diff options
Diffstat (limited to 'qemu/roms/u-boot/drivers/dma/omap3_dma.c')
-rw-r--r-- | qemu/roms/u-boot/drivers/dma/omap3_dma.c | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/qemu/roms/u-boot/drivers/dma/omap3_dma.c b/qemu/roms/u-boot/drivers/dma/omap3_dma.c new file mode 100644 index 000000000..3320b3d08 --- /dev/null +++ b/qemu/roms/u-boot/drivers/dma/omap3_dma.c @@ -0,0 +1,167 @@ +/* Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* This is a basic implementation of the SDMA/DMA4 controller of OMAP3 + * Tested on Silicon Revision major:0x4 minor:0x0 + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> +#include <asm/arch/dma.h> +#include <asm/io.h> +#include <asm/errno.h> + +static struct dma4 *dma4_cfg = (struct dma4 *)OMAP34XX_DMA4_BASE; +uint32_t dma_active; /* if a transfer is started the respective + bit is set for the logical channel */ + +/* Check if we have the given channel + * PARAMETERS: + * chan: Channel number + * + * RETURN of non-zero means error */ +static inline int check_channel(uint32_t chan) +{ + if (chan < CHAN_NR_MIN || chan > CHAN_NR_MAX) + return -EINVAL; + return 0; +} + +static inline void reset_irq(uint32_t chan) +{ + /* reset IRQ reason */ + writel(0x1DFE, &dma4_cfg->chan[chan].csr); + /* reset IRQ */ + writel((1 << chan), &dma4_cfg->irqstatus_l[0]); + dma_active &= ~(1 << chan); +} + +/* Set Source, Destination and Size of DMA transfer for the + * specified channel. + * PARAMETERS: + * chan: channel to use + * src: source of the transfer + * dst: destination of the transfer + * sze: Size of the transfer + * + * RETURN of non-zero means error */ +int omap3_dma_conf_transfer(uint32_t chan, uint32_t *src, uint32_t *dst, + uint32_t sze) +{ + if (check_channel(chan)) + return -EINVAL; + /* CDSA0 */ + writel((uint32_t)src, &dma4_cfg->chan[chan].cssa); + writel((uint32_t)dst, &dma4_cfg->chan[chan].cdsa); + writel(sze, &dma4_cfg->chan[chan].cen); +return 0; +} + +/* Start the DMA transfer */ +int omap3_dma_start_transfer(uint32_t chan) +{ + uint32_t val; + + if (check_channel(chan)) + return -EINVAL; + + val = readl(&dma4_cfg->chan[chan].ccr); + /* Test for channel already in use */ + if (val & CCR_ENABLE_ENABLE) + return -EBUSY; + + writel((val | CCR_ENABLE_ENABLE), &dma4_cfg->chan[chan].ccr); + dma_active |= (1 << chan); + debug("started transfer...\n"); + return 0; +} + +/* Busy-waiting for a DMA transfer + * This has to be called before another transfer is started + * PARAMETER + * chan: Channel to wait for + * + * RETURN of non-zero means error*/ +int omap3_dma_wait_for_transfer(uint32_t chan) +{ + uint32_t val; + + if (!(dma_active & (1 << chan))) { + val = readl(&dma4_cfg->irqstatus_l[0]); + if (!(val & chan)) { + debug("dma: The channel you are trying to wait for " + "was never activated - ERROR\n"); + return -1; /* channel was never active */ + } + } + + /* all irqs on line 0 */ + while (!(readl(&dma4_cfg->irqstatus_l[0]) & (1 << chan))) + asm("nop"); + + val = readl(&dma4_cfg->chan[chan].csr); + if ((val & CSR_TRANS_ERR) | (val & CSR_SUPERVISOR_ERR) | + (val & CSR_MISALIGNED_ADRS_ERR)) { + debug("err code: %X\n", val); + debug("dma: transfer error detected\n"); + reset_irq(chan); + return -1; + } + reset_irq(chan); + return 0; +} + +/* Get the revision of the DMA module + * PARAMETER + * minor: Address of minor revision to write + * major: Address of major revision to write + * + * RETURN of non-zero means error + */ +int omap3_dma_get_revision(uint32_t *minor, uint32_t *major) +{ + uint32_t val; + + /* debug information */ + val = readl(&dma4_cfg->revision); + *major = (val & 0x000000F0) >> 4; + *minor = (val & 0x0000000F); + debug("DMA Silicon revision (maj/min): 0x%X/0x%X\n", *major, *minor); + return 0; +} + +/* Initial config of omap dma + */ +void omap3_dma_init(void) +{ + dma_active = 0; + /* All interrupts on channel 0 */ + writel(0xFFFFFFFF, &dma4_cfg->irqenable_l[0]); +} + +/* set channel config to config + * + * RETURN of non-zero means error */ +int omap3_dma_conf_chan(uint32_t chan, struct dma4_chan *config) +{ + if (check_channel(chan)) + return -EINVAL; + + dma4_cfg->chan[chan] = *config; + return 0; +} + +/* get channel config to config + * + * RETURN of non-zero means error */ +int omap3_dma_get_conf_chan(uint32_t chan, struct dma4_chan *config) +{ + if (check_channel(chan)) + return -EINVAL; + *config = dma4_cfg->chan[chan]; + return 0; +} |