1 files changed, 513 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/drivers/mmc/sdhci.c b/qemu/roms/u-boot/drivers/mmc/sdhci.c
new file mode 100644
index 000000000..3125d13ba
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/mmc/sdhci.c
@@ -0,0 +1,513 @@
+/*
+ * Copyright 2011, Marvell Semiconductor Inc.
+ * Lei Wen <leiwen@marvell.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <sdhci.h>
+
+void *aligned_buffer;
+
+static void sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+	unsigned long timeout;
+
+	/* Wait max 100 ms */
+	timeout = 100;
+	sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+	while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
+		if (timeout == 0) {
+			printf("%s: Reset 0x%x never completed.\n",
+			       __func__, (int)mask);
+			return;
+		}
+		timeout--;
+		udelay(1000);
+	}
+}
+
+static void sdhci_cmd_done(struct sdhci_host *host, struct mmc_cmd *cmd)
+{
+	int i;
+	if (cmd->resp_type & MMC_RSP_136) {
+		/* CRC is stripped so we need to do some shifting. */
+		for (i = 0; i < 4; i++) {
+			cmd->response[i] = sdhci_readl(host,
+					SDHCI_RESPONSE + (3-i)*4) << 8;
+			if (i != 3)
+				cmd->response[i] |= sdhci_readb(host,
+						SDHCI_RESPONSE + (3-i)*4-1);
+		}
+	} else {
+		cmd->response[0] = sdhci_readl(host, SDHCI_RESPONSE);
+	}
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
+{
+	int i;
+	char *offs;
+	for (i = 0; i < data->blocksize; i += 4) {
+		offs = data->dest + i;
+		if (data->flags == MMC_DATA_READ)
+			*(u32 *)offs = sdhci_readl(host, SDHCI_BUFFER);
+		else
+			sdhci_writel(host, *(u32 *)offs, SDHCI_BUFFER);
+	}
+}
+
+static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
+				unsigned int start_addr)
+{
+	unsigned int stat, rdy, mask, timeout, block = 0;
+#ifdef CONFIG_MMC_SDMA
+	unsigned char ctrl;
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~SDHCI_CTRL_DMA_MASK;
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+#endif
+
+	timeout = 1000000;
+	rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
+	mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
+	do {
+		stat = sdhci_readl(host, SDHCI_INT_STATUS);
+		if (stat & SDHCI_INT_ERROR) {
+			printf("%s: Error detected in status(0x%X)!\n",
+			       __func__, stat);
+			return -1;
+		}
+		if (stat & rdy) {
+			if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
+				continue;
+			sdhci_writel(host, rdy, SDHCI_INT_STATUS);
+			sdhci_transfer_pio(host, data);
+			data->dest += data->blocksize;
+			if (++block >= data->blocks)
+				break;
+		}
+#ifdef CONFIG_MMC_SDMA
+		if (stat & SDHCI_INT_DMA_END) {
+			sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS);
+			start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
+			start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
+			sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
+		}
+#endif
+		if (timeout-- > 0)
+			udelay(10);
+		else {
+			printf("%s: Transfer data timeout\n", __func__);
+			return -1;
+		}
+	} while (!(stat & SDHCI_INT_DATA_END));
+	return 0;
+}
+
+/*
+ * No command will be sent by driver if card is busy, so driver must wait
+ * for card ready state.
+ * Every time when card is busy after timeout then (last) timeout value will be
+ * increased twice but only if it doesn't exceed global defined maximum.
+ * Each function call will use last timeout value. Max timeout can be redefined
+ * in board config file.
