)(void) __noreturn; + u32 offset, code_len, copy_len = 0; +#ifndef CONFIG_FSL_CORENET + unsigned char *buf = NULL; +#endif + struct spi_flash *flash; + + flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (flash == NULL) { + puts("\nspi_flash_probe failed"); + hang(); + } + +#ifdef CONFIG_FSL_CORENET + offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE; +#else + /* + * Load U-Boot image from SPI flash into RAM + */ + buf = malloc(flash->page_size); + if (buf == NULL) { + puts("\nmalloc failed"); + hang(); + } + memset(buf, 0, flash->page_size); + + spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR, + flash->page_size, (void *)buf); + offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR); + /* Skip spl code */ + offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE); + /* Skip spl code */ + code_len = code_len - CONFIG_SPL_MAX_SIZE; +#endif + /* copy code to DDR */ + printf("Loading second stage boot loader "); + while (copy_len <= code_len) { + spi_flash_read(flash, offset + copy_len, 0x2000, + (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST + + copy_len)); + copy_len = copy_len + 0x2000; + putc('.'); + } + + /* + * Jump to U-Boot image + */ + flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len); + uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START; + (*uboot)(); +} diff --git a/qemu/roms/u-boot/drivers/mtd/spi/ramtron.c b/qemu/roms/u-boot/drivers/mtd/spi/ramtron.c new file mode 100644 index 000000000..d50da37c8 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/ramtron.c @@ -0,0 +1,403 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * Note: RAMTRON SPI FRAMs are ferroelectric, nonvolatile RAMs + * with an interface identical to SPI flash devices. + * However since they behave like RAM there are no delays or + * busy polls required. They can sustain read or write at the + * allowed SPI bus speed, which can be 40 MHz for some devices. + * + * Unfortunately some RAMTRON devices do not have a means of + * identifying them. They will leave the SO line undriven when + * the READ-ID command is issued. It is therefore mandatory + * that the MISO line has a proper pull-up, so that READ-ID + * will return a row of 0xff. This 0xff pseudo-id will cause + * probes by all vendor specific functions that are designed + * to handle it. If the MISO line is not pulled up, READ-ID + * could return any random noise, even mimicking another + * device. + * + * We use CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC + * to define which device will be assumed after a simple status + * register verify. This method is prone to false positive + * detection and should therefore be the last to be tried. + * Enter it in the last position in the table in spi_flash.c! + * + * The define CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC both activates + * compilation of the special handler and defines the device + * to assume. + */ + +#include <common.h> +#include <malloc.h> +#include <spi_flash.h> +#include "sf_internal.h" + +/* + * Properties of supported FRAMs + * Note: speed is currently not used because we have no method to deliver that + * value to the upper layers + */ +struct ramtron_spi_fram_params { + u32 size; /* size in bytes */ + u8 addr_len; /* number of address bytes */ + u8 merge_cmd; /* some address bits are in the command byte */ + u8 id1; /* device ID 1 (family, density) */ + u8 id2; /* device ID 2 (sub, rev, rsvd) */ + u32 speed; /* max. SPI clock in Hz */ + const char *name; /* name for display and/or matching */ +}; + +struct ramtron_spi_fram { + struct spi_flash flash; + const struct ramtron_spi_fram_params *params; +}; + +static inline struct ramtron_spi_fram *to_ramtron_spi_fram(struct spi_flash + *flash) +{ + return container_of(flash, struct ramtron_spi_fram, flash); +} + +/* + * table describing supported FRAM chips: + * chips without RDID command must have the values 0xff for id1 and id2 + */ +static const struct ramtron_spi_fram_params ramtron_spi_fram_table[] = { + { + .size = 32*1024, + .addr_len = 2, + .merge_cmd = 0, + .id1 = 0x22, + .id2 = 0x00, + .speed = 40000000, + .name = "FM25V02", + }, + { + .size = 32*1024, + .addr_len = 2, + .merge_cmd = 0, + .id1 = 0x22, + .id2 = 0x01, + .speed = 40000000, + .name = "FM25VN02", + }, + { + .size = 64*1024, + .addr_len = 2, + .merge_cmd = 0, + .id1 = 0x23, + .id2 = 0x00, + .speed = 40000000, + .name = "FM25V05", + }, + { + .size = 64*1024, + .addr_len = 2, + .merge_cmd = 0, + .id1 = 0x23, + .id2 = 0x01, + .speed = 40000000, + .name = "FM25VN05", + }, + { + .size = 128*1024, + .addr_len = 3, + .merge_cmd = 0, + .id1 = 0x24, + .id2 = 0x00, + .speed = 40000000, + .name = "FM25V10", + }, + { + .size = 128*1024, + .addr_len = 3, + .merge_cmd = 0, + .id1 = 0x24, + .id2 = 0x01, + .speed = 40000000, + .name = "FM25VN10", + }, +#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC + { + .size = 256*1024, + .addr_len = 3, + .merge_cmd = 0, + .id1 = 0xff, + .id2 = 0xff, + .speed = 40000000, + .name = "FM25H20", + }, +#endif +}; + +static int ramtron_common(struct spi_flash *flash, + u32 offset, size_t len, void *buf, u8 command) +{ + struct ramtron_spi_fram *sn = to_ramtron_spi_fram(flash); + u8 cmd[4]; + int cmd_len; + int ret; + + if (sn->params->addr_len == 3 && sn->params->merge_cmd == 0) { + cmd[0] = command; + cmd[1] = offset >> 16; + cmd[2] = offset >> 8; + cmd[3] = offset; + cmd_len = 4; + } else if (sn->params->addr_len == 2 && sn->params->merge_cmd == 0) { + cmd[0] = command; + cmd[1] = offset >> 8; + cmd[2] = offset; + cmd_len = 3; + } else { + printf("SF: unsupported addr_len or merge_cmd\n"); + return -1; + } + + /* claim the bus */ + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + if (command == CMD_PAGE_PROGRAM) { + /* send WREN */ + ret = spi_flash_cmd_write_enable(flash); + if (ret < 0) { + debug("SF: Enabling Write failed\n"); + goto releasebus; + } + } + + /* do the transaction */ + if (command == CMD_PAGE_PROGRAM) + ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, buf, len); + else + ret = spi_flash_cmd_read(flash->spi, cmd, cmd_len, buf, len); + if (ret < 0) + debug("SF: Transaction failed\n"); + +releasebus: + /* release the bus */ + spi_release_bus(flash->spi); + return ret; +} + +static int ramtron_read(struct spi_flash *flash, + u32 offset, size_t len, void *buf) +{ + return ramtron_common(flash, offset, len, buf, + CMD_READ_ARRAY_SLOW); +} + +static int ramtron_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + return ramtron_common(flash, offset, len, (void *)buf, + CMD_PAGE_PROGRAM); +} + +static int ramtron_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + debug("SF: Erase of RAMTRON FRAMs is pointless\n"); + return -1; +} + +/* + * nore: we are called here with idcode pointing to the first non-0x7f byte + * already! + */ +static struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, + u8 *idcode) +{ + const struct ramtron_spi_fram_params *params; + struct ramtron_spi_fram *sn; + unsigned int i; +#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC + int ret; + u8 sr; +#endif + + /* NOTE: the bus has been claimed before this function is called! */ + switch (idcode[0]) { + case 0xc2: + /* JEDEC