diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/mmc/s5p_sdhci.c')
| -rw-r--r-- | qemu/roms/u-boot/drivers/mmc/s5p_sdhci.c | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/mmc/s5p_sdhci.c b/qemu/roms/u-boot/drivers/mmc/s5p_sdhci.c new file mode 100644 index 000000000..ccae4ccae --- /dev/null +++ b/qemu/roms/u-boot/drivers/mmc/s5p_sdhci.c @@ -0,0 +1,217 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung <jh80.chung@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <asm/gpio.h> +#include <asm/arch/mmc.h> +#include <asm/arch/clk.h> +#include <errno.h> +#ifdef CONFIG_OF_CONTROL +#include <asm/arch/pinmux.h> +#endif + +static char *S5P_NAME = "SAMSUNG SDHCI"; +static void s5p_sdhci_set_control_reg(struct sdhci_host *host) +{ + unsigned long val, ctrl; + /* + * SELCLKPADDS[17:16] + * 00 = 2mA + * 01 = 4mA + * 10 = 7mA + * 11 = 9mA + */ + sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4); + + val = sdhci_readl(host, SDHCI_CONTROL2); + val &= SDHCI_CTRL2_SELBASECLK_SHIFT; + + val |= SDHCI_CTRL2_ENSTAASYNCCLR | + SDHCI_CTRL2_ENCMDCNFMSK | + SDHCI_CTRL2_ENFBCLKRX | + SDHCI_CTRL2_ENCLKOUTHOLD; + + sdhci_writel(host, val, SDHCI_CONTROL2); + + /* + * FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7] + * FCSel[1:0] : Rx Feedback Clock Delay Control + * Inverter delay means10ns delay if SDCLK 50MHz setting + * 01 = Delay1 (basic delay) + * 11 = Delay2 (basic delay + 2ns) + * 00 = Delay3 (inverter delay) + * 10 = Delay4 (inverter delay + 2ns) + */ + val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1; + sdhci_writel(host, val, SDHCI_CONTROL3); + + /* + * SELBASECLK[5:4] + * 00/01 = HCLK + * 10 = EPLL + * 11 = XTI or XEXTCLK + */ + ctrl = sdhci_readl(host, SDHCI_CONTROL2); + ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3); + ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2); + sdhci_writel(host, ctrl, SDHCI_CONTROL2); +} + +int s5p_sdhci_init(u32 regbase, int index, int bus_width) +{ + struct sdhci_host *host = NULL; + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("sdhci__host malloc fail!\n"); + return 1; + } + + host->name = S5P_NAME; + host->ioaddr = (void *)regbase; + + host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8; + host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + host->set_control_reg = &s5p_sdhci_set_control_reg; + host->set_clock = set_mmc_clk; + host->index = index; + + host->host_caps = MMC_MODE_HC; + if (bus_width == 8) + host->host_caps |= MMC_MODE_8BIT; + + return add_sdhci(host, 52000000, 400000); +} + +#ifdef CONFIG_OF_CONTROL +struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS]; + +static int do_sdhci_init(struct sdhci_host *host) +{ + int dev_id, flag; + int err = 0; + + flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; + dev_id = host->index + PERIPH_ID_SDMMC0; + + if (fdt_gpio_isvalid(&host->pwr_gpio)) { + gpio_direction_output(host->pwr_gpio.gpio, 1); + err = exynos_pinmux_config(dev_id, flag); + if (err) { + debug("MMC not configured\n"); + return err; + } + } + + if (fdt_gpio_isvalid(&host->cd_gpio)) { + gpio_direction_output(host->cd_gpio.gpio, 0xf); + if (gpio_get_value(host->cd_gpio.gpio)) + return -ENODEV; + + err = exynos_pinmux_config(dev_id, flag); + if (err) { + printf("external SD not configured\n"); + return err; + } + } + + host->name = S5P_NAME; + + host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_WAIT_SEND_CMD; + host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + host->set_control_reg = &s5p_sdhci_set_control_reg; + host->set_clock = set_mmc_clk; + + host->host_caps = MMC_MODE_HC; + + return add_sdhci(host, 52000000, 400000); +} + +static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host) +{ + int bus_width, dev_id; + unsigned int base; + + /* Get device id */ + dev_id = pinmux_decode_periph_id(blob, node); + if (dev_id < PERIPH_ID_SDMMC0 && dev_id > PERIPH_ID_SDMMC3) { + debug("MMC: Can't get device id\n"); + return -1; + } + host->index = dev_id - PERIPH_ID_SDMMC0; + + /* Get bus width */ + bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (bus_width <= 0) { + debug("MMC: Can't get bus-width\n"); + return -1; + } + host->bus_width = bus_width; + + /* Get the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { + debug("MMC: Can't get base address\n"); + return -1; + } + host->ioaddr = (void *)base; + + fdtdec_decode_gpio(blob, node, "pwr-gpios", &host->pwr_gpio); + fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio); + + return 0; +} + +static int process_nodes(const void *blob, int node_list[], int count) +{ + struct sdhci_host *host; + int i, node; + + debug("%s: count = %d\n", __func__, count); + + /* build sdhci_host[] for each controller */ + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) + continue; + + host = &sdhci_host[i]; + + if (sdhci_get_config(blob, node, host)) { + printf("%s: failed to decode dev %d\n", __func__, i); + return -1; + } + do_sdhci_init(host); + } + return 0; +} + +int exynos_mmc_init(const void *blob) +{ + int count; + int node_list[SDHCI_MAX_HOSTS]; + + count = fdtdec_find_aliases_for_id(blob, "mmc", + COMPAT_SAMSUNG_EXYNOS_MMC, node_list, + SDHCI_MAX_HOSTS); + + process_nodes(blob, node_list, count); + + return 1; +} +#endif |