+ */
+#ifndef CONFIG_SDHCI_CMD_MAX_TIMEOUT
+#define CONFIG_SDHCI_CMD_MAX_TIMEOUT		3200
+#endif
+#define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT	100
+
+int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
+		       struct mmc_data *data)
+{
+	struct sdhci_host *host = mmc->priv;
+	unsigned int stat = 0;
+	int ret = 0;
+	int trans_bytes = 0, is_aligned = 1;
+	u32 mask, flags, mode;
+	unsigned int time = 0, start_addr = 0;
+	unsigned int retry = 10000;
+	int mmc_dev = mmc->block_dev.dev;
+
+	/* Timeout unit - ms */
+	static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
+
+	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
+	mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
+
+	/* We shouldn't wait for data inihibit for stop commands, even
+	   though they might use busy signaling */
+	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+		mask &= ~SDHCI_DATA_INHIBIT;
+
+	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+		if (time >= cmd_timeout) {
+			printf("%s: MMC: %d busy ", __func__, mmc_dev);
+			if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
+				cmd_timeout += cmd_timeout;
+				printf("timeout increasing to: %u ms.\n",
+				       cmd_timeout);
+			} else {
+				puts("timeout.\n");
+				return COMM_ERR;
+			}
+		}
+		time++;
+		udelay(1000);
+	}
+
+	mask = SDHCI_INT_RESPONSE;
+	if (!(cmd->resp_type & MMC_RSP_PRESENT))
+		flags = SDHCI_CMD_RESP_NONE;
+	else if (cmd->resp_type & MMC_RSP_136)
+		flags = SDHCI_CMD_RESP_LONG;
+	else if (cmd->resp_type & MMC_RSP_BUSY) {
+		flags = SDHCI_CMD_RESP_SHORT_BUSY;
+		mask |= SDHCI_INT_DATA_END;
+	} else
+		flags = SDHCI_CMD_RESP_SHORT;
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= SDHCI_CMD_CRC;
+	if (cmd->resp_type & MMC_RSP_OPCODE)
+		flags |= SDHCI_CMD_INDEX;
+	if (data)
+		flags |= SDHCI_CMD_DATA;
+
+	/* Set Transfer mode regarding to data flag */
+	if (data != 0) {
+		sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
+		mode = SDHCI_TRNS_BLK_CNT_EN;
+		trans_bytes = data->blocks * data->blocksize;
+		if (data->blocks > 1)
+			mode |= SDHCI_TRNS_MULTI;
+
+		if (data->flags == MMC_DATA_READ)
+			mode |= SDHCI_TRNS_READ;
+
+#ifdef CONFIG_MMC_SDMA
+		if (data->flags == MMC_DATA_READ)
+			start_addr = (unsigned int)data->dest;
+		else
+			start_addr = (unsigned int)data->src;
+		if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
+				(start_addr & 0x7) != 0x0) {
+			is_aligned = 0;
+			start_addr = (unsigned int)aligned_buffer;
+			if (data->flags != MMC_DATA_READ)
+				memcpy(aligned_buffer, data->src, trans_bytes);
+		}
+
+		sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
+		mode |= SDHCI_TRNS_DMA;
+#endif
+		sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+				data->blocksize),
+				SDHCI_BLOCK_SIZE);
+		sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+		sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+	}
+
+	sdhci_writel(host, cmd->cmdarg, SDHCI_ARGUMENT);
+#ifdef CONFIG_MMC_SDMA
+	flush_cache(start_addr, trans_bytes);
+#endif
+	sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
+	do {
+		stat = sdhci_readl(host, SDHCI_INT_STATUS);
+		if (stat & SDHCI_INT_ERROR)
+			break;
+		if (--retry == 0)
+			break;
+	} while ((stat & mask) != mask);
+
+	if (retry == 0) {
+		if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
+			return 0;
+		else {
+			printf("%s: Timeout for status update!\n", __func__);
+			return TIMEOUT;
+		}
+	}
+
+	if ((stat & (SDHCI_INT_ERROR | mask)) == mask) {
+		sdhci_cmd_done(host, cmd);
+		sdhci_writel(host, mask, SDHCI_INT_STATUS);
+	} else
+		ret = -1;
+
+	if (!ret && data)
+		ret = sdhci_transfer_data(host, data, start_addr);
+
+	if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
+		udelay(1000);
+
+	stat = sdhci_readl(host, SDHCI_INT_STATUS);
+	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
+	if (!ret) {
+		if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
+				!is_aligned && (data->flags == MMC_DATA_READ))
+			memcpy(data->dest, aligned_buffer, trans_bytes);
+		return 0;
+	}
+
+	sdhci_reset(host, SDHCI_RESET_CMD);
+	sdhci_reset(host, SDHCI_RESET_DATA);
+	if (stat & SDHCI_INT_TIMEOUT)
+		return TIMEOUT;
+	else
+		return COMM_ERR;
+}
+
+static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
+{
+	struct sdhci_host *host = mmc->priv;
+	unsigned int div, clk, timeout;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return 0;
+
+	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+		/* Version 3.00 divisors must be a multiple of 2. */
+		if (mmc->cfg->f_max <= clock)
+			div = 1;
+		else {
+			for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
+				if ((mmc->cfg->f_max / div) <= clock)
+					break;
+			}
+		}
+	} else {
+		/* Version 2.00 divisors must be a power of 2. */
+		for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
+			if ((mmc->cfg->f_max / div) <= clock)
+				break;
+		}
+	}
+	div >>= 1;
+
+	if (host->set_clock)
+		host->set_clock(host->index, div);
+
+	clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+	clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
+		<< SDHCI_DIVIDER_HI_SHIFT;