conformant RAMTRON id */ + for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { + params = &ramtron_spi_fram_table[i]; + if (idcode[1] == params->id1 && + idcode[2] == params->id2) + goto found; + } + break; +#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC + case 0xff: + /* + * probably open MISO line, pulled up. + * We COULD have a non JEDEC conformant FRAM here, + * read the status register to verify + */ + ret = spi_flash_cmd(spi, CMD_READ_STATUS, &sr, 1); + if (ret) + return NULL; + + /* Bits 5,4,0 are fixed 0 for all devices */ + if ((sr & 0x31) != 0x00) + return NULL; + /* now find the device */ + for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { + params = &ramtron_spi_fram_table[i]; + if (!strcmp(params->name, + CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC)) + goto found; + } + debug("SF: Unsupported non-JEDEC RAMTRON device " + CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC "\n"); + break; +#endif + default: + break; + } + + /* arriving here means no method has found a device we can handle */ + debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n", + idcode[0], idcode[1], idcode[2]); + return NULL; + +found: + sn = malloc(sizeof(*sn)); + if (!sn) { + debug("SF: Failed to allocate memory\n"); + return NULL; + } + + sn->params = params; + + sn->flash.write = ramtron_write; + sn->flash.read = ramtron_read; + sn->flash.erase = ramtron_erase; + sn->flash.size = params->size; + + return &sn->flash; +} + +/* + * The following table holds all device probe functions + * (All flashes are removed and implemented a common probe at + * spi_flash_probe.c) + * + * shift: number of continuation bytes before the ID + * idcode: the expected IDCODE or 0xff for non JEDEC devices + * probe: the function to call + * + * Non JEDEC devices should be ordered in the table such that + * the probe functions with best detection algorithms come first. + * + * Several matching entries are permitted, they will be tried + * in sequence until a probe function returns non NULL. + * + * IDCODE_CONT_LEN may be redefined if a device needs to declare a + * larger "shift" value. IDCODE_PART_LEN generally shouldn't be + * changed. This is the max number of bytes probe functions may + * examine when looking up part-specific identification info. + * + * Probe functions will be given the idcode buffer starting at their + * manu id byte (the "idcode" in the table below). In other words, + * all of the continuation bytes will be skipped (the "shift" below). + */ +#define IDCODE_CONT_LEN 0 +#define IDCODE_PART_LEN 5 +static const struct { + const u8 shift; + const u8 idcode; + struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode); +} flashes[] = { + /* Keep it sorted by define name */ +#ifdef CONFIG_SPI_FRAM_RAMTRON + { 6, 0xc2, spi_fram_probe_ramtron, }, +# undef IDCODE_CONT_LEN +# define IDCODE_CONT_LEN 6 +#endif +#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC + { 0, 0xff, spi_fram_probe_ramtron, }, +#endif +}; +#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN) + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + struct spi_flash *flash = NULL; + int ret, i, shift; + u8 idcode[IDCODE_LEN], *idp; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + printf("SF: Failed to set up slave\n"); + return NULL; + } + + ret = spi_claim_bus(spi); + if (ret) { + debug("SF: Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + /* Read the ID codes */ + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) + goto err_read_id; + +#ifdef DEBUG + printf("SF: Got idcodes\n"); + print_buffer(0, idcode, 1, sizeof(idcode), 0); +#endif + + /* count the number of continuation bytes */ + for (shift = 0, idp = idcode; + shift < IDCODE_CONT_LEN && *idp == 0x7f; + ++shift, ++idp) + continue; + + /* search the table for matches in shift and id */ + for (i = 0; i < ARRAY_SIZE(flashes); ++i) + if (flashes[i].shift == shift && flashes[i].idcode == *idp) { + /* we have a match, call probe */ + flash = flashes[i].probe(spi, idp); + if (flash) + break; + } + + if (!flash) { + printf("SF: Unsupported manufacturer %02x\n", *idp); + goto err_manufacturer_probe; + } + + printf("SF: Detected %s with total size ", flash->name); + print_size(flash->size, ""); + puts("\n"); + + spi_release_bus(spi); + + return flash; + +err_manufacturer_probe: +err_read_id: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +void spi_flash_free(struct spi_flash *flash) +{ + spi_free_slave(flash->spi); + free(flash); +} diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sandbox.c b/qemu/roms/u-boot/drivers/mtd/spi/sandbox.c new file mode 100644 index 000000000..a62ef4cbb --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sandbox.c @@ -0,0 +1,483 @@ +/* + * Simulate a SPI flash + * + * Copyright (c) 2011-2013 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <os.h> + +#include <spi_flash.h> +#include "sf_internal.h" + +#include <asm/getopt.h> +#include <asm/spi.h> +#include <asm/state.h> + +/* + * The different states that our SPI flash transitions between. + * We need to keep track of this across multiple xfer calls since + * the SPI bus could possibly call down into us multiple times. + */ +enum sandbox_sf_state { + SF_CMD, /* default state -- we're awaiting a command */ + SF_ID, /* read the flash's (jedec) ID code */ + SF_ADDR, /* processing the offset in the flash to read/etc... */ + SF_READ, /* reading data from the flash */ + SF_WRITE, /* writing data to the flash, i.e. page programming */ + SF_ERASE, /* erase the flash */ + SF_READ_STATUS, /* read the flash's status register */ + SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/ +}; + +static const char *sandbox_sf_state_name(enum sandbox_sf_state state) +{ + static const char * const states[] = { + "CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS", + }; + return states[state]; +} + +/* Bits for the status register */ +#define STAT_WIP (1 << 0) +#define STAT_WEL (1 << 1) + +/* Assume all SPI flashes have 3 byte addresses since they do atm */ +#define SF_ADDR_LEN 3 + +struct sandbox_spi_flash_erase_commands { + u8 cmd; + u32 size; +}; +#define IDCODE_LEN 5 +#define MAX_ERASE_CMDS 3 +struct sandbox_spi_flash_data { + const char *name; + u8 idcode[IDCODE_LEN]; + u32 size; + const struct sandbox_spi_flash_erase_commands + erase_cmds[MAX_ERASE_CMDS]; +}; + +/* Structure describing all the flashes we know how to emulate */ +static const struct sandbox_spi_flash_data sandbox_sf_flashes[] = { + { + "M25P16", { 0x20, 0x20, 0x15 }, (2 << 20), + { /* erase commands */ + { 0xd8, (64 << 10), }, /* sector */ + { 0xc7, (2 << 20), }, /* bulk */ + }, + }, + { + "W25Q32", { 0xef, 0x40, 0x16 }, (4 << 20), + { /* erase commands */ + { 0x20, (4 << 10), }, /* 4KB */ + { 0xd8, (64 << 10), }, /* sector */ + { 0xc7, (4 << 20), }, /* bulk */ + }, + }, + { + "W25Q128", { 0xef, 0x40, 0x18 }, (16 << 20), + { /* erase commands */ + { 0x20, (4 << 10), }, /* 4KB */ + { 0xd8, (64 << 10), }, /* sector */ + { 0xc7, (16 << 20), }, /* bulk */ + }, + }, +}; + +/* Used to quickly bulk erase backing store */ +static u8 sandbox_sf_0xff[0x1000]; + +/* Internal state data for each SPI flash */ +struct sandbox_spi_flash { + /* + * As we receive data over the SPI bus, our flash transitions + * between states. For example, we start off in the SF_CMD + * state where the first byte tells us what operation to perform + * (such as read or write the flash). But the operation itself + * can go through a few states such as first reading in the + * offset in the flash to perform the requested operation. + * Thus "state" stores the exact state that our machine is in + * while "cmd" stores the overall command we're processing. + */ + enum sandbox_sf_state state; + uint cmd; + const void *cmd_data; + /* Current position in the flash; used when reading/writing/etc... */ + uint off; + /* How many address bytes we've consumed */ + uint addr_bytes, pad_addr_bytes; + /* The current flash status (see STAT_XXX defines above) */ + u16 status; + /* Data describing the flash we're emulating */ + const struct sandbox_spi_flash_data *data; + /* The file on disk to serv up data from */ + int fd; +}; + +static int sandbox_sf_setup(void **priv, const char *spec) +{ + /* spec = idcode:file */ + struct sandbox_spi_flash *sbsf; + const char *file; + size_t i, len, idname_len; + const struct sandbox_spi_flash_data *data; + + file = strchr(spec, ':'); + if (!file) { + printf("sandbox_sf: unable to parse file\n"); + goto error; + } + idname_len = file - spec; + ++file; + + for (i = 0; i < ARRAY_SIZE(sandbox_sf_flashes); ++i) { + data = &sandbox_sf_flashes[i]; + len = strlen(data->name); + if (idname_len != len) + continue; + if (!memcmp(spec, data->name, len)) + break; + } + if (i == ARRAY_SIZE(sandbox_sf_flashes)) { + printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len, + spec); + goto error; + } + + if (sandbox_sf_0xff[0] == 0x00) + memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff)); + + sbsf = calloc(sizeof(*sbsf), 1); + if (!sbsf) { + printf("sandbox_sf: out of memory\n"); + goto error; + } + + sbsf->fd = os_open(file, 02); + if (sbsf->fd == -1) { + free(sbsf); + printf("sandbox_sf: unable to open file '%s'\n", file); + goto error; + } + + sbsf->data = data; + + *priv = sbsf; + return 0; + + error: + return 1; +} + +static void sandbox_sf_free(void *priv) +{ + struct sandbox_spi_flash *sbsf = priv; + + os_close(sbsf->fd); + free(sbsf); +} + +static void sandbox_sf_cs_activate(void *priv) +{ + struct sandbox_spi_flash *sbsf = priv; + + debug("sandbox_sf: CS activated; state is fresh!\n"); + + /* CS is asserted, so reset state */ + sbsf->off = 0; + sbsf->addr_bytes = 0; + sbsf->pad_addr_bytes = 0; + sbsf->state = SF_CMD; + sbsf->cmd = SF_CMD; +} + +static void sandbox_sf_cs_deactivate(void *priv) +{ + debug("sandbox_sf: CS deactivated; cmd done processing!\n"); +} + +/* Figure out what command this stream is telling us to do */ +static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx, + u8 *tx) +{ + enum sandbox_sf_state oldstate = sbsf->state; + + /* We need to output a byte for the cmd byte we just ate */ + sandbox_spi_tristate(tx, 1); + + sbsf->cmd = rx[0]; + switch (sbsf->cmd) { + case CMD_READ_ID: + sbsf->state = SF_ID; + sbsf->cmd = SF_ID; + break; + case CMD_READ_ARRAY_FAST: + sbsf->pad_addr_bytes = 1; + case CMD_READ_ARRAY_SLOW: + case CMD_PAGE_PROGRAM: + state_addr: + sbsf->state = SF_ADDR; + break; + case CMD_WRITE_DISABLE: + debug(" write disabled\n"); + sbsf->status &= ~STAT_WEL; + break; + case CMD_READ_STATUS: + sbsf->state = SF_READ_STATUS; + break; + case CMD_READ_STATUS1: + sbsf->state = SF_READ_STATUS1; + break; + case CMD_WRITE_ENABLE: + debug(" write enabled\n"); + sbsf->status |= STAT_WEL; + break; + default: { + size_t i; + + /* handle erase commands first */ + for (i = 0; i < MAX_ERASE_CMDS; ++i) { + const struct sandbox_spi_flash_erase_commands * + erase_cmd = &sbsf->data->erase_cmds[i]; + + if (erase_cmd->cmd == 0x00) + continue; + if (sbsf->cmd != erase_cmd->cmd) + continue; + + sbsf->cmd_data = erase_cmd; + goto state_addr; + } + + debug(" cmd unknown: %#x\n", sbsf->cmd); + return 1; + } + } + + if (oldstate != sbsf->state) + debug(" cmd: transition to %s state\n", + sandbox_sf_state_name(sbsf->state)); + + return 0; +} + +int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size) +{ + int todo; + int ret; + + while (size > 0) { + todo = min(size, sizeof(sandbox_sf_0xff)); + ret = os_write(sbsf->fd, sandbox_sf_0xff, todo); + if (ret != todo) + return ret; + size -= todo; + } + + return 0; +} + +static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx, + uint bytes) +{ + struct sandbox_spi_flash *sbsf = priv; + uint cnt, pos = 0; + int ret; + + debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state, + sandbox_sf_state_name(sbsf->state), bytes); + + if (sbsf->state == SF_CMD) { + /* Figure out the initial state */ + if (sandbox_sf_process_cmd(sbsf, rx, tx)) + return 1; + ++pos; + } + + /* Process the remaining data */ + while (pos < bytes) { + switch (sbsf->state) { + case SF_ID: { + u8 id; + + debug(" id: off:%u tx:", sbsf->off); + if (sbsf->off < IDCODE_LEN) + id = sbsf->data->idcode[sbsf->off]; + else + id = 0; + debug("%02x\n", id); + tx[pos++] = id; + ++sbsf->off; + break; + } + case SF_ADDR: + debug(" addr: bytes:%u rx:%02x ", sbsf->addr_bytes, + rx[pos]); + + if (sbsf->addr_bytes++ < SF_ADDR_LEN) + sbsf->off = (sbsf->off << 8) | rx[pos]; + debug("addr:%06x\n", sbsf->off); + + sandbox_spi_tristate(&tx[pos++], 1); + + /* See if we're done processing */ + if (sbsf->addr_bytes < + SF_ADDR_LEN + sbsf->pad_addr_bytes) + break; + + /* Next state! */ + if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) { + puts("sandbox_sf: os_lseek() failed"); + return 1; + } + switch (sbsf->cmd) { + case CMD_READ_ARRAY_FAST: + case CMD_READ_ARRAY_SLOW: + sbsf->state = SF_READ; + break; + case CMD_PAGE_PROGRAM: + sbsf->state = SF_WRITE; + break; + default: + /* assume erase state ... */ + sbsf->state = SF_ERASE; + goto case_sf_erase; + } + debug(" cmd: transition to %s state\n", + sandbox_sf_state_name(sbsf->state)); + break; + case SF_READ: + /* + * XXX: need to handle exotic behavior: + * - reading past end of device + */ + + cnt = bytes - pos; + debug(" tx: read(%u)\n", cnt); + ret = os_read(sbsf->fd, tx + pos, cnt); + if (ret < 0) { + puts("sandbox_spi: os_read() failed\n"); + return 1; + } + pos += ret; + break; + case SF_READ_STATUS: + debug(" read status: %#x\n", sbsf->status); + cnt = bytes - pos; + memset(tx + pos, sbsf->status, cnt); + pos += cnt; + break; + case SF_READ_STATUS1: + debug(" read status: %#x\n", sbsf->status); + cnt = bytes - pos; + memset(tx + pos, sbsf->status >> 8, cnt); + pos += cnt; + break; + case SF_WRITE: + /* + * XXX: need to handle exotic behavior: + * - unaligned addresses + * - more than a page (256) worth of data + * - reading past end of device + */ + if (!(sbsf->status & STAT_WEL)) { + puts("sandbox_sf: write enable not set before write\n"); + goto done; + } + + cnt = bytes - pos; + debug(" rx: write(%u)\n", cnt); + sandbox_spi_tristate(&tx[pos], cnt); + ret = os_write(sbsf->fd, rx + pos, cnt); + if (ret < 0) { + puts("sandbox_spi: os_write() failed\n"); + return 1; + } + pos += ret; + sbsf->status &= ~STAT_WEL; + break; + case SF_ERASE: + case_sf_erase: { + const struct sandbox_spi_flash_erase_commands * + erase_cmd = sbsf->cmd_data; + + if (!