+	clk |= SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			printf("%s: Internal clock never stabilised.\n",
+			       __func__);
+			return -1;
+		}
+		timeout--;
+		udelay(1000);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+	return 0;
+}
+
+static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+{
+	u8 pwr = 0;
+
+	if (power != (unsigned short)-1) {
+		switch (1 << power) {
+		case MMC_VDD_165_195:
+			pwr = SDHCI_POWER_180;
+			break;
+		case MMC_VDD_29_30:
+		case MMC_VDD_30_31:
+			pwr = SDHCI_POWER_300;
+			break;
+		case MMC_VDD_32_33:
+		case MMC_VDD_33_34:
+			pwr = SDHCI_POWER_330;
+			break;
+		}
+	}
+
+	if (pwr == 0) {
+		sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+		return;
+	}
+
+	if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+		sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+	pwr |= SDHCI_POWER_ON;
+
+	sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+}
+
+void sdhci_set_ios(struct mmc *mmc)
+{
+	u32 ctrl;
+	struct sdhci_host *host = mmc->priv;
+
+	if (host->set_control_reg)
+		host->set_control_reg(host);
+
+	if (mmc->clock != host->clock)
+		sdhci_set_clock(mmc, mmc->clock);
+
+	/* Set bus width */
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+	if (mmc->bus_width == 8) {
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
+				(host->quirks & SDHCI_QUIRK_USE_WIDE8))
+			ctrl |= SDHCI_CTRL_8BITBUS;
+	} else {
+		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+			ctrl &= ~SDHCI_CTRL_8BITBUS;
+		if (mmc->bus_width == 4)
+			ctrl |= SDHCI_CTRL_4BITBUS;
+		else
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+	}
+
+	if (mmc->clock > 26000000)
+		ctrl |= SDHCI_CTRL_HISPD;
+	else
+		ctrl &= ~SDHCI_CTRL_HISPD;
+
+	if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+		ctrl &= ~SDHCI_CTRL_HISPD;
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+int sdhci_init(struct mmc *mmc)
+{
+	struct sdhci_host *host = mmc->priv;
+
+	if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
+		aligned_buffer = memalign(8, 512*1024);
+		if (!aligned_buffer) {
+			printf("%s: Aligned buffer alloc failed!!!\n",
+			       __func__);
+			return -1;
+		}
+	}
+
+	sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
+
+	if (host->quirks & SDHCI_QUIRK_NO_CD) {
+		unsigned int status;
+
+		sdhci_writel(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST,
+			SDHCI_HOST_CONTROL);
+
+		status = sdhci_readl(host, SDHCI_PRESENT_STATE);
+		while ((!(status & SDHCI_CARD_PRESENT)) ||
+		    (!(status & SDHCI_CARD_STATE_STABLE)) ||
+		    (!(status & SDHCI_CARD_DETECT_PIN_LEVEL)))
+			status = sdhci_readl(host, SDHCI_PRESENT_STATE);
+	}
+
+	/* Enable only interrupts served by the SD controller */
+	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+		     SDHCI_INT_ENABLE);
+	/* Mask all sdhci interrupt sources */
+	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
+
+	return 0;
+}
+
+
+static const struct mmc_ops sdhci_ops = {
+	.send_cmd	= sdhci_send_command,
+	.set_ios	= sdhci_set_ios,
+	.init		= sdhci_init,
+};
+
+int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+{
+	unsigned int caps;
+
+	host->cfg.name = host->name;
+	host->cfg.ops = &sdhci_ops;
+
+	caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#ifdef CONFIG_MMC_SDMA
+	if (!(caps & SDHCI_CAN_DO_SDMA)) {
+		printf("%s: Your controller doesn't support SDMA!!\n",
+		       __func__);
+		return -1;
+	}
+#endif
+
+	if (max_clk)
+		host->cfg.f_max = max_clk;
+	else {
+		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+			host->cfg.f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
+				>> SDHCI_CLOCK_BASE_SHIFT;
+		else
+			host->cfg.f_max = (caps & SDHCI_CLOCK_BASE_MASK)
+				>> SDHCI_CLOCK_BASE_SHIFT;
+		host->cfg.f_max *= 1000000;
+	}
+	if (host->cfg.f_max == 0) {
+		printf("%s: Hardware doesn't specify base clock frequency\n",
+		       __func__);
+		return -1;
+	}
+	if (min_clk)
+		host->cfg.f_min = min_clk;
+	else {
+		if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+			host->cfg.f_min = host->cfg.f_max /
+				SDHCI_MAX_DIV_SPEC_300;
+		else
+			host->cfg.f_min = host->cfg.f_max /
+				SDHCI_MAX_DIV_SPEC_200;
+	}
+
+	host->cfg.voltages = 0;
+	if (caps & SDHCI_CAN_VDD_330)
+		host->cfg.voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+	if (caps & SDHCI_CAN_VDD_300)
+		host->cfg.voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+	if (caps & SDHCI_CAN_VDD_180)
+		host->cfg.voltages |= MMC_VDD_165_195;
+
+	if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
+		host->cfg.voltages |= host->voltages;
+
+	host->cfg.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+	if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+		if (caps & SDHCI_CAN_DO_8BIT)
+			host->cfg.host_caps |= MMC_MODE_8BIT;
+	}
+	if (host->host_caps)
+		host->cfg.host_caps |= host->host_caps;
+
+	host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+	sdhci_reset(host, SDHCI_RESET_ALL);
+
+	host->mmc = mmc_create(&host->cfg, host);
+	if (host->mmc == NULL) {
+		printf("%s: mmc create fail!\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}