(sbsf->status & STAT_WEL)) { + puts("sandbox_sf: write enable not set before erase\n"); + goto done; + } + + /* verify address is aligned */ + if (sbsf->off & (erase_cmd->size - 1)) { + debug(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n", + erase_cmd->cmd, erase_cmd->size, + sbsf->off); + sbsf->status &= ~STAT_WEL; + goto done; + } + + debug(" sector erase addr: %u\n", sbsf->off); + + cnt = bytes - pos; + sandbox_spi_tristate(&tx[pos], cnt); + pos += cnt; + + /* + * TODO(vapier@gentoo.org): latch WIP in status, and + * delay before clearing it ? + */ + ret = sandbox_erase_part(sbsf, erase_cmd->size); + sbsf->status &= ~STAT_WEL; + if (ret) { + debug("sandbox_sf: Erase failed\n"); + goto done; + } + goto done; + } + default: + debug(" ??? no idea what to do ???\n"); + goto done; + } + } + + done: + return pos == bytes ? 0 : 1; +} + +static const struct sandbox_spi_emu_ops sandbox_sf_ops = { + .setup = sandbox_sf_setup, + .free = sandbox_sf_free, + .cs_activate = sandbox_sf_cs_activate, + .cs_deactivate = sandbox_sf_cs_deactivate, + .xfer = sandbox_sf_xfer, +}; + +static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state, + const char *arg) +{ + unsigned long bus, cs; + const char *spec = sandbox_spi_parse_spec(arg, &bus, &cs); + + if (!spec) + return 1; + + /* + * It is safe to not make a copy of 'spec' because it comes from the + * command line. + * + * TODO(sjg@chromium.org): It would be nice if we could parse the + * spec here, but the problem is that no U-Boot init has been done + * yet. Perhaps we can figure something out. + */ + state->spi[bus][cs].ops = &sandbox_sf_ops; + state->spi[bus][cs].spec = spec; + return 0; +} +SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>"); diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sf.c b/qemu/roms/u-boot/drivers/mtd/spi/sf.c new file mode 100644 index 000000000..664e86082 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sf.c @@ -0,0 +1,58 @@ +/* + * SPI flash interface + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi.h> + +static int spi_flash_read_write(struct spi_slave *spi, + const u8 *cmd, size_t cmd_len, + const u8 *data_out, u8 *data_in, + size_t data_len) +{ + unsigned long flags = SPI_XFER_BEGIN; + int ret; + +#ifdef CONFIG_SF_DUAL_FLASH + if (spi->flags & SPI_XFER_U_PAGE) + flags |= SPI_XFER_U_PAGE; +#endif + if (data_len == 0) + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); + if (ret) { + debug("SF: Failed to send command (%zu bytes): %d\n", + cmd_len, ret); + } else if (data_len != 0) { + ret = spi_xfer(spi, data_len * 8, data_out, data_in, + SPI_XFER_END); + if (ret) + debug("SF: Failed to transfer %zu bytes of data: %d\n", + data_len, ret); + } + + return ret; +} + +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + return spi_flash_read_write(spi, cmd, cmd_len, NULL, data, data_len); +} + +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) +{ + return spi_flash_cmd_read(spi, &cmd, 1, response, len); +} + +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len) +{ + return spi_flash_read_write(spi, cmd, cmd_len, data, NULL, data_len); +} diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sf_internal.h b/qemu/roms/u-boot/drivers/mtd/spi/sf_internal.h new file mode 100644 index 000000000..6bcd52204 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sf_internal.h @@ -0,0 +1,159 @@ +/* + * SPI flash internal definitions + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SF_INTERNAL_H_ +#define _SF_INTERNAL_H_ + +#define SPI_FLASH_3B_ADDR_LEN 3 +#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) +#define SPI_FLASH_16MB_BOUN 0x1000000 + +/* CFI Manufacture ID's */ +#define SPI_FLASH_CFI_MFR_SPANSION 0x01 +#define SPI_FLASH_CFI_MFR_STMICRO 0x20 +#define SPI_FLASH_CFI_MFR_MACRONIX 0xc2 +#define SPI_FLASH_CFI_MFR_WINBOND 0xef + +/* Erase commands */ +#define CMD_ERASE_4K 0x20 +#define CMD_ERASE_32K 0x52 +#define CMD_ERASE_CHIP 0xc7 +#define CMD_ERASE_64K 0xd8 + +/* Write commands */ +#define CMD_WRITE_STATUS 0x01 +#define CMD_PAGE_PROGRAM 0x02 +#define CMD_WRITE_DISABLE 0x04 +#define CMD_READ_STATUS 0x05 +#define CMD_QUAD_PAGE_PROGRAM 0x32 +#define CMD_READ_STATUS1 0x35 +#define CMD_WRITE_ENABLE 0x06 +#define CMD_READ_CONFIG 0x35 +#define CMD_FLAG_STATUS 0x70 + +/* Read commands */ +#define CMD_READ_ARRAY_SLOW 0x03 +#define CMD_READ_ARRAY_FAST 0x0b +#define CMD_READ_DUAL_OUTPUT_FAST 0x3b +#define CMD_READ_DUAL_IO_FAST 0xbb +#define CMD_READ_QUAD_OUTPUT_FAST 0x6b +#define CMD_READ_QUAD_IO_FAST 0xeb +#define CMD_READ_ID 0x9f + +/* Bank addr access commands */ +#ifdef CONFIG_SPI_FLASH_BAR +# define CMD_BANKADDR_BRWR 0x17 +# define CMD_BANKADDR_BRRD 0x16 +# define CMD_EXTNADDR_WREAR 0xC5 +# define CMD_EXTNADDR_RDEAR 0xC8 +#endif + +/* Common status */ +#define STATUS_WIP (1 << 0) +#define STATUS_QEB_WINSPAN (1 << 1) +#define STATUS_QEB_MXIC (1 << 6) +#define STATUS_PEC (1 << 7) + +/* Flash timeout values */ +#define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) +#define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) +#define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ) + +/* SST specific */ +#ifdef CONFIG_SPI_FLASH_SST +# define SST_WP 0x01 /* Supports AAI word program */ +# define CMD_SST_BP 0x02 /* Byte Program */ +# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ + +int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, + const void *buf); +#endif + +/* Send a single-byte command to the device and read the response */ +int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len); + +/* + * Send a multi-byte command to the device and read the response. Used + * for flash array reads, etc. + */ +int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +/* + * Send a multi-byte command to the device followed by (optional) + * data. Used for programming the flash array, etc. + */ +int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, + const void *data, size_t data_len); + + +/* Flash erase(sectors) operation, support all possible erase commands */ +int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len); + +/* Read the status register */ +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs); + +/* Program the status register */ +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws); + +/* Read the config register */ +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc); + +/* Program the config register */ +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc); + +/* Enable writing on the SPI flash */ +static inline int spi_flash_cmd_write_enable(struct spi_flash *flash) +{ + return spi_flash_cmd(flash->spi, CMD_WRITE_ENABLE, NULL, 0); +} + +/* Disable writing on the SPI flash */ +static inline int spi_flash_cmd_write_disable(struct spi_flash *flash) +{ + return spi_flash_cmd(flash->spi, CMD_WRITE_DISABLE, NULL, 0); +} + +/* + * Send the read status command to the device and wait for the wip + * (write-in-progress) bit to clear itself. + */ +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout); + +/* + * Used for spi_flash write operation + * - SPI claim + * - spi_flash_cmd_write_enable + * - spi_flash_cmd_write + * - spi_flash_cmd_wait_ready + * - SPI release + */ +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, const void *buf, size_t buf_len); + +/* + * Flash write operation, support all possible write commands. + * Write the requested data out breaking it up into multiple write + * commands as needed per the write size. + */ +int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + size_t len, const void *buf); + +/* + * Same as spi_flash_cmd_read() except it also claims/releases the SPI + * bus. Used as common part of the ->read() operation. + */ +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len); + +/* Flash read operation, support all possible read commands */ +int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + size_t len, void *data); + +#endif /* _SF_INTERNAL_H_ */ diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sf_ops.c b/qemu/roms/u-boot/drivers/mtd/spi/sf_ops.c new file mode 100644 index 000000000..ef91b924d --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sf_ops.c @@ -0,0 +1,518 @@ +/* + * SPI flash operations + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <malloc.h> +#include <spi.h> +#include <spi_flash.h> +#include <watchdog.h> + +#include "sf_internal.h" + +static void spi_flash_addr(u32 addr, u8 *cmd) +{ + /* cmd[0] is actual command */ + cmd[1] = addr >> 16; + cmd[2] = addr >> 8; + cmd[3] = addr >> 0; +} + +int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs) +{ + int ret; + u8 cmd; + + cmd = CMD_READ_STATUS; + ret = spi_flash_read_common(flash, &cmd, 1, rs, 1); + if (ret < 0) { + debug("SF: fail to read status register\n"); + return ret; + } + + return 0; +} + +int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws) +{ + u8 cmd; + int ret; + + cmd = CMD_WRITE_STATUS; + ret = spi_flash_write_common(flash, &cmd, 1, &ws, 1); + if (ret < 0) { + debug("SF: fail to write status register\n"); + return ret; + } + + return 0; +} + +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) +int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc) +{ + int ret; + u8 cmd; + + cmd = CMD_READ_CONFIG; + ret = spi_flash_read_common(flash, &cmd, 1, rc, 1); + if (ret < 0) { + debug("SF: fail to read config register\n"); + return ret; + } + + return 0; +} + +int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc) +{ + u8 data[2]; + u8 cmd; + int ret; + + ret = spi_flash_cmd_read_status(flash, &data[0]); + if (ret < 0) + return ret; + + cmd = CMD_WRITE_STATUS; + data[1] = wc; + ret = spi_flash_write_common(flash, &cmd, 1, &data, 2); + if (ret) { + debug("SF: fail to write config register\n"); + return ret; + } + + return 0; +} +#endif + +#ifdef CONFIG_SPI_FLASH_BAR +static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel) +{ + u8 cmd; + int ret; + + if (flash->bank_curr == bank_sel) { + debug("SF: not require to enable bank%d\n", bank_sel); + return 0; + } + + cmd = flash->bank_write_cmd; + ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1); + if (ret < 0) { + debug("SF: fail to write bank register\n"); + return ret; + } + flash->bank_curr = bank_sel; + + return 0; +} + +static int spi_flash_bank(struct spi_flash *flash, u32 offset) +{ + u8 bank_sel; + int ret; + + bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift); + + ret = spi_flash_cmd_bankaddr_write(flash, bank_sel); + if (ret) { + debug("SF: fail to set bank%d\n", bank_sel); + return ret; + } + + return bank_sel; +} +#endif + +#ifdef CONFIG_SF_DUAL_FLASH +static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr) +{ + switch (flash->dual_flash) { + case SF_DUAL_STACKED_FLASH: + if (*addr >= (flash->size >> 1)) { + *addr -= flash->size >> 1; + flash->spi->flags |= SPI_XFER_U_PAGE; + } else { + flash->spi->flags &= ~SPI_XFER_U_PAGE; + } + break; + case SF_DUAL_PARALLEL_FLASH: + *addr >>= flash->shift; + break; + default: + debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash); + break; + } +} +#endif + +int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) +{ + struct spi_slave *spi = flash->spi; + unsigned long timebase; + unsigned long flags = SPI_XFER_BEGIN; + int ret; + u8 status; + u8 check_status = 0x0; + u8 poll_bit = STATUS_WIP; + u8 cmd = flash->poll_cmd; + + if (cmd == CMD_FLAG_STATUS) { + poll_bit = STATUS_PEC; + check_status = poll_bit; + } + +#ifdef CONFIG_SF_DUAL_FLASH + if (spi->flags & SPI_XFER_U_PAGE) + flags |= SPI_XFER_U_PAGE; +#endif + ret = spi_xfer(spi, 8, &cmd, NULL, flags); + if (ret) { + debug("SF: fail to read %s status register\n", + cmd == CMD_READ_STATUS ? "read" : "flag"); + return ret; + } + + timebase = get_timer(0); + do { + WATCHDOG_RESET(); + + ret = spi_xfer(spi, 8, NULL, &status, 0); + if (ret) + return -1; + + if ((status & poll_bit) == check_status) + break; + + } while (get_timer(timebase) < timeout); + + spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); + + if ((status & poll_bit) == check_status) + return 0; + + /* Timed out */ + debug("SF: time out!\n"); + return -1; +} + +int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, const void *buf, size_t buf_len) +{ + struct spi_slave *spi = flash->spi; + unsigned long timeout = SPI_FLASH_PROG_TIMEOUT; + int ret; + + if (buf == NULL) + timeout = SPI_FLASH_PAGE_ERASE_TIMEOUT; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: unable to claim SPI bus\n"); + return ret; + } + + ret = spi_flash_cmd_write_enable(flash); + if (ret < 0) { + debug("SF: enabling write failed\n"); + return ret; + } + + ret = spi_flash_cmd_write(spi, cmd, cmd_len, buf, buf_len); + if (ret < 0) { + debug("SF: write cmd failed\n"); + return ret; + } + + ret = spi_flash_cmd_wait_ready(flash, timeout); + if (ret < 0) { + debug("SF: write %s timed out\n", + timeout == SPI_FLASH_PROG_TIMEOUT ? + "program" : "page erase"); + return ret; + } + + spi_release_bus(spi); + + return ret; +} + +int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) +{ + u32 erase_size, erase_addr; + u8 cmd[SPI_FLASH_CMD_LEN]; + int ret = -1; + + erase_size = flash->erase_size; + if (offset % erase_size || len % erase_size) { + debug("SF: Erase offset/length not multiple of erase size\n"); + return -1; + } + + cmd[0] = flash->erase_cmd; + while (len) { + erase_addr = offset; + +#ifdef CONFIG_SF_DUAL_FLASH + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &erase_addr); +#endif +#ifdef CONFIG_SPI_FLASH_BAR + ret = spi_flash_bank(flash, erase_addr); + if (ret < 0) + return ret; +#endif + spi_flash_addr(erase_addr, cmd); + + debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], + cmd[2], cmd[3], erase_addr); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); + if (ret < 0) { + debug("SF: erase failed\n"); + break; + } + + offset += erase_size; + len -= erase_size; + } + + return ret; +} + +int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, + size_t len, const void *buf) +{ + unsigned long byte_addr, page_size; + u32 write_addr; + size_t chunk_len, actual; + u8 cmd[SPI_FLASH_CMD_LEN]; + int ret = -1; + + page_size = flash->page_size; + + cmd[0] = flash->write_cmd; + for (actual = 0; actual < len; actual += chunk_len) { + write_addr = offset; + +#ifdef CONFIG_SF_DUAL_FLASH + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &write_addr); +#endif +#ifdef CONFIG_SPI_FLASH_BAR + ret = spi_flash_bank(flash, write_addr); + if (ret < 0) + return ret; +#endif + byte_addr = offset % page_size; + chunk_len = min(len - actual, page_size - byte_addr); + + if (flash->spi->max_write_size) + chunk_len = min(chunk_len, flash->spi->max_write_size); + + spi_flash_addr(write_addr, cmd); + + debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_write_common(flash, cmd, sizeof(cmd), + buf + actual, chunk_len); + if (ret < 0) { + debug("SF: write failed\n"); + break; + } + + offset += chunk_len; + } + + return ret; +} + +int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, + size_t cmd_len, void *data, size_t data_len) +{ + struct spi_slave *spi = flash->spi; + int ret; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: unable to claim SPI bus\n"); + return ret; + } + + ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); + if (ret < 0) { + debug("SF: read cmd failed\n"); + return ret; + } + + spi_release_bus(spi); + + return ret; +} + +int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, + size_t len, void *data) +{ + u8 *cmd, cmdsz; + u32 remain_len, read_len, read_addr; + int bank_sel = 0; + int ret = -1; + + /* Handle memory-mapped SPI */ + if (flash->memory_map) { + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: unable to claim SPI bus\n"); + return ret; + } + spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP); + memcpy(data, flash->memory_map + offset, len); + spi_xfer(flash->spi, 0, NULL, NULL, SPI_XFER_MMAP_END); + spi_release_bus(flash->spi); + return 0; + } + + cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; + cmd = calloc(1, cmdsz); + if (!cmd) { + debug("SF: Failed to allocate cmd\n"); + return -ENOMEM; + } + + cmd[0] = flash->read_cmd; + while (len) { + read_addr = offset; + +#ifdef CONFIG_SF_DUAL_FLASH + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &read_addr); +#endif +#ifdef CONFIG_SPI_FLASH_BAR + bank_sel = spi_flash_bank(flash, read_addr); + if (bank_sel < 0) + return ret; +#endif + remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) * + (bank_sel + 1)) - offset; + if (len < remain_len) + read_len = len; + else + read_len = remain_len; + + spi_flash_addr(read_addr, cmd); + + ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); + if (ret < 0) { + debug("SF: read failed\n"); + break; + } + + offset += read_len; + len -= read_len; + data += read_len; + } + + return ret; +} + +#ifdef CONFIG_SPI_FLASH_SST +static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) +{ + int ret; + u8 cmd[4] = { + CMD_SST_BP, + offset >> 16, + offset >> 8, + offset, + }; + + debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); + + ret = spi_flash_cmd_write_enable(flash); + if (ret) + return ret; + + ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1); + if (ret) + return ret; + + return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); +} + +int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, + const void *buf) +{ + size_t actual, cmd_len; + int ret; + u8 cmd[4]; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + /* If the data is not word aligned, write out leading single byte */ + actual = offset % 2; + if (actual) { + ret = sst_byte_write(flash, offset, buf); + if (ret) + goto done; + } + offset += actual; + + ret = spi_flash_cmd_write_enable(flash); + if (ret) + goto done; + + cmd_len = 4; + cmd[0] = CMD_SST_AAI_WP; + cmd[1] = offset >> 16; + cmd[2] = offset >> 8; + cmd[3] = offset; + + for (; actual < len - 1; actual += 2) { + debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", + spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, + cmd[0], offset); + + ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, + buf + actual, 2); + if (ret) { + debug("SF: sst word program failed\n"); + break; + } + + ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret) + break; + + cmd_len = 1; + offset += 2; + } + + if (!ret) + ret = spi_flash_cmd_write_disable(flash); + + /* If there is a single trailing byte, write it out */ + if (!ret && actual != len) + ret = sst_byte_write(flash, offset, buf + actual); + + done: + debug("SF: sst: program %s %zu bytes @ 0x%zx\n", + ret ? "failure" : "success", len, offset - actual); + + spi_release_bus(flash->spi); + return ret; +} +#endif diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sf_params.c b/qemu/roms/u-boot/drivers/mtd/spi/sf_params.c new file mode 100644 index 000000000..eb372b757 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sf_params.c @@ -0,0 +1,131 @@ +/* + * SPI flash Params table + * + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> + +#include "sf_internal.h" + +/* SPI/QSPI flash device params structure */ +const struct spi_flash_params spi_flash_params_table[] = { +#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */ + {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K}, + {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K}, + {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K}, + {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K}, + {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_EON /* EON */ + {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0}, + {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0}, + {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0}, +#endif +#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */ + {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */ + {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0}, + {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0}, + {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0}, + {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0}, + {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0}, + {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0}, + {"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP}, + {"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, +#endif +#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */ + {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0}, + {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0}, + {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0}, + {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0}, + {"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL064P", 0x010216, 0x4d00, 64 * 1024, 128, RD_FULL, WR_QPP}, + {"S25FL128S_256K", 0x012018, 0x4d00, 256 * 1024, 64, RD_FULL, WR_QPP}, + {"S25FL128S_64K", 0x012018, 0x4d01, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL256S_256K", 0x010219, 0x4d00, 256 * 1024, 128, RD_FULL, WR_QPP}, + {"S25FL256S_64K", 0x010219, 0x4d01, 64 * 1024, 512, RD_FULL, WR_QPP}, + {"S25FL512S_256K", 0x010220, 0x4d00, 256 * 1024, 256, RD_FULL, WR_QPP}, + {"S25FL512S_64K", 0x010220, 0x4d01, 64 * 1024, 1024, RD_FULL, WR_QPP}, +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */ + {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0}, + {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0}, + {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, + {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, + {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, + {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, + {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, + {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, + {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q64A", 0x20bb17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q128", 0x20ba18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"N25Q128A", 0x20bb18, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP}, + {"N25Q256", 0x20ba19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q256A", 0x20bb19, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"N25Q512", 0x20ba20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q512A", 0x20bb20, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024", 0x20ba21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, + {"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K}, +#endif +#ifdef CONFIG_SPI_FLASH_SST /* SST */ + {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, + {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, + {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP}, + {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP}, + {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP}, + {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP}, + {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP}, + {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP}, + {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP}, +#endif +#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */ + {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0}, + {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0}, + {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0}, + {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K}, + {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K}, + {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K}, + {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K}, + {"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64CV", 0xef4017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128BV", 0xef4018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q256", 0xef4019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q80BW", 0xef5014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q16DW", 0xef6015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q32DW", 0xef6016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q64DW", 0xef6017, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, + {"W25Q128FW", 0xef6018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP | SECT_4K}, +#endif + /* + * Note: + * Below paired flash devices has similar spi_flash params. + * (S25FL129P_64K, S25FL128S_64K) + * (W25Q80BL, W25Q80BV) + * (W25Q16CL, W25Q16DV) + * (W25Q32BV, W25Q32FV_SPI) + * (W25Q64CV, W25Q64FV_SPI) + * (W25Q128BV, W25Q128FV_SPI) + * (W25Q32DW, W25Q32FV_QPI) + * (W25Q64DW, W25Q64FV_QPI) + * (W25Q128FW, W25Q128FV_QPI) + */ +}; diff --git a/qemu/roms/u-boot/drivers/mtd/spi/sf_probe.c b/qemu/roms/u-boot/drivers/mtd/spi/sf_probe.c new file mode 100644 index 000000000..0a46fe38d --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/sf_probe.c @@ -0,0 +1,391 @@ +/* + * SPI flash probing + * + * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <malloc.h> +#include <spi.h> +#include <spi_flash.h> +#include <asm/io.h> + +#include "sf_internal.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* Read commands array */ +static u8 spi_read_cmds_array[] = { + CMD_READ_ARRAY_SLOW, + CMD_READ_DUAL_OUTPUT_FAST, + CMD_READ_DUAL_IO_FAST, + CMD_READ_QUAD_OUTPUT_FAST, + CMD_READ_QUAD_IO_FAST, +}; + +#ifdef CONFIG_SPI_FLASH_MACRONIX +static int spi_flash_set_qeb_mxic(struct spi_flash *flash) +{ + u8 qeb_status; + int ret; + + ret = spi_flash_cmd_read_status(flash, &qeb_status); + if (ret < 0) + return ret; + + if (qeb_status & STATUS_QEB_MXIC) { + debug("SF: mxic: QEB is already set\n"); + } else { + ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) +static int spi_flash_set_qeb_winspan(struct spi_flash *flash) +{ + u8 qeb_status; + int ret; + + ret = spi_flash_cmd_read_config(flash, &qeb_status); + if (ret < 0) + return ret; + + if (qeb_status & STATUS_QEB_WINSPAN) { + debug("SF: winspan: QEB is already set\n"); + } else { + ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN); + if (ret < 0) + return ret; + } + + return ret; +} +#endif + +static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0) +{ + switch (idcode0) { +#ifdef CONFIG_SPI_FLASH_MACRONIX + case SPI_FLASH_CFI_MFR_MACRONIX: + return spi_flash_set_qeb_mxic(flash); +#endif +#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) + case SPI_FLASH_CFI_MFR_SPANSION: + case SPI_FLASH_CFI_MFR_WINBOND: + return spi_flash_set_qeb_winspan(flash); +#endif +#ifdef CONFIG_SPI_FLASH_STMICRO + case SPI_FLASH_CFI_MFR_STMICRO: + debug("SF: QEB is volatile for %02x flash\n", idcode0); + return 0; +#endif + default: + printf("SF: Need set QEB func for %02x flash\n", idcode0); + return -1; + } +} + +static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, + u8 *idcode) +{ + const struct spi_flash_params *params; + struct spi_flash *flash; + u8 cmd; + u16 jedec = idcode[1] << 8 | idcode[2]; + u16 ext_jedec = idcode[3] << 8 | idcode[4]; + + params = spi_flash_params_table; + for (; params->name != NULL; params++) { + if ((params->jedec >> 16) == idcode[0]) { + if ((params->jedec & 0xFFFF) == jedec) { + if (params->ext_jedec == 0) + break; + else if (params->ext_jedec == ext_jedec) + break; + } + } + } + + if (!params->name) { + printf("SF: Unsupported flash IDs: "); + printf("manuf %02x, jedec %04x, ext_jedec %04x\n", + idcode[0], jedec, ext_jedec); + return NULL; + } + + flash = calloc(1, sizeof(*flash)); + if (!flash) { + debug("SF: Failed to allocate spi_flash\n"); + return NULL; + } + + /* Assign spi data */ + flash->spi = spi; + flash->name = params->name; + flash->memory_map = spi->memory_map; + flash->dual_flash = flash->spi->option; + + /* Assign spi_flash ops */ + flash->write = spi_flash_cmd_write_ops; +#ifdef CONFIG_SPI_FLASH_SST + if (params->flags & SST_WP) + flash->write = sst_write_wp; +#endif + flash->erase = spi_flash_cmd_erase_ops; + flash->read = spi_flash_cmd_read_ops; + + /* Compute the flash size */ + flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0; + /* + * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the + * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with + * the 0x4d00 Extended JEDEC code have 512b pages. All of the others + * have 256b pages. + */ + if (ext_jedec == 0x4d00) { + if ((jedec == 0x0215) || (jedec == 0x216)) + flash->page_size = 256; + else + flash->page_size = 512; + } else { + flash->page_size = 256; + } + flash->page_size <<= flash->shift; + flash->sector_size = params->sector_size << flash->shift; + flash->size = flash->sector_size * params->nr_sectors << flash->shift; +#ifdef CONFIG_SF_DUAL_FLASH + if (flash->dual_flash & SF_DUAL_STACKED_FLASH) + flash->size <<= 1; +#endif + + /* Compute erase sector and command */ + if (params->flags & SECT_4K) { + flash->erase_cmd = CMD_ERASE_4K; + flash->erase_size = 4096 << flash->shift; + } else if (params->flags & SECT_32K) { + flash->erase_cmd = CMD_ERASE_32K; + flash->erase_size = 32768 << flash->shift; + } else { + flash->erase_cmd = CMD_ERASE_64K; + flash->erase_size = flash->sector_size; + } + + /* Look for the fastest read cmd */ + cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx); + if (cmd) { + cmd = spi_read_cmds_array[cmd - 1]; + flash->read_cmd = cmd; + } else { + /* Go for default supported read cmd */ + flash->read_cmd = CMD_READ_ARRAY_FAST; + } + + /* Not require to look for fastest only two write cmds yet */ + if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP) + flash->write_cmd = CMD_QUAD_PAGE_PROGRAM; + else + /* Go for default supported write cmd */ + flash->write_cmd = CMD_PAGE_PROGRAM; + + /* Set the quad enable bit - only for quad commands */ + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { + if (spi_flash_set_qeb(flash, idcode[0])) { + debug("SF: Fail to set QEB for %02x\n", idcode[0]); + return NULL; + } + } + + /* Read dummy_byte: dummy byte is determined based on the + * dummy cycles of a particular command. + * Fast commands - dummy_byte = dummy_cycles/8 + * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8 + * For I/O commands except cmd[0] everything goes on no.of lines + * based on particular command but incase of fast commands except + * data all go on single line irrespective of command. + */ + switch (flash->read_cmd) { + case CMD_READ_QUAD_IO_FAST: + flash->dummy_byte = 2; + break; + case CMD_READ_ARRAY_SLOW: + flash->dummy_byte = 0; + break; + default: + flash->dummy_byte = 1; + } + + /* Poll cmd selection */ + flash->poll_cmd = CMD_READ_STATUS; +#ifdef CONFIG_SPI_FLASH_STMICRO + if (params->flags & E_FSR) + flash->poll_cmd = CMD_FLAG_STATUS; +#endif + + /* Configure the BAR - discover bank cmds and read current bank */ +#ifdef CONFIG_SPI_FLASH_BAR + u8 curr_bank = 0; + if (flash->size > SPI_FLASH_16MB_BOUN) { + flash->bank_read_cmd = (idcode[0] == 0x01) ? + CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR; + flash->bank_write_cmd = (idcode[0] == 0x01) ? + CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR; + + if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1, + &curr_bank, 1)) { + debug("SF: fail to read bank addr register\n"); + return NULL; + } + flash->bank_curr = curr_bank; + } else { + flash->bank_curr = curr_bank; + } +#endif + + /* Flash powers up read-only, so clear BP# bits */ +#if defined(CONFIG_SPI_FLASH_ATMEL) || \ + defined(CONFIG_SPI_FLASH_MACRONIX) || \ + defined(CONFIG_SPI_FLASH_SST) + spi_flash_cmd_write_status(flash, 0); +#endif + + return flash; +} + +#ifdef CONFIG_OF_CONTROL +int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) +{ + fdt_addr_t addr; + fdt_size_t size; + int node; + + /* If there is no node, do nothing */ + node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); + if (node < 0) + return 0; + + addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); + if (addr == FDT_ADDR_T_NONE) { + debug("%s: Cannot decode address\n", __func__); + return 0; + } + + if (flash->size != size) { + debug("%s: Memory map must cover entire device\n", __func__); + return -1; + } + flash->memory_map = map_sysmem(addr, size); + + return 0; +} +#endif /* CONFIG_OF_CONTROL */ + +static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) +{ + struct spi_flash *flash = NULL; + u8 idcode[5]; + int ret; + + /* Setup spi_slave */ + if (!spi) { + printf("SF: Failed to set up slave\n"); + return NULL; + } + + /* Claim spi bus */ + ret = spi_claim_bus(spi); + if (ret) { + debug("SF: Failed to claim SPI bus: %d\n", ret); + goto err_claim_bus; + } + + /* Read the ID codes */ + ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode)); + if (ret) { + printf("SF: Failed to get idcodes\n"); + goto err_read_id; + } + +#ifdef DEBUG + printf("SF: Got idcodes\n"); + print_buffer(0, idcode, 1, sizeof(idcode), 0); +#endif + + /* Validate params from spi_flash_params table */ + flash = spi_flash_validate_params(spi, idcode); + if (!flash) + goto err_read_id; + +#ifdef CONFIG_OF_CONTROL + if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { + debug("SF: FDT decode error\n"); + goto err_read_id; + } +#endif +#ifndef CONFIG_SPL_BUILD + printf("SF: Detected %s with page size ", flash->name); + print_size(flash->page_size, ", erase size "); + print_size(flash->erase_size, ", total "); + print_size(flash->size, ""); + if (flash->memory_map) + printf(", mapped at %p", flash->memory_map); + puts("\n"); +#endif +#ifndef CONFIG_SPI_FLASH_BAR + if (((flash->dual_flash == SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN)) || + ((flash->dual_flash > SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN << 1))) { + puts("SF: Warning - Only lower 16MiB accessible,"); + puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); + } +#endif + + /* Release spi bus */ + spi_release_bus(spi); + + return flash; + +err_read_id: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + return spi_flash_probe_slave(spi); +} + +#ifdef CONFIG_OF_SPI_FLASH +struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, + int spi_node) +{ + struct spi_slave *spi; + + spi = spi_setup_slave_fdt(blob, slave_node, spi_node); + return spi_flash_probe_slave(spi); +} +#endif + +void spi_flash_free(struct spi_flash *flash) +{ + spi_free_slave(flash->spi); + free(flash); +} diff --git a/qemu/roms/u-boot/drivers/mtd/spi/spi_spl_load.c b/qemu/roms/u-boot/drivers/mtd/spi/spi_spl_load.c new file mode 100644 index 000000000..1954b7e88 --- /dev/null +++ b/qemu/roms/u-boot/drivers/mtd/spi/spi_spl_load.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2011 OMICRON electronics GmbH + * + * based on drivers/mtd/nand/nand_spl_load.c + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> +#include <spl.h> + +#ifdef CONFIG_SPL_OS_BOOT +/* + * Load the kernel, check for a valid header we can parse, and if found load + * the kernel and then device tree. + */ +static int spi_load_image_os(struct spi_flash *flash, + struct image_header *header) +{ + /* Read for a header, parse or error out. */ + spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, 0x40, + (void *)header); + + if (image_get_magic(header) != IH_MAGIC) + return -1; + + spl_parse_image_header(header); + + spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, + spl_image.size, (void *)spl_image.load_addr); + + /* Read device tree. */ + spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS, + CONFIG_SYS_SPI_ARGS_SIZE, + (void *)CONFIG_SYS_SPL_ARGS_ADDR); + + return 0; +} +#endif + +/* + * The main entry for SPI booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from SPI into SDRAM and starts it from there. + */ +void spl_spi_load_image(void) +{ + struct spi_flash *flash; + struct image_header *header; + + /* + * Load U-Boot image from SPI flash into RAM + */ + + flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS, + CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3); + if (!flash) { + puts("SPI probe failed.\n"); + hang(); + } + + /* use CONFIG_SYS_TEXT_BASE as temporary storage area */ + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + +#ifdef CONFIG_SPL_OS_BOOT + if (spl_start_uboot() || spi_load_image_os(flash, header)) +#endif + { + /* Load u-boot, mkimage header is 64 bytes. */ + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, + (void *)header); + spl_parse_image_header(header); + spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); + } +} |